Search results for "Activated carbon"
showing 10 items of 70 documents
Production of ethyl lactate by activated carbon-supported Sn and Zn oxide catalysts utilizing lignocellulosic side streams
2021
Abstract In this study, activated carbon-supported Sn and Zn oxide catalysts were prepared from hydrolysis lignin and used for the conversion of model solutions of trioses, hexoses, and lignocellulosic biomass hydrolysates to ethyl lactate. Both catalysts, SnO2@AC and ZnO@AC, were able to produce ethyl lactate in high yields. SnO2@AC was a more active and selective catalyst in triose (dihydroxyacetone) conversion, providing 99% yield to ethyl lactate. ZnO@AC, by contrast, was more selective in glucose and hydrolysate conversion, with a yield of 60% and 85%, respectively. The ethyl lactate yields were significantly higher than those from the optimized model solution experiments when using Zn…
Interference of EDTA in the treatment of metal plating wastewater by biosorption
2012
Adsorption of Heavy Metals from Aqueous Solutions onto Activated Carbon in Single Cu and Ni Systems and in Binary Cu-Ni, Cu-Cd and Cu-Zn Systems
1997
Single copper and nickel adsorption from aqueous solutions onto a granular activated carbon is reported. Metal removals increase on raising pH and temperature, and decrease on raising the initial metal concentration at constant carbon dose. The adsorption processes are modelled using the surface complex formation (SCF) Triple Layer Model (TLM) with an overall surface bidentate species. A dependence of the SCF constant on pH, initial molar metal/carbon ratio and temperature is observed, and a correlation for log Kads is determined. The SCF model successfully predicts copper and nickel removals in single metal solutions. Adsorption in the binary metal systems copper–nickel, copper–cadmium and…
Detection of lung cancer bio-markers in human breath using a micro-fabricated air analyzer
2015
International audience; The analysis of volatile organic compounds (VOCs) that are linked to lung cancer is a very promising way in medical diagnostics because it is non-invasive and potentially inexpensive. In that sense, a silicon micro-analytical platform consisting of a three-dimensional micro-preconcentrator coupled to a silicon spiral gas chromatographic micro-column was built. A metal oxide-based gas sensor acted as a miniaturized gas detector. This system allowed selective detection of VOCs at the sub-ppm level. The present study is focused first on the chromatographic air analyzer fabrication and second on the selection of an appropriate adsorbent. Various adsorbents such as activa…
Electronically conducting polymers and activated carbon: Electrode materials in supercapacitor technology
1996
Biomass-based composite catalysts for catalytic wet peroxide oxidation of bisphenol A : preparation and characterization studies
2019
Abstract The wet granulation process was used to prepare new, efficient, and cost-effective granular biomass-based composite catalysts for catalytic wet peroxide oxidation (CWPO) of bisphenol A (BPA). The most stable composite granules was prepared by mixing biomass-based carbon residue (CR) with metakaolin (MK) combined with calcium oxide (CaO) or cement and a solvent (NaOH or KOH). For all the prepared composite granules, the optimized binding agents to carbon ratio was 0.3, the solvent to carbon ratio 1.2, and the agitation rate 1200 rpm. The specific surface area of the prepared catalysts was 152–205 m2/g. The composite granular catalyst (CR + MK + CaO + NaOH) had the most durable and s…
Conversion of Xylose to Furfural over Lignin-Based Activated Carbon-Supported Iron Catalysts
2020
In this study, conversion of xylose to furfural was studied using lignin-based activated carbon-supported iron catalysts. First, three activated carbon supports were prepared from hydrolysis lignin with different activation methods. The supports were modified with different metal precursors and metal concentrations into five iron catalysts. The prepared catalysts were studied in furfural production from xylose using different reaction temperatures and times. The best results were achieved with a 4 wt% iron-containing catalyst, 5Fe-ACs, which produced a 57% furfural yield, 92% xylose conversion and 65% reaction selectivity at 170 °
Analysis of carbamate pesticides and their metabolites in water by solid phase extraction and liquid chromatography: A review
2001
Carbamates are an important, broad class of pesticides that are used extensively as insecticides, fungicides, and herbicides. Sensitive, economical, fast, and environmental friendly procedures are constantly developed to investigate their residues in water samples. The state of the art in methods based on solid phase extraction (SPE) and liquid chromatographic determination are examined here. SPE is presently the most extended method for preconcentration of carbamate pesticide residues and their transformation products from water samples. Advantages and limitations of alkyl bonded-silica, and polymeric sorbents, carbon, and mixed-phases in off-line and on-line procedures are discussed. Beca…
Determination of indoor air quality of a phytosanitary plant.
2011
A new methodology has been developed to determine volatile organic compounds (VOCs) and pesticides in ambient air using membrane based devices as passive samplers. Pesticides were determined by gas chromatography with mass spectrometry detection (GC-MS) after their microwave-assisted extraction (MAE) from the passive sampler and the required clean-up. On the other hand, VOCs were also caught with the same samplers and directly determined by head space (HS) coupled to GC-MS. The use of samplers filled with florisil and activated carbon allows us to catch with a simple device both, VOCs and pesticides, with a high vapor pressure. Results obtained in the deployment of samplers in different sit…
Coupling Adsorption and Biological Technologies for Multicomponent and Fluctuating Volatile Organic Compounds Emissions Abatement: Laboratory-Scale E…
2015
The capacity of activated carbon as a buffer pretreatment combined with biotrickling filtration for volatile organic compound (VOC) removal has been studied. The adsorption capacity of commercial activated carbons for m-xylene, acetone and n-butyl acetate (typical paint solvents) was evaluated, including the response to the interchanging of adsorbed compounds and to mixtures over fluctuating inlet conditions. The adsorption of m-xylene and n-butyl acetate was mainly irreversible and more than three times higher than for acetone. The prior use of activated carbon influenced adsorption and buffer capacities in consecutive adsorption/desorption cycles. The Dubinin–Radushkevich equation was use…