Search results for "CKS"
showing 10 items of 611 documents
Effects of heat treatments on the properties of copper phthalocyanine films deposited by glow-discharge-induced sublimation
2006
Copper phthalocyanine films have been deposited by glow-discharge-induced sublimation. The films have undergone postdeposition heat treatments in air at 250 and 290 °C for different times, ranging from 30 min to 14 h. The properties of as-deposited and heated films have been investigated by different techniques in order to determine the effects of heat treatments on the film properties. Fourier transform infrared analysis and UV−visible optical absorption analysis point out a gradual evolution of the film structure from a mixture of α and β polymorphs to the only β polymorph in the sample heated at 290 °C for 14 h. A pronounced decrease of carbon and nitrogen atomic percentages against an o…
Highly textured Gd2Zr2O7 films grown on textured Ni-5at.%W substrates by solution deposition route: Growth, texture evolution, and microstructure dep…
2012
Abstract Growth, texture evolution and microstructure dependency of solution derived Gd 2 Zr 2 O 7 films deposited on textured Ni-5 at.%W substrates have been extensively studied. Influence of processing parameters, in particular annealing temperature and dwell time, as well as thickness effect on film texture and morphology are investigated in details. It is found that a rotated cube-on-cube epitaxy of Gd 2 Zr 2 O 7 //NiW in-plane texture forms as soon as the (004) out-plane texture appears, implying that epitaxial growth dominates the crystallization processes. Thermal energy plays an important role in minimizing the difference of interfacial energy along two directions in the anisotropic…
Atomic layer deposition of Ti-Nb-O thin films onto electrospun fibers for fibrous and tubular catalyst support structures
2018
Here, the authors report on the preparation of core-shell carbon-ceramic fibrous as well as ceramic tubular catalyst supports utilizing electrospinning and atomic layer deposition (ALD). In this paper, ALD of Ti-Nb-O thin films using TiCl4, Nb(OEt)5, and H2O as precursors is demonstrated. According to the time-of-flight-elastic recoil detection analysis and Rutherford backscattering spectrometry, carbon and hydrogen impurities were relatively low, but depend on the pulsing ratio of the precursors. Optimized ALD process was used for coating of sacrificial electrospun polyvinyl alcohol (PVA) template fibers to yield tubular Ti-Nb-O structures after thermal or solution based PVA removal. Anoth…
Development and analysis of a model based on chirped fiber Bragg gratings employed for cracks characterization in materials
2018
In this work a model was developed that allows to understand the behavior of a chirped fiber Bragg grating for the detection and characterization of cracks in materials. In addition to the amplitude response, we show that the group delay of the grating provides useful information for the characterization of the crack. The position of the crack can be determined thanks to the linear chirp of the grating that fixes a correlation between the spatial position and both, the wavelength and the group delay. However, our analysis shows that this simple approach has a source of error, which can be overcome if a controllable external strain can be applied to the embedded grating, additional to the st…
From fracture to damage mechanics: a behavior law for microcracked composites using the concept of crack opening mode
2010
International audience; Many studies have been carried out in order to build a coherent macroscopic behavior law for a composite containing microcracks. All of them are only partially coherent and none of them is complete. This study proposes a hyperelastic behavior law for a microcracked composite, respecting all the conditions associated with the damage activation/deactivation, stress/strain relation continuity, induced anisotropy and the Clausius–Duhem inequality. This approach is based on the definition of the Crack Opening Mode for Damage Mechanics as it exists in Fracture Mechanics.
Influence of plastic deformation on the microstructure and corrosion behaviour of Ti–10Mo–4Zr and Ti–6Al–4V alloys in the Ringer’s solution at 37°C
2015
Abstract The influence of plastic deformation on the microstructure and passivity of Ti–6Al–4V and Ti–10Mo–4Zr is studied. The content of titanium-based compounds in the passive film formed on the alloys increases under straining. In the region where necking occurs, the β-phase content drops in Ti–6Al–4V. The grain orientation spread increases with increasing strain. The quality index of EBSD maps is affected on Ti–10Mo–4Zr (dislocation structures along preferential orientations). The corrosion behaviour is investigated in the Ringer’s solution (37 °C). Results obtained in the anodic and cathodic domains are discussed considering changes described previously.
Mechanism of Heavy Element Retention in Hydrated Layers Formed on Leached Silicate Glasses
1988
ABSTRACTWe have investigated the relationship between hydrated layer formation during aqueous corrosion of silicates and retention of heavy elements (Fe, REE, actinides). Our approach is based on the comparison of the dissolution behaviour of silicate glasses, silicate minerals implanted with increasing doses of lead ions (1×E+12 to 1×E+15 ions/cm2), sorption experiments on silica surfaces and direct precipitation of hydrosilicates. The characterization of reacted surfaces was performed by combining Rutherford backscattering spectrometry (RBS) for profiling heavy elements with Resonant Nuclear Reaction Analysis (RNRA) for hydrogen profilimetry. The accumulation of these elements does not ne…
Porous inorganic–organic hybrid material by oxygen plasma treatment
2011
In this paper, we present the pore formation on inorganic–organic hybrid material, ORMOCER©, by reactive ion etching. ORMOCERs are composed of inorganic backbone where organic side groups are attached by cross-linking. Etching of ORMOCER in oxygen plasma generates porous materials with different pore sizes depending on the etching parameters. In addition to planar films, this pore formation process is applicable to micro and nanostructures. Characteristics of porous materials are evaluated by contact angle measurement, scanning electron microscopy, Fourier transform infrared-attenuated total reflectance spectroscopy, time-of-flight elastic recoil detection analysis and Rutherford backscatte…