Search results for "Brewster"

1994

Liquid crystalline side chain polymers containing photoreactive azobenzene chromophores in the dark-adapted trans form and phenylbenzoate groups as co-mesogens have been prepared and investigated as monomolecular layers at the water/air interface and as multilayer assemblies deposited onto solid supports by the Langmuir–Blodgett–Kuhn (LBK) technique. Pressure area isotherms at variable temperatures together with reflection absorption spectra and Brewster angle microscopic pictures have been taken and analyzed (i) to derive information about the structural order and the packing properties of the mesogenic side groups within the monolayers of different homo- and co-polymeric systems and ii) t…

Pas de titre en anglais

2010

Within the quick nano-fabrication techniques evolution and the increasing needs in low space and energy opto-electronic functions on-chip integration, studies and control of electromagnetic resonances of sub-micrometric objects are crucial issues. One aim of this work was then to improve our knowledge of the light-matter interaction. To this end, optical near-field experiments and complementary numerical development of models have been performed to study electromagnetic resonances due to light-matter interaction in sub-micrometric resonators. As an introduction, the first part of the manuscript presents the main phenomena involved in near-field optical microscopy and the used SNOM operation…

Segregation of lipid in Ir-dye/DMPA mixed monolayers as strategy to fabricate 2D supramolecular nanostructures at the air–water interface

2008

A novel pseudospherical fluorinated iridium(III) derivative, Ir-dye/PF6, [Ir(F2-ppy)2(bpy)]PF6 (F2-ppy = 2-(2,4-difluoro)phenylpyridine, bpy = 2,2′-bipyridine), has been organized by using a lipid matrix, DMPA (dimyristoyl-phosphatidic acid), in several molar ratios at the air–water interface. The molecular organization of both components and the degree of miscibility in the different mixed films have been inferred by surface techniques such as π–A isotherms, ellipsometry, reflection spectroscopy, Brewster angle microscopy (BAM), and IR spectroscopy for the LB films, additionally the results have been discussed according to the additivity rule. The equimolecular Ir-dye/DMPA mixture leads to…

PLZT Electro-optic Q-switch for Er:Cr:YSGG laser

1999

Q-switching of the Er:Cr:YSGG laser at 2.79 micrometers is realized using electrooptic modulators of PLZT X/65/35 ceramics. The high (but slow as compared with single crystals) electrooptical effect in PLZT allowed to construct Q-switches with an aperture larger than 4 X 4 mm 2 , small lengths of 3 - 6 mm, with a control voltage of 1000 - 1500 V. Q-switching is realized using modulators in two modes--as a (lambda) /2 switch placed into the laser cavity at the Brewster angle avoiding reflection losses and as a (lambda) /4 switch with higher single pass losses due to Fresnel reflections. A higher laser output was obtained using (lambda) /2 switching. The obtained pulses had a halfwidth of 150…

A Simple Apparatus for the Determination of the Optical Constants and the Thickness of Absorbing Thin Films

2001

We report on a simple and inexpensive apparatus useful for measuring the optical constants n, k and the thickness of weakly absorbing thin films. The measurement is based on an accurate determination of the reflectance and transmittance of a specimen illuminated by a laser beam. The laser beam is incident on a transparent substrate coated with the film to be evaluated, with an angle of incidence equal to the Brewster angle for the substrate, and its polarization can be switched between the p and s states. If the thickness is known to be within a presumptive range, measurements of the p and s reflectance and transmittance allow a calculation of the optical constants n, k and the thickness of…

Improvement of solid state Er:YAG pulse laser performance for use in medicine

1999

The large quadratic electro-optic effect of PLZT ceramics allows to design small size modulators for the solid state infrared Er:YAG laser (lasing at (lambda) equals 2.94 micrometers - the most pronounced absorption band of water), which has found application in medicine for efficient ablation of hard and soft tissues. In the free-running mode, the Er:YAG laser emits spikes that form the pulse envelope with duration of 150 - 800 microsecond(s) . An extracavity PLZT 8.5/65/35 ceramics modulator (aperture of 4 X 6 mm2 and length of 18 mm) was used to obtain (Pi) -shaped segments with the rise and decay times less than 5 microsecond(s) . That allows to reduce considerably the fraction of the p…

Editorial: In Memoriam Dr. Marcus Brewster

2014

Molecular organization of a water-insoluble iridium(III) complex in mixed monolayers.

2007

Abstract In this work, organized mixed monolayers containing a cationic water-insoluble iridium(III) complex, Ir-dye, [Ir(ppy)2(tmphen)]PF6, (tmphen = 3,4,7,8-tetramethyl-1,10-phenanthroline, and ppy = 2-phenylpyridine), and an anionic lipid matrix, DMPA, dimyristoyl-phosphatidic acid, with different molar proportions, were formed by the co-spreading method at the air–water interface. The presence of the dye at the interface, as well as the molecular organization of the mixed films, is deduced from surface techniques such as π – A isotherms, Brewster angle microscopy (BAM) and reflection spectroscopy. The results obtained remark the formation of an equimolar mixed film, Ir-dye/DMPA = 1:1. B…

Dual-Emissive Photoluminescent Langmuir−Blodgett Films of Decatungstoeuropate and an Amphiphilic Iridium Complex

2009

Langmuir monolayers and Langmuir-Blodgett (LB) films of the decatungstoeuropate [Eu(W(5)O(18))(2)](9-) (EuW(10)) and the amphiphilic Ir complex 1 have been successfully fabricated by using the adsorption properties of the EuW(10) polyanion dissolved in the aqueous subphase onto a positively charged 1 monolayer at the air-water interface. The compression isotherms and Brewster angle microscopy (BAM) of monolayers of 1 on pure water (1 monolayer) and on a subphase containing 10(-6) M EuW(10) and 10(-3) M NaCl (1/EuW(10) monolayer) have been studied. Infrared and UV-vis spectroscopy of the transferred LB films indicate that EuW(10) and 1 molecules are incorporated within these LB films. X-ray …

An answer to two questions of Brewster and Yeh on M-groups

2003

Let χ be a (complex) irreducible character of a finite group. Recall that χ is monomial if there exists a linear character λ ∈ Irr(H), where H is some subgroup of G, such that χ = λG. A group is an M -group if all its irreducible characters are monomial. In 1992, B. Brewster and G. Yeh [1] raised the following two questions. Question A. Let M and N be normal subgroups of a group G. Assume that (|G : M |, |G : N |) = 1 and that M and N are M -groups. Does this imply that G is an M -group? ∗Research supported by the Basque Government, the Spanish Ministerio de Ciencia y Tecnoloǵia and the University of the Basque Country