Search results for "2500"
showing 10 items of 24 documents
The Transverse Crack Tension test revisited
2016
Several problems arise when measuring the mode II interlaminar fracture toughness using a Transverse Crack Tension specimen; in particular, the fracture toughness depends on the geometry of the specimen and cannot be considered a material parameter. A preliminary experimental campaign was conducted on TCTs of different sizes but no fracture toughness was measured because the TCTs failed in an unacceptable way, invalidating the tests. A comprehensive numerical and experimental investigation is conducted to identify the main causes of this behaviour and a modification of the geometry of the specimen is proposed. It is believed that the obtained results represent a significant contribution in …
Behavior of alloying elements during anodizing of Mg-Cu and Mg-W alloys in a fluoride/glycerol electrolyte
2015
Anodizing of sputtering-deposited magnesium and Mg-0.75at.%Cu and Mg-1.23at.%W alloys has been carried out in a fluoride/ glycerol electrolyte. The aims of the study were to investigate the enrichment of alloying elements in the alloy immediately beneath the anodic film and the migration of alloying element species in the film. The specimens were examined by electron microscopy and ion beam analysis. An enrichment of copper is revealed in the Mg-Cu alloy that increases with the anodizing time up to ∼6×1015 Cu atoms cm-2. Copper species are then incorporated into the anodic film and migrate outwards. In contrast, no enrichment of tungsten occurs in the Mg-W alloy, and tungsten species are im…
Infrared Thermography assisted evaluation of static and fatigue Mode II fracture toughness in FRP composites
2019
Abstract The work proposes the combined use of a Modified Transverse Crack Tension (MTCT) test coupon and Infrared Thermography, to evaluate the static and fatigue behaviour of Fibre Reinforced Polymer composites under Mode II delamination. Artificial delaminations starters are added to the TCT coupon, whose effects on the Strain Energy Release Rate are discussed. Infrared Thermography and Thermoelastic Stress Analysis are implemented to investigate stresses and delaminations growths on two FRP materials: a pre-preg IM7/8552 carbon fibre-epoxy and a glass-fibre reinforced epoxy laminates. The thermographic, thermoelastic and second harmonic signals have been obtained and used to monitor the…
Thermoelastic Stress Analysis of modified Transverse Cut Tensile composite specimens under pure Mode II fatigue delamination
2018
The present work investigates the behaviour of a Transvers Crack Tensile (TCT) specimen undergoing fatigue loading, by means of a Thermoelastic Stress Analysis (TSA) experimental setup. The TCT is a tensile composite specimen where a number of internal layers are cut through the beam width. The presence of such transverse notch favours the formation of interlaminar Mode II delaminations, starting from the notch tips and propagating between the cut and continuous plies. In this work, a modification is adopted to the classic TCT specimen, where insert films, mimicking artificial delaminations, are laid across the notch tips. This is done with the purpose to favour a pure Mode II and a symmetr…
Structural performances of pultruded GFRP emergency structures – Part 1: Experimental characterization of materials and substructure
2019
Abstract This paper presents an experimental study in the field of structures made of pultruded fiber reinforced polymers (FRP) elements to be used for emergency purposes. A preliminary design of a 3D pultruded glass fiber reinforced polymer structure is presented with the mechanical characterization of the constituting elements. The axial and flexural properties of laminate and I-shaped GRFP profiles are discussed considering the short term creep. In a companion paper, the benefits, the limits and the reliability of the structure analyzed for emergency applications are discussed. In details, the numerical structural analysis of the full-scale 3D model is described followed by the experimen…
A methodology for the rapid characterization of Mode II delamination fatigue threshold in FRP composites
2019
Abstract A new methodology to measure the Mode II interlaminar fracture in fatigue for FRP composites is developed. The proposed methodology uses a Modified Transvers Crack Tensile (MTCT) specimen and is able to characterize the near threshold behavior in a robust, easier and significantly faster way than standard procedures. Analytical formulae, able to link the crack growth rate to the load or strain amplitudes, were found and verified, and their importance was explained, in particular, for what concerns the characterisation of the near threshold behavior. Experiments were performed both in load and strain control, while the delamination growth was monitored using different techniques inc…
Touching the upper limit for ferromagnetic interactions in hetero-bridged dinuclear [Cu-2(II)] complexes using a novel N-5-dinucleating ligand bearin…
2012
A novel N-5-dinucleating ligand 4-amino-3,5-bis(bipyridine-2-yl)-1,2,4-triazole allows the preparation for the first time, and under mild conditions, of single and mixed amido(R-NH-)-bridged copper(II) complexes, the latter exhibiting very strong ferromagnetic coupling.
Quantitative thermoelastic stress analysis by means of low-cost setups
2020
Abstract A low-cost Thermoelastic Stress Analysis (TSA) experimental setup is proposed which uses an ordinary micro-bolometer and in-house developed signal processing scripts. The setup is evaluated by analysing the thermoelastic signal from a tensile and a SENT specimen made of stainless steel AISI 304L, and the bolometer performances are compared with those of a state of the art photon detector. Signal processing is based on off-line cross-correlation, using a self-reference signal which is retrieved from the acquired thermal data. Procedures are in particular developed to recognise, quantify and correct errors due to spectral leakage and loss of streamed frames. The thermoelastic signal …
Consistent device simulation model describing perovskite solar cells in steady-state, transient, and frequency domain
2019
This document is the Accepted Manuscript version of a Published Work that appeared in final form in ACS Applied Materials & Interfaces, copyright © American Chemical Society after peer review and technical editing by the publisher. To access the final edited and published work see https://pubs.acs.org/doi/10.1021/acsami.9b04991
Efficient excitation of dielectric-loaded surface plasmon-polariton waveguide modes at telecommunication wavelengths
2008
International audience; The excitation of surface plasmon-polariton (SPP) waveguide modes in subwavelength dielectric ridges deposited on a thin gold film has been characterized and optimized at telecommunication wavelengths. The experimental data on the electromagnetic mode structure obtained using scanning near-field optical microscopy have been directly compared to full vectorial three-dimensional finite element method simulations. Two excitation geometries have been investigated where SPPs are excited outside or inside the dielectric tapered region adjoint to the waveguide. The dependence of the efficiency of the SPP guided mode excitation on the taper opening angle has been measured an…