Search results for "1-Propanol"
showing 7 items of 37 documents
Azeotropic distillation for 1-propanol dehydration with diisopropyl ether as entrainer: Equilibrium data and process simulation
2019
Abstract Azeotropic distillation process is widely used to separate non-ideal binary mixtures into their constituent pure components. 1-Propanol dehydration was used as case study and diisopropyl ether was analysed as possible entrainer in an azeotropic distillation. The separation of some alcohols from their aqueous solution is a challenging task because these aqueous mixture forms minimum boiling azeotrope. In this way, isobaric vapor-liquid and vapour-liquid-liquid equilibrium data were measured for the 1-propanol+ water + diisopropyl ether ternary mixture at 101.3 kPa. The data were correlated by NRTL and UNIQUAC models. A separation sequence (a decanter and a single-feed distillation c…
Capability study of 1-butyl-3- methylimidazolium bis(trifluoromethylsulfonyl)imide and trihexyl(tetradecyl)phosphonium bis(2,4,4-trimethylpentyl)phos…
2018
Abstract The liquid-liquid equilibria of the ternary systems water (1) + 1-propanol (2) + 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([bmim][Tf2N]) (3) and water (1) + 1-propanol (2) + trihexyl(tetradecyl)phosphonium bis(2,4,4-trimethylpentyl)phosphinate ([TDTHP][Phosph]) (3) at 283.2, 303.2 and 323.2 K and atmospheric pressure were determined to study their behaviour, determine their thermodynamic parameters and know the capability as solvents of [bmim][Tf2N] and [TDTHP][Phosph] in the separation of the azeotropic mixture water + 1-propanol. The non-random two-liquid (NRTL) and universal quasichemical (UNIQUAC) models were used in the calculation of the thermodynamic par…
Liquid–Liquid Equilibria of the Water + 1-Propanol + 1-Butyl-1-methylpyrrolidinium Bis(trifluoromethylsulfonyl)imide Ternary System: Study of the Abi…
2016
An important problem in the chemical industry is the separation of azeotropes. Their separation by simple distillation is basically impossible, and extractive distillation consumes much more energy than liquid–liquid extraction, so this alternative could be interesting. Recently, researchers have started to explore these option using ionic liquids as the solvent. The remarkable properties of ionic liquids have made them sustainable alternatives to conventional solvents. This work is a continuation of a study developed by our research group on the use of ionic liquids as extractant solvents of alcohol + water mixtures which form azeotropes, using in this case 1-butyl-1-methylpyrrolidinium bi…
Isobaric vapor-liquid equilibria for extractive distillation of 1-propanol + water mixture using thiocyanate-based ionic liquids
2017
Abstract This paper presents vapor-liquid equilibrium (VLE) data at 101.3 kPa for the ternary systems 1-propanol + water + 1-ethyl-3-methylimidazolium thiocyanate [emim][SCN] and 1-propanol + water + 1-butyl-3-methylimidazolium thiocyanate [bmim][SCN] and their constituents binary systems. The experimental data obtained were correlated using the NRTL, eNRTL and UNIQUAC models. It was found that the addition of these ionic liquids enhance the relative volatility of 1-propanol to water, and the separation ability follows the order of [emim][SCN] > [bmim][SCN]. The results obtained were compared with the VLE data of the system containing this azeotropic mixtures with different imidazolium-base…
CEC column behaviour of butyl and lauryl methacrylate monoliths prepared in non-aqueous media
2009
Polymeric monolithic stationary phases for capillary electrochromatography were prepared using two bulk monomers, butyl methacrylate (BMA) and lauryl methacrylate (LMA), by in situ polymerization in non-aqueous media. The effect of 1,4-butanediol/1-propanol ratio on porous properties was investigated separately for each monomer, keeping the proportion of monomers to pore-forming solvents fixed at 40:60 wt:wt. Also, mixtures of BMA and LMA at different 1,4-butanediol/1-propanol ratios were studied for tailoring the morphological features of the monolithic columns. The chromatographic performance of the different columns was evaluated by means of van Deemter plots of polycyclic aromatic hydro…
Vaporization characteristics of 1-propanol droplets at high temperatures
2011
International audience; The gasification of a droplet via vaporization is one of the main processes in combustion systems, namely diesel and propulsion engines. In these combustion systems, always the liquid fuel is atomized as a cloud of droplets in the chamber, which then vaporizes, and mixes with the oxidant and burns to release heat. Therefore, to afford a better knowledge especially in modelling complex spray flows and mixture formation issues, the study of the droplet vaporization which involves mass, heat and momentum transfer processes is really vital. Alcohol has been chosen for this particular study due to its potential as an alternative fuel to the current conventional hydrocarbo…
Characterization of hydroxyaromatic compounds in vegetable oils by capillary electrophoresis with direct injection in an oil-miscible KOH/propanol/me…
2005
The separation of hydroxyaromatic compounds in vegetable oils, including synthetic antioxidants (3-tert-butyl-4-hydroxyanisol and 2,6-di-tert-butyl-4-hydroxytoluene), E-vitamers and other natural oil components, by nonaqueous capillary electrophoresis in an oil-miscible background electrolyte (BGE) was investigated. The BGE contained 40 mM KOH in a methanol/1-propanol (PrOH) mixture (15:85 v/v). The oil samples were 1:1 diluted with PrOH and directly injected in the capillary. Under negative polarity (cathode at the injection end), the anionic solutes moved faster than the electroosmotic flow, being well-resolved among them and from the triacylglycerols. Using virgin palm, extra virgin oliv…