Search results for " resin"
showing 10 items of 268 documents
Potent Aroma Compounds of Two Red Wine Vinegars
2000
Gas chromatography olfactometry (GCO) was used to determine key aroma compounds of two red wine vinegars. Sensory analysis was performed to choose the best neutralization agent of acetic acid (NaOH or MgO) and to test representativeness of four extracts obtained by different methods (dichloromethane extraction, XAD-2, mixture of XAD-2 and XAD-7, and Extrelut resins extraction). Neutralization with NaOH followed by dichloromethane extraction was selected to extract volatile compounds of vinegars. Key odorant compounds were determined by GCO based on detection frequency with 13 people. In the two red wine vinegars, 13 odors were perceived by at least 70% of the panelists, and 8 compounds amon…
Azoxybenzene rearrangement catalyzed by solid acids
2008
Abstract For the first time, the potential of acidic cation-exchange resin (sulfonated polystyrene) to catalyze the Wallach rearrangement of azoxybenzene into 4-hydroxyazobenzene has been proved. This finding reveals an alternative reaction path possible in a heterogeneous process using solid acids and may help to clear some doubts concerning the rearrangement mechanism postulated so far. The resin-induced reaction was found to proceed exclusively in a non-polar medium. Reasonable yield was obtained particularly in isooctane due to favorable distribution of azoxybenzene throughout the resin's matrix. On the contrary, the HY type zeolite did not activate the rearrangement, most probably beca…
Control of CaCO3 Crystallization by Demixing of Monolayers
2006
In this paper we describe how to template a demixed monolayer into a spatially patterned inorganic replica. For this purpose a new amphiphilic monomer was synthesized which can be polymerized both in solution and in the monolayer of a Langmuir-Blodgett (LB) trough. Since it inhibits the crystallization of CaCO3, it can be used--in combination with stearic acid (nucleation-promotor)--to control CaCO3 crystals formed under the monolayer. Investigations of the two-component monolayer (Langmuir isotherms and AFM measurements of transferred films) show--in the biphasic region--demixing in solid analogue stearic acid domains and the liquid analogue phase of the monomer. Crystallization of CaCO3 s…
Use of linear discriminant analysis applied to vibrational spectroscopy data to characterize commercial varnishes employed for art purposes.
2007
An improvement of methodologies for characterising synthetic resins used in varnishes employed for art purposes has been suggested. Several kinds of standard of the most common polymeric resins (acrylic, vinyl, poly(vinyl alcohol), alkyd, cellulose nitrate, latex, polyester, polyurethane, epoxy, organosilicic, and ketonic) were analyzed by Fourier transform infrared (FTIR) spectroscopy. Synthetic resins characterization is based on the mathematical treatment of their whole spectrum, dividing it in 13 sections, avoiding the one-by-one interpretation of the absorption bands. The mathematical model takes as variables the maximal absorbance of each section, and each synthetic standard resin as …
Characterization of acrylic resins used for restoration of artworks by pyrolysis-silylation-gas chromatography/mass spectrometry with hexamethyldisil…
2006
A procedure based on the technique of the pyrolysis-GC/MS has been applied, in this work, in order to determine the composition of synthetic acrylic resins employed in artworks. The method is based on the on line derivatization of these resins using hexamethyldisilazane (HMDS). Results obtained have been compared with those others from direct pyrolysis and in situ thermally assisted hydrolysis and methylation with tetramethylammonium hydroxide (TMAH). Sensitivity using HMDS as derivatising reagent is found similar to that from direct pyrolysis and methylation with TMAH. Better resolution of the most representative peaks has been also obtained. Additionally, this method reduces the formation…
Novel method for functionalising and patterning textile composites:Liquid resin print
2016
Abstract The paper reports a novel method of integrating resin into continuous textile reinforcement. The method presents a print of liquid reactive resin into textile preforms. A series of targeted injections forms a patch which upon consolidation and curing transforms into a stiff region continuously spanning through preform thickness. Enhancing the injected resin with conductive phase allows creating a pattern of patches with controlled dimensions and added functionalities. Patterned composites reveal features which are not typical for conventional composites such as fibre bridged interfaces, regular thickness variation, and gradient matrix properties. The presented study explores the ro…
Pannello precompresso di vetromattoni assemblati a secco per la realizzazione di involucri traslucidi
2012
L’invenzione riguarda la realizzazione di un pannello di vetromattoni montati “a secco” -da impiegare per la realizzazione di involucri edilizi traslucidi anche nel caso di edifici alti- che è in grado di rispondere adeguatamente alle sollecitazioni orizzontali (quali quelle dovute a vento e sisma) grazie all’applicazione della tecnica della precompressione mondirezionale. Per offrire una risposta ai limiti imposti dalla tecnica di assemblaggio tradizionale dei vetromattoni (“ad umido”), l’applicazione della precompressione consente, infatti, di dare ai pannelli preassemblati “a secco” una rigidezza adeguata anche in direzione normale al loro piano di posa, sfruttando le buone caratteristic…
Precursor Polymers for the Carbon Coating of Au@ZnO Multipods for Application as Active Material in Lithium-Ion Batteries
2014
The synthesis of statistical and block copolymers based on polyacrylonitrile, as a source for carbonaceous materials, and thiol-containing repeating units as inorganic nanoparticle anchoring groups is reported. These polymers are used to coat Au@ZnO multipod heteroparticles with polymer brushes. IR spectroscopy and transmission electron microscopy prove the successful binding of the polymer onto the inorganic nanostructures. Thermogravimetric analysis is applied to compare the binding ability of the block and statistical copolymers. Subsequently, the polymer coating is transformed into a carbonaceous (partially graphitic) coating by pyrolysis. The obtained carbon coating is characterized by…
Thermal Stability and Flame Retardancy of Polypropylene Composites Containing Siloxane-Silsesquioxane Resins
2018
A novel group of silsesquioxane derivatives, which are siloxane-silsesquioxane resins (S4SQ), was for the first time examined as possible flame retardants in polypropylene (PP) materials. Thermal stability of the PP/S4SQ composites compared to the S4SQ resins and neat PP was estimated using thermogravimetric (TG) analysis under nitrogen and in air atmosphere. The effects of the non-functionalized and n-alkyl-functionalized siloxane-silsesquioxane resins on thermostability and flame retardancy of PP materials were also evaluated by thermogravimetry-Fourier transform infrared spectrometry (TG-FTIR) and by cone calorimeter tests. The results revealed that the functionalized S4SQ resins may for…
Cariostatic effect of a light-cured, resin-reinforced glass-ionomer for bonding orthodontic brackets in vivo
1998
The aim of this study was to evaluate in vivo the cariostatic potential of the resin-reinforced glass-ionomer (Vitremer core build-up restorative; 3M Dental Product Division) when used as a bonding agent for orthodontic brackets. The mineral distribution and topography of the enamel surface adjacent to the bracket base was determined by quantitative microradiography (TMR) and confocal laser scanning microscopy (CLSM). The study was designed in split-mouth technique using 9 pairs of premolars to be extracted for orthodontic reasons. One tooth of each pair was bonded with the resin-reinforced glass-ionomer, and the control contralateral premolar with the non-fluoridated composite (Concise, 3M…