Search results for " static"

showing 10 items of 62 documents

A DC and small signal AC model for organic thin film transistors including contact effects and non quasi static regime

2017

Abstract We present a compact model for the DC and small signal AC analysis of Organic Thin Film Transistors (OTFTs). The DC part of the model assumes that the electrical current injected in the OTFT is limited by the presence of a metal/organic semiconductor junction that, at source, acts as a reverse biased Schottky junction. By including this junction, modeled as a reverse biased gated diode at source, the DC model is able to reproduce the scaling of the electrical characteristics even for short channel devices. The small signal AC part of the model uses a transmission line approach in order to compute the impedances of the channel and parasitic regions of the device. The overlap capacit…

DC modelMaterials scienceContact effectsparasitic capacitanceSchottky barrierOrganic thin film transistors02 engineering and technologyHybrid-pi model01 natural sciencesSignalNon-quasi static small signal modelBiomaterialsOrganic thin film transistors; DC model; AC model; Contact effects; parasitic capacitance; Non-quasi static small signal modelParasitic capacitanceTransmission line0103 physical sciencesHardware_INTEGRATEDCIRCUITSMaterials ChemistryAC modelElectrical and Electronic EngineeringElectrical impedance010302 applied physicsbusiness.industryGeneral Chemistry021001 nanoscience & nanotechnologyCondensed Matter PhysicsElectronic Optical and Magnetic MaterialsOrganic semiconductorThin-film transistorOptoelectronics0210 nano-technologybusinessOrganic Electronics
researchProduct

Optimal Population Growth as an Endogenous Discounting Problem: The Ramsey Case

2018

International audience; This paper revisits the optimal population size problem in a continuous time Ramsey setting with costly child rearing and both intergenerational and intertemporal altruism. The social welfare functions considered range from the Millian to the Benthamite. When population growth is endogenized, the associated optimal control problem involves an endogenous effective discount rate depending on past and current population growth rates, which makes preferences intertemporally dependent. We tackle this problem by using an appropriate maximum principle. Then we study the stationary solutions (balanced growth paths) and show the existence of two admissible solutions except in…

DiscountingChild rearingComparative staticsPopulation size05 social sciences[SHS.ECO]Humanities and Social Sciences/Economics and FinanceOptimal controlPopulation ethicsMaximum principle0502 economics and businessEconomicsPopulation growth050207 economicsMathematical economics050205 econometrics
researchProduct

Generation of even harmonics of sub-THz radiation in bulk GaAs in the presence of a static electric field

2007

The static electric field effects on nonlinear carrier dynamics in low-doped GaAs bulk under the influence of an intense sub-terahertz field are studied by a three-dimensional multivalleys Monte Carlo simulation. The conversion efficiency is calculated by using the appropriate Maxwell equation for the propagation of an electromagnetic wave along a given direction in the medium. Production of odd and even harmonics due to the nonlinearity of the velocity-field relation is investigated.

Electromagnetic fieldPhysicsElectromagnetic wave equationField (physics)Linear polarizationbusiness.industryNear and far fieldOptical fieldAtomic and Molecular Physics and OpticsElectronic Optical and Magnetic MaterialsComputational physicsOpticsModeling and SimulationHarmonicsElectric fieldHarmonic emission Static field effect Subterahertz radiationElectrical and Electronic EngineeringbusinessJournal of Computational Electronics
researchProduct

Vibration control for adjacent structures using local state information

2014

In this paper, a novel strategy for structural vibration control of multi-structure systems is presented. This strategy pays particular attention to mitigating negative interstructure interactions. Moreover, it is based on recent advances in static output–feedback control, which make possible the efficient computation of decentralized velocity-feedback controllers by solving a single-step optimization problem with Linear Matrix Inequality constraints. To illustrate the main ideas, a local velocity-feedback energy-to-peak controller is designed for the seismic protection of a two-building system. This controller is remarkably effective and extremely simple. Moreover, it can also be implement…

EngineeringOptimization problem:Informàtica::Automàtica i control [Àrees temàtiques de la UPC]Static output-feedbackComputationControl (management)Vibration controlEdificis -- Vibració:Enginyeria civil::Materials i estructures [Àrees temàtiques de la UPC]Feedback control systemsDamperStructural vibration controlControl d'estructures (Enginyeria)Control theorySimple (abstract algebra)Buildings -- VibrationElectrical and Electronic EngineeringMulti-structure systemsbusiness.industryMechanical EngineeringLinear matrix inequalityPassive damping designComputer Science Applications1707 Computer Vision and Pattern RecognitionControl engineeringComputer Science ApplicationsMulti-structure systems; Passive damping design; Static output-feedback; Structural vibration control; Mechanical Engineering; Electrical and Electronic Engineering; Computer Science Applications1707 Computer Vision and Pattern RecognitionControl and Systems EngineeringSistemes de control per retroaccióBuildings--VibrationStructural control (Engineering)business
researchProduct

The metrological characterization of the static meters for reactive energy in the presence of harmonic distortion

2007

For the electricity metering for billing purposes in distribution systems, the static meters are substituting the traditional inductive meters. Thus, the evaluation of the performances of such equipments is required, also in the presence of disturbances affecting the power systems. With respect to this, this paper analyzes the main aspects related to the metrological characterization of the static meters for reactive energy in the presence of harmonic distortion. Particular attention is given to the reference standard meters, that are not considered by the actual in-force Standards. The analysis is supported by several experimental tests.

EngineeringTotal harmonic distortionReactive energybusiness.industryComputingMethodologies_MISCELLANEOUSElectrical engineeringCharacterization (materials science)MetrologyDistribution systemElectric power systemHardware_GENERALMetering modeElectricitybusinessMetrological characterization static meters reactive energy harmonic distortion electricity metering distribution systems inductive meters power system measurementSettore ING-INF/07 - Misure Elettriche E Elettroniche2007 IEEE Instrumentation & Measurement Technology Conference IMTC 2007
researchProduct

Static meters for the reactive energy in the presence of harmonics: an experimental metrological characterization

2009

Electricity metering plays a crucial role for all the commercial transactions on the energy market. Thus, an accurate evaluation of the performance of the electricity metering equipment is required not only in the reference operating conditions but also in the presence of disturbances affecting the power systems. As regards this matter, this paper analyzes the main aspects related to the metrological characterization of the static meters for the reactive energy in the presence of harmonic distortion. Attention is focused not only to the meters covered by the current standards but also to the meters of better accuracy and to the reference standard meters. The analysis is supported by several…

EngineeringTotal harmonic distortionbusiness.industryComputingMethodologies_MISCELLANEOUSElectrical engineeringenergy measurements reactive power static meters reference standard meters power systems harmonicsAC powerAutomotive engineeringElectric power systemHardware_GENERALHarmonicsEnergy marketMetering modeElectricityElectrical and Electronic EngineeringbusinessInstrumentationSettore ING-INF/07 - Misure Elettriche E ElettronicheVoltage
researchProduct

Influence Of Lateral Load Distributions On Pushover Analysis Effectiveness

2008

The effectiveness of two simple load distributions for pushover analysis recently proposed by the authors is investigated through a comparative study, involving static and dynamic analyses of seismic response of eccentrically braced frames. It is shown that in the upper floors only multimodal pushover procedures provide results close to the dynamic profile, while the proposed load patterns are always conservative in the lower floors. They over-estimate the seismic response less than the uniform distribution, representing a reliable alternative to the uniform or more sophisticated adaptive procedures proposed by seismic codes. © 2008 American Institute of Physics.

EngineeringUniform distribution (continuous)business.industryStructural engineeringseismic codeSystem monitoringIncremental Dynamic Analysisnon liner static analysipushover curvePhysics and Astronomy (all)Settore ICAR/09 - Tecnica Delle Costruzioniload distributionStructural loadSimple (abstract algebra)load distributions; non liner static analysis; pushover curve; seismic codes; Physics and Astronomy (all)Geotechnical engineeringbusinessAIP Conference Proceedings
researchProduct

Optimal Flight Path Determination in Turbulent Air: A Modified EKF Approach

2017

By using the Extended Kalman Filter an accurate path following in turbulent air is performed. The procedure employs simultaneously two different EKFs: the first one estimates disturbances, the second one affords to determine the necessary controls displacements for rejecting those ones. To tune the EKFs an optimization algorithm has been designed to automatically determine Process Noise Covariance and Measurement Noise Covariance matrices. The first filter, by using instrumental measurements gathered in turbulent air, estimates wind components. The second one obtains command laws able to follow the desired flight path. To perform this task aerodynamic coefficients have been modified. Such a…

Filter (large eddy simulation)NoiseExtended Kalman filterControl theoryComputer scienceLongitudinal static stabilityPharmacology (medical)AerodynamicsCovarianceStability (probability)Stability derivativesAerotecnica Missili & Spazio
researchProduct

Test con palmare e correzione EGNOS

2010

Nel lavoro si riporta la sintesi di una sperimentazione attuata realizzando una serie di test con palmari e considerando l’affidabilità della correzione egnos (prove riuscite, tempi d’inizializzazione, configurazioni satellitari, relazioni tra parametri statistici e tempi di fissaggio) e la precisione nelle tre componenti plano-altimetriche. l’accuratezza conseguita è compatibile con le modalità di rilievo di massima di opere di ingegneria civile e per cantieri stradali, o per operazioni di pre-inquadramento catastale.

GPS EGNOS rilievo statico precisione affidabilitàSettore ICAR/06 - Topografia E Cartografia
researchProduct

Static Test with GPS, Glonass and EGNOS Receivers

2012

In this work the author show the results of testing conducted in last few years within the network of University of Palermo called UNIPA NRTK GNSS. The University of Palermo, in order to carry out scientific tests on the use of CORS networks for real time positioning, have realized a network of reference stations. The network was set up during a National Research Scientific Project entitled: "Networks of permanent GPS stations for survey in real time control and use of emergency" and was the first made in Sicily for scientific GNSS-NRTK research but is also used for topographic and cartographic applications. The goal of the work is to verify the reliability of the network infrastructure (su…

GPS Glonass EGNOS StaticGPS Glonass network UNIPA StaticSettore ICAR/06 - Topografia E Cartografia
researchProduct