Search results for "Biomaterial"
showing 10 items of 1350 documents
Determining efficacy of monitoring devices on ceramic bond to resin composite
2012
Objectives: This paper aims to assess the effectiveness of 3D nanoroughness and 2D microroughness evaluations, by their correlation with contact angle measurements and shear bond strength test, in order to evaluate the effect of two different acids conditioning on the bonding efficacy of a leucite-based glass-ceramic to a composite resin. Study Design: Ceramic (IPS Empress) blocks were treated as follows: 1) no treatment, 2) 37% phosphoric acid (H3PO4), 15 s, 3) 9% hydrofluoric acid (HF), 5 min. Micro- and nano-roughness were assessed with a profilometer and by means of an atomic force microscopy (AFM). Water contact angle (CA) measurements were determined to assess wettability of the ceram…
Hydrogen-Related Paramagnetic Centers in Ge-Doped Sol-Gel Silica Induced by γ-Ray Irradiation
2006
We have studied the generation mechanisms of H(II) paramagnetic centers in Ge-doped silica by investigating up to 104 mol ppm sol-gel Ge-doped silica materials. We have considered materials with the same concentrations of Ge but that are produced by two different densification routes that give rise to different concentrations of Ge-related oxygen deficient centers (GeODC(II)). These centers are characterized by an optical absorption band at ∼5.2 eV (B2 β band) and two related emissions at ∼3.2 eV and ∼4.3 eV. The GeODC(II) content was estimated by absorption and emission measurements. The H(II) centers were induced by room temperature γ-ray irradiation and their concentration was determined…
Bioengineering of the silica-polymerizing enzyme silicatein-alpha for a targeted application to hydroxyapatite.
2009
Since its discovery, numerous biotechnological approaches have aimed to explore the silica-polymerizing catalytic activity of the enzyme silicatein. In vivo, silicatein catalyzes polymerization of amorphous silica nanospheres from soluble precursors. In vitro, it directs the formation of nanostructured biosilica. This is of interest for various applications that strive to benefit from both the advantages of the biological system (i.e., silica synthesis under physiological conditions) and the cell mineralization-stimulating effect of biosilica. However, so far immobilization of silicatein has been hampered by the complex multistep procedure required. In addition, the chemical surface modific…
Laser-Fabricated Fluorescent, Ligand-Free Silicon Nanoparticles: Scale-up, Biosafety, and 3D Live Imaging of Zebrafish under Development
2022
This work rationalizes the scalable synthesis of ultrasmall, ligand-free silicon nanomaterials via liquid-phase pulsed laser ablation process using picosecond pulses at ultraviolet wavelengths. Results showed that the irradiation time drives hydrodynamic NP size. Isolated, monodisperse Si-NPs are obtained at high yield (72%) using post-treatment process. The obtained Si-NPs have an average size of 10 nm (not aggregated) and display photoemission in the green spectral range. We directly characterized the ligand-free Si-NPs in a vertebrate animal (zebrafish) and assessed their toxicity during the development. In vivo assay revealed that Si-NPs are found inside in all the early life stages of …
Novel Method of Preparation of Gold-Nanoparticle-Doped TiO2 and SiO2 Plasmonic Thin Films: Optical Characterization and Comparison with Maxwell-Garne…
2011
SiO2 and TiO2 thin films with gold nanoparticles (NPs) are of particular interest as photovoltaic materials. A novel method for the preparation of spin-coated SiO2–Au and TiO2–Au nanocomposites is presented. This fast and inexpensive method, which includes three separate stages, is based on the in situ synthesis of both the metal-oxide matrix and the Au NPs during a baking process at relatively low temperature. It allows the formation of nanocomposite thin films with a higher concentration of Au NPs than other methods. High-resolution transmission electron microscopy studies revealed a homogeneous distribution of NPs over the film volume along with their narrow size distribution. The optica…
Spinel-mullite composites with optical properties
1997
The aim of this paper was to study the synthesis and characterization of spinel-containing mullite based materials, using sol-gel techniques. Several gels were prepared, with nominal compositions 3(Al2−2xMx TixO3)·2SiO2 and 3(Al2−xMxO3)·2SiO2, with M=Ni+2 or Co+2 and 0.0≤x≤0.2, by hydrolysis and condensation of mixtures of aluminum, silicon and titanium alkoxides and nickel chloride. Dried gels were homogeneous and displayed a glass transition at around 750°C, which indicated that the system could be described as an amorphous silicoaluminate network.
Equivalences between refractive index and equilibrium water content of conventional and silicone hydrogel soft contact lenses from automated and manu…
2007
PURPOSE: The purpose of the present study was to develop mathematical relationships that allow obtaining equilibrium water content and refractive index of conventional and silicone hydrogel soft contact lenses from refractive index measures obtained with automated refractometry or equilibrium water content measures derived from manual refractometry, respectively. METHODS: Twelve HEMA-based hydrogels of different hydration and four siloxane-based polymers were assayed. A manual refractometer and a digital refractometer were used. Polynomial models obtained from the sucrose curves of equilibrium water content against refractive index and vice-versa were used either considering the whole range…
The rapid anastomosis between prevascularized networks on silk fibroin scaffolds generated in vitro with cocultures of human microvascular endothelia…
2010
The survival and functioning of a bone biomaterial upon implantation requires a rapidly forming and stably functioning vascularization that connects the implant to the recipient. We have previously shown that human microcapillary endothelial cells (HDMEC) and primary human osteoblast cells (HOS) in coculture on various 3-D bone biomaterial scaffolds rapidly distribute and self-assemble into a morphological structure resembling bone tissue. Endothelial cells form microcapillary-like structures containing a lumen and these were intertwined between the osteoblast cells and the biomaterial. This tissue-like self-assembly occurred in the absence of exogenously added angiogenic stimuli or artific…
Microscopic observations of superficial ultrastructure of unworn siloxane-hydrogel contact lenses by cryo-scanning electron microscopy
2006
The purpose of this study was to analyze three commercial siloxane-hydrogel contact lens materials, lotrafilcon A, balafilcon A, and galyfilcon A, by cryogenic scanning electron microscopy (cryoSEM). The fully hydrated lenses were frozen in slush liquid nitrogen and qualitatively observed in a cryogenic scanning electron microscope. The superficial ultrastructure of the siloxane-hydrogels was observed at the areas where the lens fractured during sample cryogenic preparation. There are qualitative differences among the three examined materials in the complex polymer network structure existing between the outer layer and the underlying polymer. CryoSEM, although destructive, is a useful tool …
Microscopic observation of unworn siloxane-hydrogel soft contact lenses by atomic force microscopy
2006
In the present study, samples of lotrafilcon A, balafilcon A, and galyfilcon A contact lenses were observed by atomic force microscopy (AFM) in tapping mode at areas ranging from 0.25 to 400 m2. Mean roughness (Ra), root-mean-square roughness (Rms) and maximum roughness (Rmax) in nanometers were obtained for the three lens materials at different magnifications. The three contact lenses showed significantly different surface topography. However, roughness values were dependent of the surface area to be analyzed. For a 1 m2 area, statistics revealed a significantly more irregular surface of balafilcon A (Ra = 6.44 nm; Rms = 8.30 nm; Rmax = 96.82 nm) compared with lotrafilcon A (Ra = 2.40 nm; …