Search results for " silicon"
showing 10 items of 247 documents
Gold coated porous silicon nanocomposite as a substrate for photoluminescence-based immunosensor suitable for the determination of Aflatoxin B1.
2017
Abstract A rapid and low cost photoluminescence (PL) immunosensor for the determination of low concentrations of Aflatoxin B1 (AFB1) has been developed. This immunosensor was based on porous silicon (PSi) covered by thin gold layer (Au) and modified by antibodies against AFB1 (anti-AFB1). PSi layer was formed on silicon substrate, then the surface of PSi was covered by 30 nm layer of gold (PSi/Au) using electrochemical and chemical deposition methods and in such ways PSi/Au (El.) and PSi/Au (Chem.) structures were formed, respectively. In order to find PSi/Au the most efficiently suitable for PL-based sensor design, structure several different PSi/Au (El.) and PSi/Au (Chem.) structures were…
Porous silicon based photoluminescence immunosensor for rapid and highly-sensitive detection of Ochratoxin A.
2017
A rapid and low cost photoluminescence (PL) immunosensor for the determination of low concentrations of Ochratoxin A (OTA) has been developed. This immunosensor was based on porous silicon (PSi) and modified by antibodies against OTA (anti-OTA). PSi layer was fabricated by metal-assisted chemical etching (MACE) procedure. Main structural parameters (pore size, layer thickness, morphology and nanograins size) and composition of PSi were investigated by means of X-Ray diffraction (XRD), scanning electron microscopy (SEM) and Raman spectroscopy. PL-spectroscopy of PSi was performed at room temperature and showed a wide emission band centered at 680 ± 20nm. Protein A was covalently immobilized …
Optical retarder system with programmable spectral retardance.
2014
An optical system that works as a retarder waveplate with programmable spectral retardance is proposed. The system is based on a pixelated liquid crystal on silicon (LCoS) spatial light modulator (SLM). The input light beam is spectrally dispersed and different spectral components are projected onto different pixels of the LCoS-SLM. A different retardance is then addressed for each pixel, adapted to the incoming wavelength. Light reflected from the SLM is then recombined by the same setup. In this way a programmable polarization spectrum can be encoded. We illustrate the broadband characterization that is required for proper use of the system. Then several examples are shown, including spec…
Analysis of Transition Metal Oxides based Heterojunction Solar Cells with S-shaped J-V curves
2020
The use of transition metal oxides for the selective carrier contact in the crystalline silicon solar cells technology is rising to interest for the excellent optoelectrical properties of these materials whose implementation, however, can result in lousy performing cells due to an S-shaped electrical characteristic. In this paper, we fabricated solar cells showing S-shaped J-V curve and carried out an analysis of the reasons of such behavior using a model involving the series of a standard cell equivalent circuit with a Schottky junction in order to explain these atypical performances. A good matching between the experimental measurements and the adopted theoretical model was obtained. The …
Quantum phase slips in superconducting Nb nanowire networks deposited on self-assembled Si templates
2012
Robust porous silicon substrates were employed for generating interconnected networks of superconducting ultrathin Nb nanowires. Scanning electron microscopy analysis was performed to investigate the morphology of the samples, which constitute of polycrystalline single wires with grain size of about 10 nm. The samples exhibit nonzero resistance over a broad temperature range below the critical temperature, fingerprint of phase slippage processes. The transport data are satisfactory reproduced by models describing both thermal and quantum fluctuations of the superconducting order parameter in thin homogeneous superconducting wires.
The Use of Silicones as Extractants of Biologically Active Substances from Vegetable Raw Materials
2021
Based on theoretical studies, the authors of this paper propose the use of cosmetic organosilicon polymers (commonly called silicones) for the extraction of a complex of biologically active substances contained in vegetable raw materials. It is important to note that the biological molecules do not interact with the organosilicones and, therefore, their properties are not altered after the extraction. In this work, we investigate the efficiency of several polyorganosiloxanes as extractants of vegetable raw materials (Calendula Officialis L. and Artemisia Absinthium L.) useful for the preparation of cosmetic emulsions. Specifically, the extraction studies were conducted by using polyorganosi…
On the Variability of the Temperature Coefficients of mc-Si Solar Cells with Irradiance
2016
Abstract The temperature sensitivity of silicon solar cells is in general assumed to be constant with irradiance in PV forecasting models, although it has been demonstrated experimentally that this is not true. In this study a theoretical model is established that describes the variation of the temperature coefficients of a silicon solar cell as a function of the irradiance. It is shown that the temperature sensitivity of the solar cell efficiency is decreasing with the irradiance and that the main reason for this behavior comes from the increase of the open-circuit voltage with light intensity. Moreover, a dependency of the cell's ideality factor on the irradiance has to be assumed to rece…
Fabrication and Characterization of Polymeric Optical Waveguides Using Standard Silicon Processing Technology
2005
We report the fabrication and characterization of a rib polymeric waveguide having a thick layer of oxidized porous silicon as an innovative solution for the lower cladding. The waveguide was fabricated using standard silicon substrates and Si-based technology. The multimodal guiding structure has a polymethylmetacrylate (PMMA) core and the innovative lower cladding was obtained by thermal oxidation of a porous silicon layer. The waveguide does not have the upper cladding. Propagation loss measurements were performed at 1.48 /spl mu/m using the cut-back method. We obtained propagation loss of about 1.7 dB/cm, confirming the possibility to use the porous silicon oxide as the lower cladding l…
Modeling and simulation of a High Pressure Roller Crusher for silicon carbide production
2011
Author's version of a chapter published in the book: 11th International Conference on Electrical Power Quality and Utilisation. Also available from the publisher at: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=6128963&tag=1 This paper describes the modeling and simulation of High Pressure Roller Crusher (HPRC) for the production of silicon cabide grains. The study is to make a model for simulation of a High Pressure Roller Crusher. A High Pressure Roller Crusher (HPRC) is an important part in the production of silicon carbide, where the grains are crushed into powder form and then sieved into specified sizes based on its usage. This paper will present a model based on Johanson's…
Superconducting properties of Nb thin films deposited on porous silicon templates
2008
Porous silicon, obtained by electrochemical etching, has been used as a substrate for the growth of nanoperforated Nb thin films. The films, deposited by UHV magnetron sputtering on the porous Si substrates, inherited their structure made of holes of 5 or 10 nm diameter and of 10 to 40 nm spacing, which provide an artificial pinning structure. The superconducting properties were investigated by transport measurements performed in the presence of magnetic field for different film thickness and substrates with different interpore spacing. Perpendicular upper critical fields measurements present peculiar features such as a change in the H_c2(T) curvature and oscillations in the field dependenc…