Search results for " polymers"
showing 10 items of 465 documents
Thermal frontal polymerization with a thermally released redox catalyst
2012
ABSTRACT: We studied thermal frontal polymerization using a re-dox systeminan attempt to lower the temperature of thefrontallypolymerizable system while increasing the front velocity so as toobtain a self-sustaining front in a thinner layer than without theredox components. A cobalt-containing polymer with a meltingpoint of 63 C (Intelimer 6050X11) and cumene hydroperoxidewere used with a triacrylate. The use of the Intelimer decreasedthe front velocity but allowed fronts to propagate in thinner layersand with more filler while still having a pot life of days. Nonplanarmodes of propagation occurred. Fronts propagated faster when6-O-palmitoyl- L -ascorbic acid was used as a reductant. Intere…
Role of photoactive layer morphology in high fill factor all-polymer bulk heterojunction solar cells
2011
We report on the realization of all-polymer solar cells based on blends of poly(3-hexylthiophene-2,5-diyl) (P3HT) as a donor and poly{[N,N'-bis(2-octyldodecyl)-naphthalene-1,4,5,8-bis(dicarboximide)-2,6-diyl]-alt-5,5'-(2,2'-bithiophene)} (P(NDI2OD-T2)) as an acceptor. High fill factors are demonstrated for the first time in this class of devices suggesting high dissociation efficiency for the bounded electron-hole pairs and balanced electron and hole mobility along the thin films. The use of the high-mobility n-type P(NDI2OD-T2) polymer enables us to overcome one of the problems limiting the efficiency of all-polymer solar cells, resulting in fill factors comparable with those reported for …
Polymetallic oxalate-based 2D magnets: Soluble molecular precursors for the nanostructuration of magnetic oxides
2010
Here we describe the synthesis and magnetic characterization of a family of 2D polymetallic oxalate-bridged polymeric networks with general formula [M(II)(H(2)O)(2)](3)[M(III)(ox)(3)](2)(18-crown-6)(2) (M(III) = Cr, Fe; M(II) = Mn, Fe, Co, Ni; 18-crown-6 = C(12)H(24)O(6)). Depending on the nature of the trivalent metal ion, they exhibit ferro- (Cr(3+)) or ferrimagnetic (Fe(3+)) ordering in the 3.6-20 K interval. In contrast with most of the oxalate-bridged CPs reported so far, these complexes do not need any additional templating cation for their assembly and represent the first series of oxalate-based polymeric networks which can be considered intrinsically neutral. As previously observed …
Tuning the pH-Switch of Supramolecular Polymer Carriers for siRNA to Physiologically Relevant pH
2017
The preparation of histidine enriched dendritic peptide amphiphiles and their self-assembly into multicomponent pH-switchable supramolecular polymers is reported. Alternating histidine and phenylalanine peptide synthons allow the assembly/disassembly to be adjusted in a physiologically relevant range of pH 5.3-6.0. Coassembly of monomers equipped with dendritic tetraethylene glycol chains with monomers bearing peripheral primary amine groups leads to nanorods with a tunable cationic surface charge density. These surface functional supramolecular polycations are able to reversibly bind short interfering RNA (siRNA). The nanorod-like supramolecular polymers, their complexation with siRNA, and…
Inverted molecular cups: 1-D and 2-D Ag(I) coordination polymers from resorcinarene bis-thiacrowns
2016
Resorcinarene bis-thiacrown hosts 1–3 were prepared and crystallized with silver trifluoroacetate yielding one and two dimensional Ag coordination polymers. The complexation of silver in exo-cavity fashion folds the thiacrown bridges inwards transforming the resorcinarene hosts into inverted molecular cups. The silver cations were coordinated to the resorcinarene ligands and trifluoroacetate anions, which act as monodentate or bidendate bridging ligands between the metal ions. Argentophilic Ag⋯Ag (2.93–3.38 A) interactions supported by two bridging carboxylate anions were found in two of the structures, whereas longer Ag⋯Ag distances were observed if only one anion connected the silver cati…
Construction of Coordination Polymers from Semirigid Ditopic 2,2′-Biimidazole Derivatives: Synthesis, Crystal Structures, and Characterization
2017
Eight coordination polymers (CPs), {[Ag(L1)]ClO4}n (1), {[Ag(L2)1.5]ClO4·C2H3N}n (2a), {[Ag(L2)]ClO4}n (2b), [Zn(L1)Cl2]n (3), {[Zn(L2)Cl2]·CHCl3}n (4), {[Cu(L1)2Cl]Cl·H2O}n (5), [Cu2(L2)(μ-Cl)2]n (6), and [Cu4(L2)(μ-Cl)4]n (7) were synthesized via self-assembly of corresponding metal ions and biimidazole based ditopic ligands, 1,1′-bis(pyridin-3-ylmethyl)-2,2′-biimidazole L1 and 1,1′-bis(pyridin-4-ylmethyl)-2,2′-biimidazole L2. These ligands possess conformational flexibility and two pairs of coordination sites: pyridine nitrogen (NPy) atoms and imidazole nitrogen (NIm) atoms. Depending on the metal center in CPs, the biimidazole compounds act as tetra- (1, 7), tri- (2a), or bidentate (2a,…
Caractérisation et prédiction du rendement de projection lors du procédé de projection à froid – cas de la métallisation des polymères
2020
This thesis work deals with the cold spray metallization of polymer substrates by aiming at an optimal deposition efficiency using experimental analysis combined with numerical simulation. Experimental observations of the powder jet using an ombroscopic analysis have revealed a generic behavior consisting of a uniform confined zone at the immediate exit of the nozzle followed by a dispersed zone. The supersonic flow at the nozzle exit being essentially axial, the powders are entrained to form a uniform jet. Beyond a certain distance, a dispersion appears. This distance is very important because it characterizes the behavior of the powders. It can alter the conditions for the elaboration of …
Wide-range cooling characteristics of a selected isotactic polypropylene
1997
Abstract An increased knowledge of polymer crystallization kinetics and its effect on the crystalline structure is of particular importance at high cooling rates. The aims of this study were to explore the range of utility and complementarity of various methods (densitometry, microscopy, wide-angle x-ray diffraction [WAXD], and small-angle light scattering [SALS]) on the characterization of the crystalline structure of a high purity isotactic polypropylene (PP) in a wider cooling range than previously obtainable and to identify characteristic ranges of the structure as a function of cooling rate. High cooling rates, ranging to nearly 1000°C/sec, were obtained using a special quench device. …
An experimental methodology to study polymer crystallization under processing conditions. The influence of high cooling rates
2002
Abstract A new experimental route for investigating polymer crystallization under very high cooling rates (up to 2000°C/s) is described. A complete and exhaustive description of the apparatus employed for preparing thin quenched samples (100– 200 μm thick) is reported, the cooling mechanism and the temperature distribution across sample thickness is also analysed, showing that the final structure is determined only by the thermal history imposed by the fast quench apparatus. Details concerning the characterization techniques used to probe the final structure are reported, including density measurements and wide angle X-ray diffraction patterns. Experimental results concerning isotactic poly…
The continuous cooling transformation (CCT) as a flexible tool to investigate polymer crystallization under processing conditions
2009
An experimental route for investigating polymer crystallization over a wide range of cooling rates (from 0.01 to 1000◦C/s) and pressures (from 0.1 to 40 MPa) is illustrated, using a method that recalls the approach adopted in metallurgy for studying structure development in metals. Two types of experimental setup were used, namely an apparatus for fast cooling of thin films (100–200 μm thick) at various cooling rates under atmospheric pressure and a device (based on a on-purpose modified injection molding machine) for quenching massive samples (about 1–2 cm3) under hydrostatic pressure fields. In both cases, ex situ characterization experiments were carried out to probe the resulting struct…