Search results for "BAND-GAP"
showing 10 items of 11 documents
Submicrometer in-plane integrated surface plasmon cavities.
2007
International audience; The optical properties of in-plane integrated surface plasmon polariton (SPP) cavities comprised of a thin film area sandwiched between two one-dimensional Bragg SPP mirrors are investigated numerically and experimentally. We discuss the resonance condition of these cavities, and we analyze in details the physical origin of the dispersion of this resonance. On the basis of numerical results, we show that in-plane SPP cavities can be used to achieve local SPP field enhancement and antireflecting SPP layers. The numerical results are compared to near-field optical images recorded by operating a photon scanning tunneling microscope. From the near-field images recorded o…
First principles modeling of 3d-metal doped three-layer fluorite-structured TiO2 (4,4) nanotube to be used for photocatalytic hydrogen production
2017
This study has been supported by the EC ERA.Net RUS Plus project No. 237 WATERSPLIT, Russian Basic Research Foundation No. 16-53-76019, and additionally by the IMIS2 Program (Latvia). The authors are also indebted to R. A. Evarestov and O. Lisovski for stimulating discussions as well as to A. Chesnokov for technical assistance.
Coherent control of stimulated emission inside one-dimensional Photonic Crystals
2005
In this paper, the quasinormal mode (QNM) theory is applied to discuss the quantum problem of an atom embedded inside a one-dimensional (1D) photonic band gap (PBG) cavity pumped by two counterpropagating laser beams. The e.m. field is quantized in terms of the QNMs in the 1D PBG and the atom modeled as a two-level system is assumed to be weakly coupled to just one of the QNMs. The main result of the paper is that the decay time depends on the position of the dipole inside the cavity, and can be controlled by the phase difference of the two laser beams. © 2005 The American Physical Society
Quantum enhancement of qutrit dynamics through driving field and photonic-band-gap crystal
2022
A comparative study of a qutrit (three-level atomic system) coupled to a classical field in a typical Markovian reservoir (free space) and in a photonic band-gap (PBG) crystal is carried out. The aim of the study is to assess the collective impact of structured environment and classical control of the system on the dynamics of quantum coherence, non-Markovianity, and estimation of parameters which are initially encoded in the atomic state. We show that the constructive interplay of PBG material as a medium and classical driving field as a part of system results in a significant enhancement of all the quantum traits of interest, compared to the case when the driven qutrit is in a Markovian e…
Band Gap Engineering and Trap Depths of Intrinsic Point Defects in RAlO3 (R = Y, La, Gd, Yb, Lu) Perovskites
2021
The work was supported by the Polish National Science Centre (Project No. 2018/31/B/ST8/00774), by the NATO SPS Project G5647, and by the Ministry of Education and Science of Ukraine (Project DB/Kinetyka no. 0119U002249). L.V. acknowledges support of the National Research Foundation of Ukraine under Grant No. 2020.02/0373 “Crystalline phosphors’ engineering for biomedical applications, energy saving lighting and contactless thermometry”. Researchers from Tartu were supported by the ERDF fundings in Estonia granted to the Centre of Excellence TK141 “Advanced materials and high-technology devices for sustainable energetics, sensorics and nanoelectronics (HiTechDevices)” (Grant No. 2014-2020.4…
Anodic Electro Deposition of CeO2 and Co-Doped CeO2 Thin Films
2013
CeO2 and Co containing CeO2 thin films were deposited on indium tin oxide and stainless steel by anodic electrodeposition. Scanning electron microscopy showed that the films are flat and show globular morphology and cracks resulting from volume shrinking. According to XRD and Raman Spectroscopy pure ceria layers are crystalline, while the presence of Co induces the formation of amorphous films. The good adhesion and the compactness allowed the photoelectrochemical characterization of the films. A band gap value of 2.9 eV was estimated for CeO2, while slightly higher values (̃3.0 eV) were estimated for Co containing films. A mechanism for ceria anodic electrodeposition is proposed and discus…
Band Gap Modeling of Different Ternary and Quaternary Alumina Garnet Phases Y3(AlXGa1-X)5O12 (YAGG) and Lu3(AlXGa1-X)5O12 (LuAGG). A Semiempirical Ap…
2022
A further generalization to quaternary oxide systems of the modeling equation of optical band gap values, based on the semiempirical correlation between the differences in the electronegativity of oxygen and the average cationic electronegativity, proposed some years ago, has been carried out by expanding the approach recently employed for ternary mixed oxides. The choice of oxide polymorphs and their influence on the fitting procedure of an experimental data set is evidenced by a detailed discussion of the fitting process of the literature's experimental band gap data pertaining two quaternary oxide systems of the garnet family, namely, Y3(AlxGa1-x)5O12 (YAGG) and Lu3(AlxGa1-x)5O12 (LuAGG)…
Dressed emitters as impurities
2021
Dressed states forming when quantum emitters or atoms couple to a photonic bath underpin a number of phenomena and applications, in particular dispersive effective interactions occurring within photonic bandgaps. Here, we present a compact formulation of the resolvent-based theory for calculating atom-photon dressed states built on the idea that the atom behaves as an effective impurity. This establishes an explicit connection with the standard impurity problem in condensed matter. Moreover, it allows us to formulate and settle in a model-independent context a number of properties previously known only for specific models or not entirely formalized. The framework is next extended to the cas…
Chemical Engineering of Photoactivity in Heterometallic Titanium–Organic Frameworks by Metal Doping
2018
[EN] We report a new family of titanium-organic frameworks that enlarges the limited number of crystalline, porous materials available for this metal. They are chemically robust and can be prepared as single crystals at multi-gram scale from multiple precursors. Their heterometallic structure enables engineering of their photoactivity by metal doping rather than by linker functionalization. Compared to other methodologies based on the post-synthetic metallation of MOFs, our approach is well-fitted for controlling the positioning of dopants at an atomic level to gain more precise control over the band-gap and electronic properties of the porous solid. Changes in the band-gap are also rationa…
Synthesis of Graphene Nanoribbons by Ambient-Pressure Chemical Vapor Deposition and Device Integration
2016
Graphene nanoribbons (GNRs), quasi-one-dimensional graphene strips, have shown great potential for nanoscale electronics, optoelectronics, and photonics. Atomically precise GNRs can be "bottom-up" synthesized by surface-assisted assembly of molecular building blocks under ultra-high-vacuum conditions. However, large-scale and efficient synthesis of such GNRs at low cost remains a significant challenge. Here we report an efficient "bottom-up" chemical vapor deposition (CVD) process for inexpensive and high-throughput growth of structurally defined GNRs with varying structures under ambient-pressure conditions. The high quality of our CVD-grown GNRs is validated by a combination of different …