Search results for " modelling"
showing 10 items of 1055 documents
Visual indicator for the detection of end-of-life criterion for composite high pressure vessels for hydrogen storage
2012
International audience; A model to predict the accumulation of fibre breaks in advanced composites, that takes into account all physical phenomena implicated in fibre failure (i.e. the random nature, stress transfer due to breaks, fibre debonding and viscosity of the matrix) shows clearly that the failure of a unidirectional composite structure results in the formation of random fibre breaks which at higher loads coalesce into clusters of broken fibres. This stage of development is followed almost immediately by failure. This has direct application to filament wound pressure vessels of the type used to store hydrogen under high pressure. A novel, cost effective, method of revealing developi…
Modelling of a recirculating photocatalytic microreactor implementing mesoporous N-TiO2 modified with graphene
2020
Abstract The use of microreactors in (photo)catalytic processes offers new possibilities for studying and optimizing many mass and photon transfer limited reactions. In this study, we propose a scalable computational fluid dynamics (CFD) model for the prediction of photocatalytic degradation of a model pollutant (4-nitrophenol) using immobilized N-doped TiO2 grown over reduced graphene oxide (N-TiO2/rGO) in a photocatalytic microreactor working in continuous flow-recirculation mode. The mode of operation used in this study allows the reduction of mass transfer limitations inherent to heterogeneous photocatalytic reactions taking place on immobilized catalysts. A CFD model was developed for …
Characterization of Non-linear Inductors Including Thermal Effects for Power Applications
2018
This paper is focused on the behaviour of non-linear inductors employed in DC/DC switching converters considering the effects due to variations of both current and temperature. The characterization of the inductors is performed by a buck converter operated to stimulate the inductor under test by a constant current with superimposed a large signal. The measurements are carried out at several inductor’s temperature values. Data are automatically collected by a novel virtual instrument developed by the authors in LabVIEW® environment aiming to obtain a polynomial based analytical model. The deep knowledge of the inductor model allows its design to be optimized improving the power density of th…
Modelling intergranular and transgranular micro-cracking in polycrystalline materials
2018
Abstract In this work, a grain boundary formulation for intergranular and transgranular micro-cracking in three-dimensional polycrystalline aggregates is presented. The formulation is based on the displacement and stress boundary integral equations of solid mechanics and it has the advantage of expressing the polycrystalline problem in terms of grain boundary variables only. The individual grains within the polycrystalline morphology are modelled as generally anisotropic linear elastic domains with random spatial orientation. Transgranular micro-cracking is assumed to occur along specific cleavage planes, whose orientation in space within the grains depend upon the crystallographic lattice.…
Mode I failure modeling of friction stir welding joints
2008
This paper analyzes mechanical response by finite element method up to the decohesion failure in fracture mode I for joints of friction stir welding (FSW) of an aluminum alloy. It first describes experimental investigations on specimens with FSW embedded, subjected to uniform traction and local punch tests used to characterize local elastic and plastic material parameters. The heterogeneity of the mechanical properties induced by the FSW process is taken into account for the elastic-plastic finite element simulation. The growing damage and the opening failure of the welding zone are described by the adoption of a cohesive interface model with specific mechanical properties.
X-ray micro-tomography based FEM modelling of hygroexpansion in PLA composites reinforced with birch pulp fibres
2017
This article presents a microscale modelling approach coupled with X-ray computed micro-tomography for the evaluation of material properties of polylactic acid (PLA) reinforced by birch pulp fibers under the effect of moisture. The results in terms of elastic moduli and hygroexpansion deformation were found in good agreement with the measurements taken at different levels of water uptake.
Novel hybrid polymer composites with graphene and MXene nano-reinforcements: computational analysis
2021
This paper presents a computational analysis on the mechanical and damage behavior of novel hybrid polymer composites with graphene and MXene nano-reinforcements targeted for flexible electronics and advanced high-strength structural applications with additional functions, such as real-time monitoring of structural integrity. Geometrical models of three-dimensional representative volume elements of various configurations were generated, and a computational model based on the micromechanical finite element method was developed and solved using an explicit dynamic solver. The influence of the geometrical orientation, aspect ratio, and volume fractions of the inclusions, as well as the interfa…
Stochastic resonance in a metal-oxide memristive device
2021
Abstract The stochastic resonance phenomenon has been studied experimentally and theoretically for a state-of-art metal-oxide memristive device based on yttria-stabilized zirconium dioxide and tantalum pentoxide, which exhibits bipolar filamentary resistive switching of anionic type. The effect of white Gaussian noise superimposed on the sub-threshold sinusoidal driving signal is analyzed through the time series statistics of the resistive switching parameters, the spectral response to a periodic perturbation and the signal-to-noise ratio at the output of the nonlinear system. The stabilized resistive switching and the increased memristance response are revealed in the observed regularities…
Empirical model for stress ratio effect on fatigue delamination growth rate in composite laminates
2004
An empirical model is proposed for the stress ratio effect on the fatigue delamination growth rate in composite laminates under single-mode loading, intending to provide a simple and accurate description tool in engineering application. The model is based on heuristic considerations of damage accumulation ahead of the crack. Linear cumulative assumption is used for damage estimation. Comparison of the prediction based on the proposed model with the test results for different carbon, glass, and alumina fibre-reinforced composites at several stress ratios shows reasonable agreement.
Numerical modeling and validation of hydrothermal liquefaction of a lignin particle for biocrude production
2021
Abstract Lignin liquefaction process under catalyst-free conditions in a temperature range from 573 K to 647 K is investigated with this mathematical model. Based on the theoretical understanding of the physical and chemical processes of the liquefaction process in subcritical temperatures, a comprehensive mathematical model for the decomposition of lignin by hydrolysis reaction pathway is developed on the results of a series of batch experiments. The model consists of four main sections. They are liquefaction of lignin particle, oily film, and inorganic (ash) layer formation behavior during the liquefaction, kinetic model to model further liquefaction process of initial products, and the l…