Search results for "Application"
showing 10 items of 5559 documents
Dynamic characterization for the dielectric electroactive polymer fundamental sheet
2012
Published version of an article published in the journal: International Journal of Advanced Manufacturing Technology. Also available from the publisher at: http://dx.doi.org/10.1007/s00170-012-4423-6 A study into the appropriateness of characterizing the dynamics of the dielectric electroactive polymer (DEAP) fundamental sheet has been performed. Whereby a model describing the dynamics of the DEAP fundamental sheet is developed, parameters of the models are determined using experimental/simulation results, and verification has been conducted to determine the precision of the dynamic model. The precision for the DEAP sheet-obtained dynamic model could not be verified unless some parameters c…
Data gathering and mathematical modelling for pitch stabilisation of a high speed catamaran
2011
This paper deals with the data gathering phase for a 21-foot long planing catamaran. The boat experiences a take-off phenomenon at high speed which needs to be countered. An overview of stability problems in high speed hydroplanes is described with possible solutions recommended. A subsequent gathering of data using laser scanning and computational fluid dynamics (CFD) analysis of the boat are described. The paper ends with a look at the initial developments of stabilising systems for the boat.
An expert system for vineyard management based upon ubiquitous network technologies
2011
Vineyard operations for quality wines production are currently based upon costly and time-consuming manual sampling operations required to assess the maturity phases of grapevines. The ripening process however is significantly influenced by the environmental parameters which nowadays can be effectively monitored by means of ubiquitous computing technologies. Besides the possibility of gathering data, hence, suitable tools are required to support the vineyard management process. The present research concerns the development of an expert system to effectively manage the vineyard operations. The methodology is based on the analysis of the time series of indices related to the maturation phases…
A Compensation Based Method to Model PV Nodes in Backward/Forward Distribution Network Analysis
2007
PurposeThis paper proposes to identify a new model of the fixed voltage nodes (PV nodes) for medium voltage distribution systems analysis. The model is used within backward/forward (b/f) analysis method applied to solve radial and weakly meshed systems.Design/methodology/approachThe model is based on the compensation currents method for multi‐port systems which has been extensively used, within b/f analysis methods, to take into account the presence of meshes and PV nodes.FindingsTest results prove the approach to be more efficient and precise than previous methodologies and put into evidence the good performance of the proposed model in terms of speed and convergence properties.Research li…
Allocation of actuators and sensors for coupled-adjacent-building vibration attenuation
2013
An actuator and sensor allocation approach is proposed for the design of coupled-adjacent-building vibration suppression under seismic excitation. This paper first establishes a full-order model of adjacent buildings with the location information of actuators and sensors. Then, the order of the model is reduced via modal cost analysis, by retaining the modes contributing the most. In view of the fact that the output powers of the actuators are limited, this paper brings forward a mixed H∞/GH2 control. By considering that not all the states of the system can be measured by the sensors, a dynamic output feedback controller is designed. The genetic algorithm is employed to obtain the locations…
Influence of the channel design on the heat and mass exchange of induction channel furnace
2011
PurposeThe purpose of this paper is to present in‐depth numerical modelling of heat and mass exchange in industrial induction channel furnace (ICF).Design/methodology/approachThe turbulent heat and mass exchange in the melt is calculated using a three‐dimensional (3D) electromagnetic model and a 3D transient large eddy simulation method. The simulation model has been verified by flow velocity and temperature measurements, which were carried out using an industrial sized channel inductor operating with Wood's metal as a low temperature model melt.FindingsThe ICF is well‐established for melting, holding and casting in the metallurgical industry. But there are still open questions regarding th…
Speed Control of a two-Degrees of Freedom Induction Motor with Rotor Helical Motion for Industrial Applications
2014
This paper describes the realization of a two-degrees of freedom induction motor prototype with rotor helical motion, suitable for several industrial applications as grinders, augers, drilling and milling spindles, robotic arms and drives for medical tools and prostheses. This prototype was realized by combining a three-phase tubular linear induction motor (TLIM) with the stator of a three-phase rotary induction motor, resulting in a THMIM (Tubular Helical Motion Induction Motor). Moreover, a possible simple electrical drive, capable to control the helical motion, is proposed, simulated and analyzed. In particular, the mathematical model of the THMIM has been initially developed and, then, …
Aspects of Improving the Cost-Performance Ratio for the Manufacturing of Small-Size Cast Parts
2010
Abstract The paper analyses some of the commercially available solutions for casting small-size metallic parts and outlines possible solutions that would reduce the cost of such systems while maintaining a high performance level. high performance level. One typical application area for small-size parts is human prosthetics, so the commercial casting machines analysed here are used mainly in this application domain. The paper shows how high-cost systems added to the machines for providing protective atmospheres can be replaced by low-cost solutions with the same results in terms of part quality. Moreover, a solution is described that avoids the typical drawbacks of the currently used casting…
An analytical model for improving precision in single point incremental forming
2007
Abstract In the modern manufacturing scenario and, in particular, in sheet metal forming, the requirement of customised production is still growing. The introduction of incremental forming enables the production of customised components in small lots. In particular, single point incremental forming is characterised by the simplest equipment; any die, in fact, is avoided reducing the necessary tooling to a simple frame, able to clamp the sheet, and a hemispherical punch that imposes the required deformation. This tooling simplicity and the associated process mechanics, in turn, determine a sometimes relevant lack of accuracy. The paper is focused on the investigation of the influence of the …
Vibration analysis for bearing fault detection and classification using an intelligent filter
2014
Abstract This paper proposes an intelligent method based on artificial neural networks (ANNs) to detect bearing defects of induction motors. In this method, the vibration signal passes through removing non-bearing fault component (RNFC) filter, designed by neural networks, in order to remove its non-bearing fault components, and then enters the second neural network that uses pattern recognition techniques for fault classification. Four different categories include; healthy, inner race defect, outer race defect, and double holes in outer race are investigated. Compared to the regular fault detection methods that use frequency-domain features, the proposed method is based on analyzing time-d…