Search results for " purification"
showing 10 items of 244 documents
Editorial: Sustainable wastewater treatment and resource recovery
2020
Water
A semi-industrial scale AnMBR for municipal wastewater treatment at ambient temperature: performance of the biological process
2022
A semi-industrial scale AnMBR plant was operated for more than 600 days to evaluate the long-term operation of this technology at ambient temperature (ranging from 10 to 27 ºC), variable hydraulic retention times (HRT) (from 25 to 41 h) and influent loads (mostly between 15 and 45 kg COD·d−1). The plant was fed with sulfate-rich high-loaded municipal wastewater from the pre-treatment of a full-scale WWTP. The results showed promising AnMBR performance as the core technology for wastewater treatment, obtaining an average 87.2 ± 6.1 % COD removal during long-term operation, with 40 % of the data over 90%. Five periods were considered to evaluate the effect of HRT, influent characteristics, CO…
Design and performance of BNR activated sludge systems with flat sheet membranes for solid-liquid separation
2007
The use of immersed membranes for solid-liquid separation in biological nutrient removal activated sludge (BNRAS) systems was investigated at lab scale. Two laboratory-scale BNR activated sludge systems were run in parallel, one a MBR system and the other a conventional system with secondary settling tanks. Both systems were in 3 reactor anaerobic, anoxic, aerobic UCT configurations. The systems were set up to have, as far as possible, identical design parameters such as reactor mass fractions, recycles and sludge age. Differences were the influent flow and total reactor volumes, and the higher reactor concentrations in the MBR system. The performances of the two systems were extensively mo…
Sewage sludge management for phosphorus recovery as struvite in EBPR wastewater treatment plants
2008
The influence of separate and mixed thickening of primary and secondary sludge on struvite recovery was studied. Phosphorus precipitation in the digester was reduced from 13.7 g of phosphorus per kg of treated sludge in the separate thickening experiment to 5.9 in the mixed thickening experiment. This lessening of the uncontrolled precipitation means a reduction of the operational problems and enhances the phosphorus availability for its later crystallization. High phosphorus precipitation and recovery efficiencies were achieved in both crystallization experiments. However, mixed thickening configuration showed a lower percentage of phosphorus precipitated as struvite due to the presence of…
Struvite formation from the supernatants of an anaerobic digestion pilot plant
2009
This work studied the influence of the characteristics of the supernatants on the struvite precipitation process. Eighteen experiments with the supernatants generated in an anaerobic digestion pilot plant were performed in a stirred reactor. In order to obtain the pH control during the crystallization process, a Fuzzy Logic based controller was used. High phosphorus precipitation and recovery efficiencies were obtained. The composition of the supernatants was analyzed in order to study its influence on the solids formed from those solutions. The presence of calcium reduced the percentage of phosphorus precipitated as struvite leading to the formation of amorphous calcium phosphate (ACP), wh…
Optimisation of sludge line management to enhance phosphorus recovery in WWTP
2008
The management of the sludge treatment line can be optimized to reduce uncontrolled phosphorus precipitation in the anaerobic digester and to enhance phosphorus recovery in WWTP. In this paper, four operational strategies, which are based on the handling of the prefermented primary sludge and the secondary sludge from an EBPR process, have been tested in a pilot plant. The separated or mixed sludge thickening, the use of a stirred contact tank and the elutriation of the thickened sludge are the main strategies studied. Both the reduction of phosphorus precipitation in the digester and the supernatant suitability for a struvite crystallization process were assessed in each configuration. The…
Anaerobic on-site treatment of black water and dairy parlour wastewater in UASB-septic tanks at low temperatures.
2004
Anaerobic on-site treatment of synthetic black water (BW) and dairy parlour wastewater (DPWW) was studied in two-phased upflow anaerobic sludge blanket (UASB)-septic tanks at low temperatures (10-20 degrees C). At all temperatures, total chemical oxygen demand (COD(t)) removal was above 90% with BW and above 80% with DPWW and removal of total suspended solids (TSS) above 90% with both wastewaters. Moreover, dissolved COD (COD(dis)) removal was approx. 70% with both wastewaters indicating good biological activity of the sludges. With BW, a single-phased reactor was found sufficient for good COD removals, while with DPWW, a two-phased process was required. Temperature optimum of reactor sludg…
Simulated solar UV-irradiation of endocrine disrupting chemical octylphenol.
2009
The photolysis of octylphenol (OP) was investigated using a solar simulator in the absence/presence of dissolved natural organic matter (DNOM), HCO(3)(-), NO(3)(-) and Fe(III) ions. The effects of different parameters such as initial pH, initial concentration of substrate, temperature, and the effect of hydrogen peroxide concentration on photodegradation of octylphenol in aqueous solution have been assessed. The results indicate that the oxidation rate increases in the presence of H(2)O(2), nitrate and DNOM. Phenol, 1,4-dihydroxylbenzene and 1,4-benzoquinone were identified as intermediate products of photodegradation of octylphenol, through an HPLC method. In addition, the disappearance of…
Global sensitivity and uncertainty analysis of a microalgae model for wastewater treatment.
2022
The results of a global sensitivity and uncertainty analysis of a microalgae model applied to a Membrane Photobioreactor (MPBR) pilot plant were assessed. The main goals of this study were: (I) to identify the sensitivity factors of the model through the Morris screening method, i.e. the most influential factors; (II) to calibrate the influential factors online or offline; and (III) to assess the model's uncertainty. Four experimental periods were evaluated, which encompassed a wide range of environmental and operational conditions. Eleven influential factors (e.g. maximum specific growth rate, light intensity and maximum temperature) were identified in the model from a set of 34 kinetic pa…
Swimming pool water--fractionation and genotoxicological characterization of organic constituents.
2005
Swimming pool water treatment in general includes flocculation, sand filtration, and subsequent disinfection with chlorine. The continuous chlorination and input of organic material by bathers in combination with recirculation of the pool water leads to an accumulation of disinfection by-products (DBPs) in the water. Several DBPs have been identified as human carcinogens and are thought to cause allergic asthma. Therefore, the elimination of DBPs is one major aim of pool water treatment. Using membrane filtration as an alternative treatment technology, DBPs can be removed more efficiently than with conventional treatment. In this study membrane filtration and genotoxicity testing were appli…