Search results for "Anhydride"

The mechanism of formation of 3H,9H-Pyrano[3,4-b]indol-3-ones from 3-indolalkanoic acids

1991

The mechanism of the formation of 1-methyl-3H,9H-pyrano[3,4-b]indol-3-one (4) from the corresponding 3-indolacetic acid 1 is discussed. The suggested mechanism is substantiated by the isolation of a stable intermediate 2 and its transformations in the presence of acetic anhydride and/or Lewis acids.

Macrocyclic peptides in anionic polymers of amino acid N-carboxylic anhydrides.

1976

Effect of extrusion and photoxidation on polyethylene/clay nanocomposites

2009

Polyethylene (a 1:1 blend of m-LLDPE and z-LLDPE) double layer silicate clay nanocomposites were prepared by melt extrusion using a twin screw extruder. Maleic anhydride grafted polyethylene (PEgMA) was used as a compatibiliser to enhance the dispersion of two organically modified monmorilonite clays (OMMT): Closite 15A (CL15) and nanofill SE 3000 (NF), and natural montmorillonite (NaMMT). The clay dispersion and morphology obtained in the extruded nanocomposite samples were fully characterised both after processing and during photo-oxidation by a number of complementary analytical techniques. The effects of the compatibiliser, the organoclay modifier (quartenary alkyl ammonium surfactant) …

Progress in Understanding of the Interactions between Functionalized Polyolefins and Organo-Layered Double Hydroxides

2013

The dispersion of organo-layered double hydroxides (O-LDH) in functionalized polyolefins (POs) is investigated. Two different polyethylene matrices (maleic anhydride (MAH) and diethyl maleate functionalized) are tested and a hydrogenated fatty acid modified LDH is used. The attention is focused on evidencing the interaction between the functional groups of the polymer and the O-LDH through FT-IR. Moreover, a combination of solvent fractionation, morphological, and rheological characterizations enables to gain a deeper insight into the structure of these composites. In particular, the formation of bridging bonds between the particles and MAH functionalized macromolecules is assumed, possibly…

Covalently attached polymer mono- and multilayers on silanized glass substrates

1996

Abstract Applying grazing incidence FTIR and ellipsometry, the reaction of poly [(1-methyl-vinyl isocyanate)-alt-(maleic anhydride)](IAP) with amino-silanized glass and silicon oxide surfaces has been investigated. A reactive surface containing isocyanate and anhydride groups was formed after the adsorption of the polymer. The layer could be further functionalized using 2-aminoethanol. Multilayers could be built up by adsorbing a second layer of IAP onto an already reacted first layer of IAP.

Compatibilization of blends of polyethylene with a semirigid liquid crystalline polymer by PE-g-LCP copolymers

1997

The blends of thermoplastics with liquid crystalline polymers show, in general, poor properties because of the lack of adherence between the two phases. The use of ad hoc synthesized copolymers containing the monomer units of the two polymers has been recently considered by some of us for blend compatibilization, and the results appear promising. In this work, new PE-g-LCP copolymers, prepared either by the synthesis of the LCP in the presence of a functionalized PE, or by reactive blending of the latter polymer with preformed LCP, have been employed as compatibilizing additives for blends of PE with a semirigid LCP. The morphology and the rheological and mechanical properties of the ternar…

Compatibilization of polyethylene/polyamide 6 blend nanocomposite films

2015

Polymer blends of incompatible components need to undergo compatibilization, in order to give rise to a blend with good physical properties. At the same way, polymer/clay nanocomposites show this problem because of different chemical nature of the polymer matrix and of the clay. Compatibilization is therefore more necessary if an incompatible polymer blend is filled with an organomodified clay in order to give a final material with good properties. In this work, a polyethylene/polyamide 6 blend filled with an organomodified clay has been compatibilized with a maleic anhydride grafted SEBS (styrene-ethylene-butylene-styrene) copolymer and a glicidylmethacrylate-ethylene copolymer. The result…

Mechanical relaxation in miscible polymer systems: the glass transition regime in poly(vinylmethylether) (PVME)-cross-polystyrene (PS) semi-interpene…

1990

Abstract Miscible semi-interpenetrating polymer networks (semi-IPN) of varying composition are prepared by crosslinking polystyrene containing few maleic anhydride groups with a diamine in the presence of linear poly(vinylmethylether) (PVME). The resulting PVME-c-P(ScoMA) semi-IPNs are characterized by their thermal and thermomechanical behaviour. Comparison with the corresponding uncrosslinked material proves that weak crosslinking has a negligible effect on the location of the glass transition as measured by d.s.c. Both the Tg data and the temperatures of the loss modulus maximum E″ (at 1 rad/s) show the same non-linear curved composition dependence. Contrary to this the tan δ maximum var…

On the compatibilization of PET/HDPE blends through a new class of copolyesters

2000

Polyethyleneterephthalate (PET) and polyethylene are incompatible polymers and their blends show, in general, poor properties. Compatibilization is then a necessary step to obtain blends with good mechanical and barrier properties. In this work different compatibilizing agents were used, i.e. a maleic anhydride elastomer and some new products containing graft-copolymers having polyester segments grafted onto polyethylene backbone chains. Both the functionalized elastomer and the new products drastically improve the morphology and the ductility of the blend. In the case of the modified elastomer the compatibilizing action has been attributed to the formation of H-bonds whereas the copolymers…

Modified photobehavior of carboxylic acid derivatives induced by protonation

1987

Abstract A series of carboxylic acid derivatives 1–6 containing a second interacting function have been converted into the corresponding O -protonated species or acylium ions upon treatment with 96% sulfuric acid or oleum, respectively, at room temperature. The resulting stable cations have been spectroscopically characterized and submitted to irradiation. Cis-trans photoisomerization was observed in the ionic speciesderived from trans -crotonic, fumaric and maleic acids, and maleic anhydride. By contrast protonated crotonolactone 5a+ was found to be photostable. Finally, protonated α-bromobutyrolactone 6a+ was clean and efficiently dehydrohalogenated to 5a+ upon irradiation. Since the norm…