Search results for "010401 analytical chemistry"
showing 10 items of 1284 documents
3D printed fluidic platform with in-situ covalently immobilized polymer monolithic column for automatic solid-phase extraction
2020
Abstract In this work, 3D stereolithographic printing is proposed for the first time for the fabrication of fluidic devices aimed at in-situ covalent immobilization of polymer monolithic columns. Integration in advanced flow injection systems capitalized upon programmable flow was realized for fully automatic solid-phase extraction (SPE) and clean-up procedures as a ‘front-end’ to on-line liquid chromatography. The as-fabricated 3D-printed extraction column devices were designed to tolerate the pressure drop of forward-flow fluidic systems when handling large sample volumes as demonstrated by the determination of anti-microbial agents, plastic additives and monomers as models of emerging co…
Preparation of monolithic polymer-magnetite nanoparticle composites into poly(ethylene-co-tetrafluoroethylene) tubes for uses in micro-bore HPLC sepa…
2021
[EN] This paper describes the fabrication of a novel microbore monolithic column modified with magnetite nanoparticles (MNPs) prepared in a poly(ethylene-co-tetrafluoroethylene) (EFTE) tubing, and its application as stationary phase for the chromatographic separation of phosphorylated compounds. In order to obtain the composite column, a two-step procedure was performed. The formation of a glycidyl methacrylate-based monolith inside the activated ETFE tube was firstly carried out. Then, two incorporation approaches of MNPs in monoliths were investigated. The generic polymer was modified with 3-aminopropyltrimethoxysilane (APTMS) to be subsequently attached to MNP surfaces. Alternatively, AP…
Photografted fluoropolymers as novel chromatographic supports for polymeric monolithic stationary phases
2018
[EN] In this study, porous polymer monoliths were in situ synthesized in fluoropolymers tubing to prepare microbore HPLC columns. To ensure the formation of robust homogeneous polymer monoliths in these housing supports, the inner surface of fluoropolymer tubing was modified in a two-step photografting process. Raman spectroscopy and scanning electron microscopy (SEM) confirmed the successful modification of the inner poly(ethylene-co-tetrafluoroethylene) (ETFE) wall and the subsequent attachment of a monolith onto the wall. Poly(glycidyl methacrylate-co-divinylbenzene), poly(butyl methacrylate-co-ethyleneglycol dimethacrylate) and poly(styrene-co-divinylbenzene) monoliths were in situ synt…
Hydrocarbon chemotypes of some blackcurrant cultivars (Ribes sp)
1989
The hydrocarbon fractions of the essential oils of 11 cultivars of blackcurrant (Ribes spp) buds originating from collections in France and Australia have been submitted to GC/MS analysis. The major monoterpene and sesquiterpene hydrocarbons define chemotypes which have been conventionally described by a letter-based formula. Whereas four monoterpene chemotypes previously reported are confirmed, eight sesquiterpene chemotypes have to be redefined. They involve: δ-elemene, β-caryophyllene, γ-elemene, α-humuiene, alloaromadrene, germacrene D, γ-cadinene, and two unknowns. The different cultivars examined and their corresponding chemotypic formulae have been discriminated by principal componen…
Post-Mortem Investigations for the Diagnosis of Sepsis: A Review of Literature
2020
To date, sepsis is still one of the most important causes of death due to the difficulties concerning the achievement of a correct diagnosis. As well as in a clinical context, also in a medico-legal setting the diagnosis of sepsis can reveal challenging due to the unspecificity of the signs detected during autopsies, especially when no ante-mortem clinical data, laboratory, and cultural results are available. Thus, a systematic review of literature was performed to provide an overview of the main available and updated forensic tools for the post-mortem diagnosis of sepsis. Moreover, the aim of this review was to evaluate whether a marker or a combination of markers exist, specific enough to…
Compositional and morphological analyses of wax in northern wild berry species.
2019
Accepted manuscript version, licensed CC BY-NC-ND 4.0. Aerial surfaces of plants are covered by a waxy cuticle protecting plants from excessive water loss and UV light. In the present study, composition and morphology of cuticular waxes of northern wild berry species bilberry (Vaccinium myrtillus L.), lingonberry (V. vitis-idaea L.), bog bilberry (V. uliginosum L.) and crowberry (Empetrum nigrum L.) were investigated. Scanning electron microscopy (SEM) revealed differences in epicuticular wax morphology, and gas chromatography–mass spectrometry (GC–MS) analysis confirmed variation in chemical composition of cuticular waxes between the berry species. The dominant compounds in bilberry and li…
Effects of texture and temperature on the kinetic of aroma release from model dairy custards
2010
http://www.sciencedirect.com/science/article/B6T6R-4YYRMXD-2/2/9ac9167b05d21ef9ff6dcce684696e13 http://www.elsevier.com/locate/foodchem; International audience; The structure of a foodstuff, and its perceived texture, are important characteristics involved in the sensory availability of flavour compounds released during the food consumption. This study identifies the effect of texture on the dynamic release of aroma compounds under simulated oral conditions (temperature and shearing). Two custard desserts, with two levels of texture but the same composition, flavoured with four aroma compounds, were analysed. The rheological behaviour of the custards and the release of aroma compounds (SPME…
A multi-disciplinary investigation of the "Tavolette fuori posto" of the "Hall of Barons" wooden ceiling of the "Steri" (Palermo, Italy)
2016
Abstract Four painted slabs, called “Tavolette fuori posto” (Slabs out of place), of Galleria Interdisciplinare Regionale della Sicilia — Palazzo Abatellis (Palermo, Italy) were investigated with multi-techniques approach by using noninvasive and micro-destructive techniques. The slabs presumably belong to the decoration of the wooden ceiling of the “Hall of Barons” of the Palazzo Chiaramonte, said Steri, in Palermo (Italy). The aim of this study was to investigate the kind of materials used by the artist, the executive technique and the state of conservation. Pigments, binders and trace of previous restorations were identified. The results were used to properly plan the restoration interve…
Assessment of the statistical significance of classifications in infrared spectroscopy based diagnostic models.
2014
Fourier transform infrared (IR) spectroscopy in combination with multivariate data analysis is a versatile tool that can be applied to disease diagnosis. However, a rigorous validation of the obtained models is necessary in order to obtain robust results. This work evaluates the advantages of the use of permutation testing for determining the statistical significance of the misclassification errors obtained from IR based diagnostic models through cross validation (CV). The model performance, estimated by CV, is compared to a distribution of CV-performance values obtained using randomly permuted class labels. The distribution of ‘random CV-values’ is considered as a null distribution and use…
A multivariate approach to the study of orichalcum ingots from the underwater Gela's archaeological site
2017
Abstract In this work a careful ICP-OES and ICP-MS investigation of 38 ancient ingots has been performed to determine both major components and trace elements content to find a correlation between the observed different features and the composition. The ingots, recovered in an underwater archaeological site of various finds near Gela (CL, Italy), were previously investigated by X-Ray Fluorescence (XRF) spectroscopy to know the composition of the alloy and it was found that the major elements were copper and zinc, in a ratio compatible with the famous orichalcum similar to the contemporary brass that was considered a precious metal in ancient times. The discovery of huge amount this alloy is…