Search results for "0204 chemical engineering"
showing 10 items of 273 documents
Performance study of a Helical Savonius hydrokinetic turbine with a new deflector system design
2019
Abstract The use of renewable energy sources has becoming a necessity to generate electricity. Helical Savonius rotors have been preferred for small-scale hydropower generation. Numerous studies were carried out to improve the performance of the Helical Savonius rotor which has not been fully explored. In this paper, an experimental study was carried out to evaluate the performance of a Helical Savonius water rotor in an irrigation channel. In order to enhance the performance of the studied water rotor, a new deflector system design was proposed. Different configurations of the proposed deflector system were tested numerically using the commercial software ANSYS FLUENT 17.0. Without a defle…
Experimental study of the pyrolysis of waste bitumen for oil production
2020
Abstract This work focuses on bitumen slow pyrolysis. Mass and energy yields of oil, solid and gas were obtained from pyrolysis experiments using a semi-batch reactor in a nitrogen atmosphere, under three non-isothermal conditions (maximum temperature: 450 °C, 500 °C and 550 °C). The effect of temperature on the product yields was discussed. The gas compositions were analysed using gas chromatography (GC) and the heating value of oil and solid residue was also measured. Using a thermo-gravimetric analyser, kinetic parameters were evaluated through Ozawa-Flynn-Wall (OFW) method. Results showed that oil yield is maximum at 500 °C (50%). Moreover, gas yield increased with increasing pyrolysis …
Prediction models to analyse the performance of a commercial-scale membrane distillation unit for desalting brines from RO plants
2018
Abstract Desalting brines from Reverse Osmosis (RO) plants is one of the most promising applications of Membrane Distillation (MD) systems. The development of accurate models to predict MD system performances plays a significant role in the design of this kind of industrial applications. In this paper, a commercial-scale Permeate-Gap Membrane Distillation (PGMD) module was modelled by means of two different approaches: Response Surface Methodology (RSM) and Artificial Neural Networks (ANN). Condenser inlet temperature, evaporator inlet temperature, feed flow rate and feed water salt concentration were selected as inputs of the model, while permeate flux and Specific Thermal Energy Consumpti…
Impact of graphitic carbon nitride nanosheets in mixed- matrix membranes for removal of heavy metals from water
2021
International audience; Removal of heavy metal ions from water is being a challenge and Polysulfone (PSf) membranes have shown great potential to remove them from contaminated solutions. In this work, the introduction of Graphitic carbon nitride nanosheets (g-C3N4) into PSf membranes was implemented to improve the permeability and separation performance of PSf membranes. g-C3N4 was incorporated into the membrane matrix via nonsolvent induced phase inversion method. The prepared mixed matrix membranes showed enhanced performances towards water filtration. The incorporation of g-C3N4 into the membrane matrix caused an increase in the desired physicochemical properties like hydrophilicity and …
Preliminary evaluation of biopolymers production by mixed microbial culture from citrus wastewater in a MBR system using respirometric techniques
2021
Abstract This preliminary study was aimed at evaluating the feasibility to produce biopolymers (BP) from citrus wastewater by mixed microbial culture in an anaerobic/aerobic membrane bioreactor (A/O-MBR). The activated sludge of the A/O-MBR was successfully enriched in microorganisms having a good capacity in producing intracellular biopolymers. The production of BP was found to be about 0.55 mgCOD mgCOD−1 using pure acetate at a concentration of 1000 mgCOD L−1. When using fermented wastewater, the conversion of acetate into BP product was 0.56 mgCOD mgCOD−1 in the test performed with C/N equal to 1000:1, whereas it was only 0.12 mgCOD mgCOD−1 in the test with C/N of 100:5. The results achi…
Estimation of the mean crystal size and the moments of the crystal size distribution in batch crystallization processes
2016
International audience; A cascade high gain observer is designed to estimate the first four leading moments of the crystal size distribution (CSD) and the mean crystal size in batch crystallization processes. The proposed observer is based on a well-known transformation of the partial differential equation describing the CSD to a set of ordinary differential equations (the method of moments). Due to numerical difficulties resulting from the important differences in the magnitudes of the moments, a set of new variables is computed to allow a good estimation of the moments and thus the mean crystal size. In this work, only solute concentration and crystallizer temperature are used to estimate…
Influence of annealing conditions on the photoelectrocatalytic performance of WO3 nanostructures
2020
[EN] Nanostructured WO3 photoanodes have been synthesized by electrochemical anodization under controlled hydrodynamic conditions in acidic media in the presence of 0.05 M H2O2. Subsequently, samples have been subjected to a thermal treatment (annealing) at different temperatures (400 degrees C, 500 degrees C and 600 degrees C) and under different gaseous atmospheres (air, N-2, Ar). The influence of these annealing conditions on the morphology, crystallinity, photoelectrochemical behavior and dopant chemistry of the different photoanodes has been investigated through Electronic Microscopy, Raman Spectroscopy, Photoelectrochemical Impedance Spectroscopy and Mott-Schottky analysis. In general…
Economic analysis of the scale-up and implantation of a hollow fibre membrane contactor plant for nitrogen recovery in a full-scale wastewater treatm…
2021
[EN] Nitrogen recovery technologies such as the hollow fibre membrane contactor are now being developed. However, an economic analysis is needed prior to their full-scale application in wastewater treatment plants. The aim of this study was to analyse the economic and environmental aspects of scaling-up this method. To achieve it, a full-scale 40,000 m3·day¿1-wastewater treatment plant influent flow rate was simulated jointly with a membrane contactor plant to evaluate the minimum costs of optimum operating conditions of membrane contactors (pH, feed flow rate and membrane surface). The optimum conditions for treating 600 m3·day¿1 of reject water was found to be 10 pH, 0.08 m3·s¿1 feed flow…
Performance improvement of a novel combined water turbine
2020
Abstract Nowadays, industrials and researchers are looking for renewable energy resources due to the increase of energy demand. Recently, the ability of combined turbines in harnessing energy from water current has increased their renewed interest. However, there still exist a big knowledge gap to select the optimal design of these turbines. In this paper, systematic studies of stand-alone helical Savonius and delta bladed Darrieus turbines were carried out using experimental methods as a precursor to analyze their roles in hybrid configuration. By varying the attachment angle, two hybrid configurations were tested experimentally. Using the optimal attachment angle, six hybrid configuration…
Regression analysis to design a solar thermal collector for occasional use
2020
Abstract Optimal design of a solar thermal system is necessary to minimize payback time and to diffuse renewable energy use for Domestic Hot Water production in residential areas. More accurate design is crucial in the case of seasonal or occasional use of the system; indeed, the standard criteria generally applied to a design system for continuous use, can lead to considerable over-sizing. To speed up the design phase and to help the planner in the identification of the best solution without any complex evaluation or long computational time, it would be interesting to have available a simpler method than the standard procedures, but one that is reliable and accurate for the evaluation of t…