Search results for "CHROMIUM"
showing 10 items of 494 documents
Optimisation of metallic interconnects for hydrogen production by high temperature water vapour electrolysis
2012
For economical and environmental reasons, hydrogen is considered as a major energetic vector for the future. Hydrogen production via high temperature water vapour electrolysis (HTE) is a promising technology. A major technical difficulty related to high temperature water vapour electrolysis is the development of interconnects working efficiently for a long period. Working temperature of 800°C enables the use of metallic materials as interconnects. Chromia forming alloys are among the best candidates. The interconnect material chosen in the present study is a ferritic stainless steel with 18% chromium content. High temperature corrosion resistance and electrical conductivity of the alloy was…
Support effect on the structure and CO oxidation activity of Cu-Cr mixed oxides over Al2O3 and SiO2
2009
Abstract Cu-Cr based catalysts supported on silica and alumina with 5 wt% total loading of (CuO + Cr2O3), in different molar ratios, were prepared by wet impregnation. The samples were studied by nitrogen adsorption isotherms (BET), temperature-programmed reduction (TPR), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). Their catalytic activity was tested in the CO oxidation reaction. Different structures were obtained in dependence of the support, the atomic ratio and the calcination temperature. In particular, whereas on Al2O3 there was no experimental evidence for interaction between Cu and Cr, over the silica supported systems formation of new phases CuCr2O4 and CuCrO…
Investigation of La2O3 and/or (Co,Mn)3O4 deposits on Crofer22APU for the SOFC interconnect application
2009
International audience; Chromia forming alloys (stainless steels) are among the best candidates for SOFC interconnects. However, problems of decreasing electronic conductivity during high temperature service and volatility of chromium oxide scales need to be solved. Electronically conductive surface coatings, which also reduce oxide scale growth and chromium volatility, are needed to improve stainless steel interconnects. The goal of this study is to investigate combinations of lanthanum oxide (La2O3) and cobalt manganese oxide ((Co,Mn)3O4) coatings on Crofer22APU stainless steel. Thin film coatings of La2O3 (~200 nm) and Co,Mn (1:1) (~2 mm) were deposited via metal organic chemical vapor d…
Excitation of different chromium centres by synchrotron radiation in MgO:Cr single crystals
2015
The excitation spectra for the emissions of chromium-containing centres have been measured at 10 K using synchrotron radiation of 4–32 eV in MgO single crystals with different content of Cr$^{3+}$ (5–850 ppm) and Ca$^{2+}$ impurity ions. Both virgin crystals and the samples preliminarily irradiated with x-rays at 295 K have been studied. The role of complex chromium centres containing two Cr$^{3+}$ and a cation vacancy (sometimes nearby a Ca$^{2+}$ ion) on the luminescence processes and the transformation/creation of structural defects has been analysed. Such anharmonic complex centres could serve as the seeds for the creation of 3D defects that facilitate the cracking and brittle destructi…
Inverse growth transport in thermal chromia scales on Fe–15Cr steels in oxygen and in water vapour and its effect on scale adhesion
2007
Chromia scales of near equivalent thickness were thermally grown on Fe–15Cr steels in 16O2 followed by 18O2 and in H216O followed by H218O. SIMS oxygen isotope profiles showed that oxidation in oxygen proceeded by outward chromium transport, whereas oxidation in H2O involved inward transport of hydroxide species. Adhesion measurements using room temperature tensile testing could quantify adhesion energy: 20 J m−2 for O2-grown scales and 80 J m−2 for scales formed in H2O, a result of this mass transport inversion.
Comparative assessment of surface roughness produced by hard machining with mixed ceramic tools including 2D and 3D analysis
2005
Abstract This paper provides a new comprehensive analysis of part surface finish in continuous dry turning of a hardened construction steel when using mixed alumina cutting tools. Consequently, the surface profiles (2D arragement) and surface microstereometries (3D arragement) generated during different hard part turning operations on a 40H low chromium alloy steel (equivalent to AISI 5140 or DIN 41Cr4), heat treated to the hardness of about 60 HRC, were evaluated. As a result, this paper aggregates the multi-parameters characterization of the surface roughness with the machined surface structure obtained at the three selected feed rates and constant cutting speed of 100 m/min. Results show…
Folded Cr12Co12 and Cr12Ni12 wheels: a sharp increase in nuclearity of heterometallic chromium rings
2014
Two novel record-sized heterometallic Cr12M12 (M = Co, Ni) chromium wheels with an unusual saddle-like architecture are created by reacting appropriate precursor complexes with the bridging ligand 2,2'-bipyrimidine.
Effects of electrolyte doping on electrodeposited nanostructured manganese oxide and chromium oxide
2020
Abstract Electrolyte additions are used to control the functionality of a nanostructured oxide. Dopant ions affect the size and shape of deposit crystallites and modify the host structure. Such ions can be incorporated into the deposit or form a separate oxide phase. The manganese dioxide family of polymorphs with ion-molecular sieve properties represents the additional possibilities of “template” effects of dopant ions on the phase composition, heterovalent substitution in the cationic sublattice, changes in morphology and alteration of nanocrystallite size during electrocrystallisation. The effects of electrolyte doping in electrodeposited, non-stoichiometric manganese dioxide (NH4+, Li+ …
Structure and Phase Changes in Natural and Synthetic Magnesium Aluminum Spinel
2015
Natural spinel crystals from Ural and Pamir deposits and synthetic magnesium aluminium spinel single crystals with different stoichiometry (MgO.nAl2O3 ) grown by Verneuil method were used. The photoluminescence (PL), its excitation (PLE) and optical absorption of stoichiometric and nonstoichiometric magnesium aluminium spinel crystals containing the chromium and manganese ions and defects produced by fast neutron irradiation( fluence up to 1020cm-2, E>0.1 MeV) are investigated. The broadening of R- and N-lines takes place in synthetic stoichiometric spinel. Structure of synthetic nonstoichiometric spinels (n>1) has to be more disordered, since in addition to the site exchange …