Search results for " speed"
showing 10 items of 641 documents
Spatiotemporal patterns in methane flux and gas transfer velocity at low wind speeds: Implications for upscaling studies on small lakes
2016
Lakes contribute significantly to the global natural emissions of methane (CH4) and carbon dioxide. However, to accurately incorporate them into the continental carbon balance more detailed surveys of lacustrine greenhouse gas emissions are needed, especially in respect to spatiotemporal variability and to how this affects the upscaling of results. We investigated CH4 flux from a small, wind-shielded lake during 10 field trips over a 14 month period. We show that floating chambers may be used to calibrate the relationship between gas transfer velocity (k) and wind speed at 10 m height (U10) to the local system, in order to obtain more accurate estimates of diffusive CH4 flux than by applyin…
Cross-correlation of whitened vibration signals for low-speed bearing diagnostics
2019
Abstract Rolling-element bearings are crucial components in all rotating machinery, and their failure will initially degrade the machine performance, and later cause complete shutdown. The period between an initial crack and complete failure is short due to crack propagation. Therefore, early fault detection is important to avoid unexpected machine shutdown and to aid in maintenance scheduling. Bearing condition monitoring has been applied for several decades to detect incipient faults at an early stage. However, low-speed conditions pose a challenge for bearing fault diagnosis due to low fault impact energy. To reliably detect bearing faults at an early stage, a new method termed Whitened …
Accelerated bearing life-Time test rig development for low speed data acquisition
2017
Condition monitoring plays an important role in rotating machinery to ensure reliability of the equipment, and to detect fault conditions at an early stage. Although health monitoring methodologies have been thoroughly developed for rotating machinery, low-speed conditions often pose a challenge due to the low signal-to-noise ratio. To this aim, sophisticated algorithms that reduce noise and highlight the bearing faults are necessary to accurately diagnose machines undergoing this condition. In the development phase, sensor data from a healthy and damaged bearing rotating at low-speed is required to verify the performance of such algorithms. A test rig for performing accelerated life-time t…
A review of diagnostics and prognostics of low-speed machinery towards wind turbine farm-level health management
2016
Abstract Large wind farms are gaining prominence due to increasing dependence on renewable energy. In order to operate these wind farms reliably and efficiently, advanced maintenance strategies such as condition based maintenance are necessary. However, wind turbines pose unique challenges in terms of irregular load patterns, intermittent operation and harsh weather conditions, which have deterring effects on life of rotating machinery. This paper reviews the state-of-the-art in the area of diagnostics and prognostics pertaining to two critical failure prone components of wind turbines, namely, low-speed bearings and planetary gearboxes. The survey evaluates those methods that are applicabl…
Influence of friction stir processing conditions on the manufacturing of Al-Mg-Zn-Cu alloy/boron carbide surface composite
2018
Abstract Surface metal matrix composites were synthesized via friction stir processing (FSP) on the surface of aluminium alloy 7075 (AA 7075) sheets by incorporating B4C particles (B4CP). The influence of tool rotational speeds, powder particle sizes, and change in tool travel direction between FSP passes on particle distribution and resulting properties were studied in detail. Change in tool travel direction, decreased tool rotation speed and fine B4C particles enhanced B4CP distribution and wear properties thereof. Wear resistance of composites were doubled on account of the B4CP distribution and resultant several strengthening mechanisms.
Direct Torque Control of a Small Wind Turbine with a Sliding-Mode Speed Controller
2016
In this paper. the method of direct torque control in the presence of a sliding-mode speed controller is proposed for a small wind turbine being used in water heating applications. This concept and control system design can be expanded to grid connected or off-grid applications. Direct torque control of electrical machines has shown several advantages including very fast dynamics torque control over field-oriented control. Moreover. the torque and flux controllers in the direct torque control algorithms are based on hvsteretic controllers which are nonlinear. In the presence of a sliding-mode speed control. a nonlinear control system can be constructed which is matched for AC/DC conversion …
In-process control strategies for friction stir welding of AZ31 sheets with non-uniform thickness
2017
Two different in-process control strategies were developed and compared with the aim to produce AZ31 magnesium alloy joints by friction stir welding on sheet blanks with a non-uniform thickness. To this purpose, sheets with dip or hump zones were welded by either changing the rotational speed or the tool plunging in order to keep constant the value of the vertical force occurring during the welding stage of the process. The influence of the main process parameters on the tool force, the micro- and macromechanical properties, and the joints microstructures in the dip and hump zones were analyzed. The results showed that using the rotational speed change-based approach, the hump zones are sub…
Sensorless Speed Control for Double-Sided Linear Induction Motor Applications
2019
In this work, a flux and speed observer for double-sided linear induction motor applications is presented and experimentally validated. More in detail, from a Double-Sided Linear Induction Motor (DLIM) prototype, the complete modelling and the determination of the related parameters are here reported. Furthermore, the equations for a d-flux and q-flux observer are conceived and several simulation tests are performed. From the good agreements between the trends over time of the speed estimated by the observer and the simulated one, it can be stated that the observer is well designed. Moreover, in order to experimentally validate the proposed observer, a test bench is set-up for the DLIM/obse…
Does telomere length predict decline in physical functioning in older twin sisters during an 11-year follow-up?
2016
Background: Leucocyte telomere length (LTL) is known to be associated with mortality, but its association with age-related decline in physical functioning and the development of disability is less clear. This study examined the associations between LTL and physical functioning, and investigated whether LTL predicts level of physical functioning over an 11- year follow-up. Methods: Older mono- (MZ) and dizygotic (DZ) twin sisters (n=386) participated in the study. Relative LTL was measured by qPCR at baseline. Physical functioning was measured by 6-min walking distance and level of physical activity (PA). Walking distance was measured at baseline and at 3-year follow-up. PA was assessed by q…
Short telomere length is associated with impaired cognitive performance in European ancestry cohorts
2017
AbstractThe association between telomere length (TL) dynamics on cognitive performance over the life-course is not well understood. This study meta-analyses observational and causal associations between TL and six cognitive traits, with stratifications on APOE genotype, in a Mendelian Randomization (MR) framework. Twelve European cohorts (N=17 052; mean age=59.2±8.8 years) provided results for associations between qPCR-measured TL (T/S-ratio scale) and general cognitive function, mini-mental state exam (MMSE), processing speed by digit symbol substitution test (DSST), visuospatial functioning, memory and executive functioning (STROOP). In addition, a genetic risk score (GRS) for TL includin…