Search results for "CIRCuiTS"
showing 10 items of 358 documents
Multi-application Based Network-on-Chip Design for Mesh-of-Tree Topology Using Global Mapping and Reconfigurable Architecture
2019
This paper outlines a multi-application mapping for Mesh-of-Tree (MoT) topology based Network-on-Chip (NoC) design using reconfigurable architecture. A two phase Particle Swarm Optimization (PSO) has been proposed for reconfigurable architecture to minimize the communication cost. In first phase global mapping is done by combining multiple applications and in second phase, reconfiguration is achieved by switching the cores to near by routers using multiplexers. Experimentations have been carried out for several application benchmarks and synthetic applications generated using TGFF tool. The results show significant improvement in terms of communication cost after reconfiguration.
Fault-Tolerant Network-on-Chip Design for Mesh-of-Tree Topology Using Particle Swarm Optimization
2018
As the size of the chip is scaling down the density of Intellectual Property (IP) cores integrated on a chip has been increased rapidly. The communication between these IP cores on a chip is highly challenging. To overcome this issue, Network-on-Chip (NoC) has been proposed to provide an efficient and a scalable communication architecture. In the deep sub-micron level NoCs are prone to faults which can occur in any component of NoC. To build a reliable and robust systems, it is necessary to apply efficient fault-tolerant techniques. In this paper, we present a flexible spare core placement in Mesh-of-Tree (MoT) topology using Particle Swarm Optimization (PSO) by considering IP core failures…
Torus Topology based Fault-Tolerant Network-on-Chip Design with Flexible Spare Core Placement
2018
The increase in the density of the IP cores being fabricated on a chip poses on-chip communication challenges and heat dissipation. To overcome these issues, Network-onChip (NoC) based communication architecture is introduced. In the nanoscale era NoCs are prone to faults which results in performance degradation and un-reliability. Hence efficient fault-tolerant methods are required to make the system reliable in contrast to diverse component failures. This paper presents a flexible spare core placement in torus topology based faulttolerant NoC design. The communications related to the failed core is taken care by selecting the best position for a spare core in the torus network. By conside…
SiC Based Latching Current Limiter for High Voltage Space Power Distribution Systems
2018
This study presents a novel Latching Current Limiter topology, based on a N-channel Silicon Carbide (SiC) MOSFET as the main switching element. The design has been carried out using only discrete components, without digital controllers. This design has been validated by simulation and with a prototype. Tests have been performed at 1000V, modifying the limitation times, current-limiting values and eventually checking the proper operation of the system.
Robust Network Agreement on Logical Information
2011
Abstract Logical consensus is an approach to distributed decision making which is based on the availability of a network of agents with incomplete system knowledge. The method requires the construction of a Boolean map which defines a dynamic system allowing the entire network to consent on a unique, global decision. Previous work by the authors proved the method to be viable for applications such as intrusion detection within a structured environment, when the agent's communication topology is known in advance. The current work aims at providing a fully distributed protocol, requiring no a priori knowledge of each agent's communication neighbors. The protocol allows the construction of a r…
Anti-swing control of a hydraulic loader crane with a hanging load
2021
Abstract In this paper, anti-swing control for a hydraulic loader crane is presented. The difference between hydraulic and electric cranes are discussed to show the challenges associated with hydraulic actuation. The hanging load dynamics and relevant kinematics of the crane are derived to create the 2-DOF anti-swing controller. The anti-swing controller is added to the electro-hydraulic motion controller via feedforward. A dynamic simulation model of the crane is made, and the control system is evaluated in simulations with a path controller in actuator space. Simulation results show significant reduction in the load swing angle during motion. Experiments are carried out to verify the perf…
A Novel Solution for the Elimination of Mode Switching in Pump-Controlled Single-Rod Cylinders
2020
This paper concerns the stability issue of pump-controlled single-rod cylinders, known as mode switching. First, a review of the topic is provided. Thereafter, the most recently proposed solution for the elimination of mode switching is investigated and shown to result in unstable behavior under certain operating conditions. A theoretical analysis is provided demonstrating the underlying mechanisms of this behavior. Based on the analysis, a novel control strategy is proposed and investigated numerically. Proper operation and stability are demonstrated for a wide range of operating conditions, including situations under which the most recently proposed solution results in unstable behavior a…
Heat Pump Induction Motor Faults Caused by Soft Starter Topology — Case Study
2021
This paper presents a case study of electrical machine faults, emerging in heat pump systems. In Nordic countries, heat pumps have been gaining popularity during the past years and have become one of the leading ways of heating in households and smaller public buildings. Although not a very complicated setup, the devices used are still prone to unexpected failures, especially if wrongly chosen, installed or maintained. The paper presents a study conducted on five real-life cases with very similar outcomes and failure modes. The setup of the systems is explained, faults are listed and presented, causes of the faults including modeling and measurement data are provided. The suggestions are gi…
High-Performance Biocomputing in Synthetic Biology-Integrated Transcriptional and Metabolic Circuits
2019
Biocomputing uses molecular biology parts as the hardware to implement computational devices. By following pre-defined rules, often hard-coded into biological systems, these devices are able to process inputs and return outputs-thus computing information. Key to the success of any biocomputing endeavor is the availability of a wealth of molecular tools and biological motifs from which functional devices can be assembled. Synthetic biology is a fabulous playground for such purpose, offering numerous genetic parts that allow for the rational engineering of genetic circuits that mimic the behavior of electronic functions, such as logic gates. A grand challenge, as far as biocomputing is concer…
Interhemispheric inhibition is dynamically regulated during action observation
2016
International audience; It is now well established that the motor system plays a pivotal role in action observation and that the neurophysiological processes underlying perception and action overlaps. However, while various experiments have shown a specific facilitation of the contralateral motor cortex during action observation, no information is available concerning the dynamics of interhemispheric interactions. The aim of the present study was, therefore, to assess interhemispheric inhibition during the observation of others' actions. We designed a transcranial magnetic stimulation (TMS) experiment in which we measured both corticospinal excitability and interhemispheric inhibition, this…