Search results for "Anode"
showing 10 items of 317 documents
Recent advances in the development of high-resolution 3D cadmium-zinc-telluride drift strip detectors.
2020
In the last two decades, great efforts have been made in the development of 3D cadmium–zinc–telluride (CZT) detectors operating at room temperature for gamma-ray spectroscopic imaging. This work presents the spectroscopic performance of new high-resolution CZT drift strip detectors, recently developed at IMEM-CNR of Parma (Italy) in collaboration with due2lab (Italy). The detectors (19.4 mm × 19.4 mm × 6 mm) are organized into collecting anode strips (pitch of 1.6 mm) and drift strips (pitch of 0.4 mm) which are negatively biased to optimize electron charge collection. The cathode is divided into strips orthogonal to the anode strips with a pitch of 2 mm. Dedicated pulse processing analysis…
CEMS of insulators by use of gas-flow counters
1994
Gas-flow CEMS counters are usually designed in such a manner that the sample to be investigated is inserted into the counter and serves as the backing cathode. If the sample consists of an insulating material, serious problems are expected by charging-up effects similar to those appearing in Maze counters. These problems are discussed in detail. It could be shown by experiments with glass samples that their very low surface conductivity is sufficient to allow a defined operation of such gas-flow CEMS detectors. The electric field strength between the surface of the sample and the anode has to be equal or higher than that between the entrance window and the anode. This can be ensured by an a…
Design and construction of the fast photon detection system for COMPASS RICH-1
2010
International audience; New photon detectors, based on the use of multi-anode photo-multiplier tubes coupled to individual lens telescopes and read out with a dedicated read-out electronics system, equip the central region of the Cherenkov imaging counter RICH-1 of the COMPASS experiment at CERN SPS. They are characterised by high photon yield, fast response and high rate capability and are successfully in operation since the 2006 COMPASS data taking. The photon detection system fully matches the expected performance. The design and construction of the photon detectors are described in detail.
Particle identification with the fast COMPASS RICH-1 detector
2009
International audience; A new photon detection system for the COMPASS RICH-1 detector has been designed and installed. In the central region, the project is based on multi-anode photo-multiplier technology accompanied by charge sensitive, high resolution and dead-time free time digitization. In the outer area, only the readout electronics for the existing photon detectors has been replaced. Details on the detector upgrade and its performance are presented.
Development of new CdZnTe detectors for room-temperature high-flux radiation measurements
2017
Recently, CdZnTe (CZT) detectors have been widely proposed and developed for room-temperature X-ray spectroscopy even at high fluxes, and great efforts have been made on both the device and the crystal growth technologies. In this work, the performance of new travelling-heater-method (THM)-grown CZT detectors, recently developed at IMEM-CNR Parma, Italy, is presented. Thick planar detectors (3 mm thick) with gold electroless contacts were realised, with a planar cathode covering the detector surface (4.1 mm × 4.1 mm) and a central anode (2 mm × 2 mm) surrounded by a guard-ring electrode. The detectors, characterized by low leakage currents at room temperature (4.7 nA cm−2 at 1000 V cm−1), a…
Electrical properties of Au/CdZnTe/Au detectors grown by the boron oxide encapsulated Vertical Bridgman technique
2016
Abstract In this work we report on the results of electrical characterization of new CdZnTe detectors grown by the Boron oxide encapsulated Vertical Bridgman technique (B-VB), currently produced at IMEM-CNR (Parma, Italy). The detectors, with gold electroless contacts, have different thicknesses (1 and 2.5 mm) and the same electrode layout, characterized by a central anode surrounded by a guard-ring electrode. Investigations on the charge transport mechanisms and the electrical contact properties, through the modeling of the measured current–voltage ( I – V ) curves, were performed. Generally, the detectors are characterized by low leakage currents at high bias voltages even at room tempera…
High voltage conditioning of the electrostatic deflector of MARA
2016
Abstract MARA is a new recoil mass separator in the Accelerator Laboratory of University of Jyvaskyla (JYFL-ACCLAB) with a mass resolving power of 250 and an ion-optical configuration of QQQD E D M . In this paper the construction, control and conditioning of its electrostatic deflector are described. The deflector was designed for voltages up to 500 kV accross the gap, corresponding to a 3.6 MV/m field, to accomodate fusion reactions with inverse kinematics. Titanium electrodes with a beam dump opening in the anode are used. The conditioning procedure, which has been used repeatedly to take the deflector to 450 kV, is described, along with the safety systems and precautions that are in pla…
Tensiostatic studies on formation and breakdown of anodic oxide films on tungsten in acidic chloride solutions
1977
Abstract The anodic behaviour of tungsten in HCl and HCl + KCl solutions has been extensively studied. For each solution, the applied voltage was increased from 1 V up to the breakdown voltage. Values of the current and open circuit voltage decays were recorded. The HCl concentration was varied from 0.05 M to 12 M while appropriate addition to KCl was made to reach assigned molarities of the Cl − ion. The results are discussed and qualitatively interpreted in terms of the different influence of the H + and Cl − ions.
Effects of natural extracts in the treatment of oral ulcers: A systematic review of evidence from experimental studies in animals
2021
Background To evaluate the clinical and histopathological effects of natural extracts in the treatment of oral ulcers induced in animal experimental models. Material and methods We carried out a search in the Medline, Scopus, WoS and Embase databases from the start of the databases to December 2020, and also made a manual search of the references. The search and selection were carried out by two researchers independently. The inclusion criteria were: experimental studies in animal models, in english, which complied with the study object. Results A total of 705 articles were identified. After selection by title, abstract and full text, 19 articles were finally included. Natural extracts of J…
Efficiency enhancement of organic light emitting diodes by NaOH surface treatment of the ITO anode
2009
Abstract Organic light emitting diodes (OLEDs) based on tris-(8-idroxyquinoline)aluminum (Alq 3 ) with enhanced efficiency are reported here. This is obtained by improving the charge carrier balance, through a preliminary NaOH surface treatment of the indium tin oxide (ITO) anode, in order to decrease its work function and, consequently, reduce the hole injection. The obtained devices exhibit a 1.36% external quantum efficiency and a 1.2 lm/W power efficiency at a current density of 60 mA/cm 2 . These values are more than double as compared with those of identical reference devices fabricated without the preliminary NaOH surface treatment.