Search results for "Applied Physic"
showing 10 items of 1228 documents
MoSi2 laser cladding—a comparison between two experimental procedures: Mo–Si online combination and direct use of MoSi2
2001
International audience; There are very strong interests in developing low density advanced material systems for service at temperatures up to 1300°C. These materials should mainly have moderate fracture toughness at low and intermediate temperatures and should exhibit oxidation resistant behaviour. The intermetallic compound, MoSi2 has been considered to be an attractive candidate due to its melting point (2030°C) and excellent oxidation resistance at high temperatures. In this paper, we compare the results obtained with two different techniques for laser cladding, one using an online combination between Mo and Si powders, the second using direct injection of the MoSi2 powder.
Longitudinal spin-relaxation in nitrogen-vacancy centers in electron irradiated diamond
2015
We present systematic measurements of longitudinal relaxation rates ($1/T_1$) of spin polarization in the ground state of the nitrogen-vacancy (NV$^-$) color center in synthetic diamond as a function of NV$^-$ concentration and magnetic field $B$. NV$^-$ centers were created by irradiating a Type 1b single-crystal diamond along the [100] axis with 200 keV electrons from a transmission electron microscope with varying doses to achieve spots of different NV$^-$ center concentrations. Values of ($1/T_1$) were measured for each spot as a function of $B$.
Microwave-free magnetometry with nitrogen-vacancy centers in diamond
2016
We use magnetic-field-dependent features in the photoluminescence of negatively charged nitrogen-vacancy centers to measure magnetic fields without the use of microwaves. In particular, we present a magnetometer based on the level anti-crossing in the triplet ground state at 102.4 mT with a demonstrated noise floor of 6 nT/$\sqrt{\text{Hz}}$, limited by the intensity noise of the laser and the performance of the background-field power supply. The technique presented here can be useful in applications where the sensor is placed closed to conductive materials, e.g. magnetic induction tomography or magnetic field mapping, and in remote-sensing applications since principally no electrical acces…
Optical quenching and recovery of photoconductivity in single-crystal diamond
2017
We study the photocurrent induced by pulsed-light illumination (pulse duration is several nanoseconds) of single-crystal diamond containing nitrogen impurities. Application of additional continuous-wave light of the same wavelength quenches pulsed photocurrent. Characterization of the optically quenched photocurrent and its recovery is important for the development of diamond based electronics and sensing. (C) 2017 Author(s). All article content, except where otherwise noted, is licensed under a Creative Commons Attribution (CC BY) license. This work was supported by AFOSR and the DARPA QuASAR program, by NSF Grant No. ECCS-1202258, and by DFG through the DIP program (FO 703/2-1).
Correction: Mechanical properties of provisional dental materials: A systematic review and meta-analysis.
2018
Provisional restorations represent an important phase during the rehabilitation process, knowledge of the mechanical properties of the available materials allows us to predict their clinical performance. At present, there is no systematic review, which supports the clinicians’ criteria, in the selection of a specific material over another for a particular clinical situation. The purpose of this systematic review and meta-analysis was to assess and compare the mechanical properties of dimethacrylates and monomethacrylates used in fabricating direct provisional restorations, in terms of flexural strength, fracture toughness and hardness. This review followed the PRISMA guidelines. The searche…
On the Variability of the Temperature Coefficients of mc-Si Solar Cells with Irradiance
2016
Abstract The temperature sensitivity of silicon solar cells is in general assumed to be constant with irradiance in PV forecasting models, although it has been demonstrated experimentally that this is not true. In this study a theoretical model is established that describes the variation of the temperature coefficients of a silicon solar cell as a function of the irradiance. It is shown that the temperature sensitivity of the solar cell efficiency is decreasing with the irradiance and that the main reason for this behavior comes from the increase of the open-circuit voltage with light intensity. Moreover, a dependency of the cell's ideality factor on the irradiance has to be assumed to rece…
Evaluation of dermal toxicity of antibacterial cotton textile coated by sol-gel technology
2017
AbstractThis paper reports about cotton textile modification by sol-gel technology with the purpose of obtaining antibacterial properties, evaluation of antibacterial properties and dermal toxicity tests of cotton textile with Zn and Si coating. Antibacterial properties evaluation against pathogenic microorganisms Pseudomonas aeruginosa, Staphylococcus aureus, and Escherichia coli made using the Parallel streak method in accordance with ATCC147 standard. For more specific evaluation of the coated textile, in vitro cytotoxicity test with epidermal HaCat cells was done. It is concluded that the coatings containing Zn and Si obtained by the sol-gel technology can impart antibacterial propertie…
Improving the high temperature oxidation resistance of pure titanium by shot-peening treatments
2017
International audience; Shot-peening (SP) treatments have shown their capacity to improve the oxidation resistance of titanium and zirconium thanks to the large compressive stresses and the surface hardening induced by this mechanical process. However, shot-peening treatments can produce a surface chemical deposit, which can modify the high temperature oxidation resistance. Here, we study pure titanium samples shot-peened with different type of balls: tungsten carbide, alumina or glass. The oxidation behavior was studied at 700 °C in dry air by thermo gravimetric analysis for short isotherm oxidation periods up to 100 h. Also, long oxidation tests (3000 h) at 700 °C were performed with an i…
Synthesis and characterisation of a ternary composite of polyaniline, reduced graphene-oxide and chitosan with reduced optical band gap and stable aq…
2019
A ternary composite comprising of p-toluene sulfonic acid doped polyaniline (PANI), chitosan and reduced graphene oxide (RGO) with stable aqueous dispersibility has been synthesised via oxidative polymerisation of aniline in chitosan/RGO dispersion. For comparison; PANI, PANI/chitosan and PANI/RGO composites were also synthesised using the same procedure. FTIR, Raman, XPS, XRD and UV-VIS confirmed the successful synthesis of the PANI and the composites. The aqueous dispersions of the PANI/chitosan and the ternary composites were found to be stable even after more than four months. The stability of the dispersion was attributed to the polycationic nature of the chitosan. The thermogravimetri…
Mechanical, thermal and electrical properties of nanostructured CNTs/SiC composites
2018
International audience; Dense SiC-based nanostructured composites reinforced by well-distributed carbon nanotubes (CNTs) were elaborated for the first time by spark plasma sintering (SPS) without sintering additive. Microstructures of materials containing different amounts of CNTs – up to 8.0 vol% – were correlated with their mechanical, electrical and thermal properties. A continuous decrease of the SiC grain size was observed when the amount of CNT was increased, while the evolution of density showed a different behavior that could be explained by the particular combination of SPS technique with the electrical resistivity evolution of the green bodies. Optimal effect of CNTs addition on h…