Search results for "Annealing"
showing 10 items of 434 documents
Magnetic and structural study of (Fe1−Co )62 Nb8B30 bulk amorphous alloys
2004
Abstract The electric and magnetic properties of rapidly quenched (Fe 1− x Co x ) 62 Nb 8 B 30 bulk metallic glasses were studied with x =0, 0.33 and 0.50. The Curie temperature in the amorphous state was found to be about 245 °C for the Co-free alloy, 290 °C for x =0.33 and 201 °C for x =0.50, while the crystallization temperature is varying within 15° only around 600 °C. The change in T C correlates with the change in Mossbauer parameters. An interesting flattening effect of annealing on the hysteresis loop was observed which increases with the Co content. The resistivity could not be improved above 152 μΩ cm, which limits the high frequency applications of these alloys.
Cr- and Sb-containing TiO 2 inorganic orange nano-pigments prepared by a relative long hydrocarbon chain polyol
2016
Abstract We report the preparation of a series of orange Cr- and Sb-containing TiO 2 nano-pigments by the polyol via using triethylenglycol (TEG). Poorly crystallized anatase nanopowders with nominal stoichiometric compositions Cr x Sb x Ti 1−2x O 2 , with 0 ≤ x ≤ 0.2, were obtained by heating at 180 °C a solution of antimony acetate, chromium acetylacetone and titanium butoxide in TEG. The transition temperature of the chromium- and antimonium-containing anatase nanoparticles into the rutile crystalline form occurred over the range of temperature between 500 and 650 °C, depending on the dopant amount. After annealing at 800 °C for short time the series of samples displaying the rutile stru…
Preparation and photoactivity of electrophoretic TiO2coating film
2012
TiO2 thin films have been obtained by a sol-electrophoretic deposition method on metallic Ti and Pt substrates. X-ray diffraction, Raman spectroscopy and scanning electron microscopy were used to investigate the structure and morphology of plated materials. Annealed TiO2 films mainly are formed in anatase structure with different morphology depending on substrate material. Light induced potential measurements indicate that the morphology substantially have an impact on photoactivity of TiO2 thin films.
Homogeneous Langmuir-Blodgett Film of Double-Chain Ammonium Amphiphile Complexed with Anionic Polymer
1988
Heterogeneous textures suggesting the coexistence of a fluid and a solid phase were found both in a surface monolayer and in a deposited Langmuir-Blodgett (LB) film of double-chain ammonium amphiphiles by fluorescence microscopy. Although an annealing of the surface monolayer at 40°C allowed crystal growth, the heterogeneous phase separation remained in the LB film. A drastic change of the fluorescence image shows that the recrystallization of the complexed monolayer with anionic polymers conducted the homogeneous monolayer.
Annealing of radiation induced oxygen deficient point defects in amorphous silicon dioxide: evidence for a distribution of the reaction activation en…
2011
The selective annealing of point defects with different activation energies is studied, by performing sequences of thermal treatments on gamma irradiated silica samples in the temperature range 300-450 °C. Our experiments show that the dependence on time of the concentration of two irradiation induced point defects in silica, named ODC(II) (standing for oxygen deficient centre II) and the E(γ)(') centre, at a given temperature depends on the thermal history of the sample for both of the centres studied; moreover in the long time limit this concentration reaches an asymptotic value that depends on the treatment temperature alone. These results suggest the existence of a distribution of the a…
Transient and stable color centers in pure and Cu-doped LiNbO3
2003
The present work is devoted to investigation of stable and transient color centers that are induced by radiation and temperature in pure and Cu-doped LiNbO 3 single crystals. The transient changes of absorption of the crystals induced by pulsed electron beam (E=0.25 MeV) are studied in 0-5000 ns time range, as well as stable changes of absorption induced by reducing annealing and irradiation with γ-quanta, high energy electrons or fast reactor neutrons.
Watching adsorption and electron beam induced decomposition on the model system Mo(CO)(6)/Cu(111) by X-ray absorption and photoemission spectroscopies
2013
Abstract An in-depth study of the first steps of electron beam assisted growth of Mo from molybdenum hexacarbonyl on Cu(1 1 1) has been carried out exploiting the complementarity of X-ray photoemission and X-ray absorption spectroscopies. Frank van der Merwe (2D) growth mode has been observed for the completion of the two first monolayers of adsorbed molecules through a simple physisorption process. Irradiation of the Mo(CO)6 deposit by 1 keV electron beam induces a modification of molybdenum coordination, the average number of C-neighbors decreasing from 6 to 3. Decomposed molecules remain on the surface after annealing at 520 K and organize themselves, the molybdenum atoms moving in Cu(1 …
"Reactivity of Cu3Si of different genesis towards copper(I) chloride"
2000
Abstract A comparative study of the reactivity between copper(I) chloride and three types of Cu 3 Si obtained in a molten medium (Cu 3 Si-Ref) and from mechanical activation following an annealing process (Cu 3 Si-M2AP) or a self-propagating high-temperature synthesis (Cu 3 Si-MASHS) was performed by thermogravimetry under vacuum using non-isothermal and isothermal methods of kinetic measurement. It was established that for the three Cu 3 Si/CuCl systems, the acceleration and decay stages in the temperature range 145–215°C are very closely approximated by an equation of the Prout–Tompkins type where an autocatalytic process was proposed. The lower apparent activation energy obtained for the…
Should TiO2 nanostructures doped with Li+ be used as photoanodes for photoelectrochemical water splitting applications?
2017
[EN] Different TiO2 nanostructures, nanotubes and nanosponges, were obtained by anodization of Ti under stagnant and hydrodynamic conditions. Samples were doped with Li+ before and after annealing at 450 degrees C during 1 h. The nanostructures were characterized by different microscopy techniques: Field Emission Scanning Electron Microscopy (FE-SEM) and Raman Confocal Laser Microscopy. Additionally, Incident Photon-to-electron Conversion Efficiency (IPCE), photoelectrochemical water splitting and stability measurements were also performed. According to the results, TiO2 nanostructures doped before annealing present the worst photocurrent response, even if compared with undoped samples. On …
Lateral Fusion of Chemical Vapor Deposited N = 5 Armchair Graphene Nanoribbons
2017
Bottom-up synthesis of low-bandgap graphene nanoribbons with various widths is of great importance for their applications in electronic and optoelectronic devices. Here we demonstrate a synthesis of N = 5 armchair graphene nanoribbons (5-AGNRs) and their lateral fusion into wider AGNRs, by a chemical vapor deposition method. The efficient formation of 10- and 15- AGNRs is revealed by a combination of different spectroscopic methods, including Raman and UV−visnear-infrared spectroscopy as well as by scanning tunneling microscopy. The degree of fusion and thus the optical and electronic properties of the resulting GNRs can be controlled by the annealing temperature, providing GNR films with o…