Search results for "Biomaterials"
showing 10 items of 1265 documents
In-situ nano-silica deposition and air-abrasion with Bioglass 45S5 or aluminium oxide: Effects on methacrylate bonding to yttria-tetragonal zirconia …
2015
This study aimed at assessing the bonding performance after water storage (24 h/6-month) of a methacrylate-based cement applied onto Yttria-Tetragonal Zirconia Polycrystal(Y-TZP) pre-treated using an innovative in-situ silica nanoparticle deposition method and/or air-abrasion with Bioglass 45S5 (BAG) or aluminium oxide (AlO). Pre-sintered blocks of Y-TZP were coated with nano-silica using an experimental in-situ deposition method or used as received (control/silica-free). Air-abrasion was performed with AlO or BAG particles both on silica-coated and control Y-TZP specimens. All the specimens were then analysed using SEM– EDX. Further specimens were treated as described above, bonded using a…
Simulation of Young’s moduli for hexagonal ZnO [0 0 0 1]-oriented nanowires: first principles and molecular mechanical calculations
2017
The authors thank A Gulans, B Polyakov and S Vlassov for stimulating discussions. This study has been supported by the ERA.Net RUS Plus project No. 237 Watersplit. AB, RE and SL acknowledge the financial support by the Russian Foundation for Basic Research (Grant No. 17-03-00130-a) and the assistance of the Saint Petersburg State University Computer Center in the accomplishment of high-performance computations.
Ab initio calculations of indium arsenide in the wurtzite phase: structural, electronic and optical properties
2013
Most III-V semiconductors, which acquire the zinc-blende phase as bulk materials, adopt the metastable wurtzite phase when grown in the form of nanowires. These are new semiconductors with new optical properties, in particular, a different electronic band gap when compared with that grown in the zinc-blende phase. The electronic gap of wurtzite InAs at the Gamma-point of the Brillouin zone (E0 gap) has been recently measured, E0 = 0.46 eV at low temperature. The electronic gap at the A point of the Brillouin zone (equivalent to the L point in the zinc-blende structure, E1) has also been obtained recently based on a resonant Raman scattering experiment. In this work, we calculate the band st…
Adhesive joining of Aluminum AA6082: the effect of resin and surface treatment
2009
Abstract In this work the effects of both the substrate surface condition and the adhesive properties on single-lap aluminium joint resistance were analysed. The aluminium sheets were mechanically treated with two abrasive surfaces evaluating the induced roughness; four different resins were used in adhesion tests. Moreover, wettability tests were performed in order to evaluate the effect of the above-mentioned parameters on the substrate/adhesive interaction. A design of experiments was defined in order to quantify the effect of the considered factors and their correlation.
Effects of anodizing surface treatment on the mechanical strength of aluminum alloy 5083 to fibre reinforced composites adhesive joints
2021
Abstract In this study, the anodizing process based on the use of tartaric sulfuric acid solution (TSA) was carried out on metal substrate to evaluate for the first time its effect on the adhesion strength and corrosion resistance of aluminium alloy (i.e., AA5083) to fibre (i.e., basalt or glass) reinforced composite adhesive joints for nautical applications. Furthermore, some TSA anodized samples were soaked in a NaOH solution to investigate the influence of this post-immersion step on the joint performances. With the aim to improve the fibre-matrix adhesion in the composite substrate thus further increasing the overall mechanical response of the joint, glass and basalt fibres were treated…
Experimental and theoretical investigations of lignin-urea-formaldehyde wood adhesive: Density functional theory analysis
2021
Abstract In view of its chemical structure, lignin has recently become an interesting candidate for various applications. This work serves to optimize the isolation process of lignin from sugar industry by-product (bagasse can, molasses beet) applying alkali treatment. For this purpose, the effect of alkali and sulfuric acid concentrations have been studied ranging from 10% (w/v) to 20% (w/v) and 1.5 M–3 M, respectively. Moreover, the isolated lignins were characterized by different complementary analysis such as FT-IR and TGA/DTG. The aim behind this work is to reduce formaldehyde emissions and improving mechanical as well as physical properties of wood adhesive. Lignin was added with diff…
Stress-Strain State in the Zone of Load Transfer in a Composite Specimen under Uniaxial Tension
2004
The stress-strain state in the zone of load transfer in a uniaxially stretched specimen made of a unidirectional epoxy carbon-fiber-reinforced plastic (CFRP) is investigated. A parametric analysis of the influence of geometric and mechanical characteristics of the specimen on its stress-strain state is performed by means of finite-element modeling. The parameters allowing us to significantly reduce the dangerous concentration of transverse and tangential stresses are revealed. The mechanical tensile characteristics of a high-strength pultruded unidirectional CFRP are determined experimentally, and the size effect of its strength is estimated.
Static and dynamic elasticity of some thermotropic liquid-crystalline copolyesters
1997
Two series of thermotropic liquid crystalline copolyesters were studied in static and dynamic tensile deformation. Static loading generally does not lead to any peculiar phenomena: the stress-strain diagrams are linear or convex, except one copolyester fibre, the stress-strain diagram of which is concave at high temperatures. On the contrary, in dynamic loading the elasticity modulus increased during deformation for all the samples investigated. So it can be assumed that formation of a more rigid and stable structure takes place due to the dynamic deformation.
Accceleration of Fatigue Tests of Polymer Composite Materials by Using High-Frequency Loadings
2004
The possibility of using high-frequency loading in fatigue tests of polymer composite materials is discussed. A review of studies on the use of high-frequency loading of organic-, carbon-, and glass-fiber-reinforced plastics is presented. The results obtained are compared with those found in conventional low-frequency loadings. A rig for fatigue tests of rigid materials at loading frequencies to 500 Hz is described, and results for an LM-L1 unidirectional glass-fiber plastic in loadings with frequencies of 17 and 400 Hz are given. These results confirm that it is possible to accelerate the fatigue testing of polymer composite materials by considerably increasing the loading frequency. The n…
Creep and damage accumulation in orthotropic composites under cyclic loading
1998
Experimental results and theoretical prediction of the response of glassfiber-reinforced polyester under quasi-static, static (creep), and cyclic (fatigue) loading are presented. The nonlinear strain component at static loading and the strain amplitude rate at cyclic off-axis loading of an orthotropic composite are shown to follow the associated flow rule with a single-parameter quadratic potential function. The influence of fatigue damage on deformation is considerable due to the reduction in the elastic modulus of the composite and is apparently negligible with respect to its effect on the parameters of the creep kernel.