Search results for "COMBUSTION"
showing 10 items of 232 documents
Experimental study of the pyrolysis of waste bitumen for oil production
2020
Abstract This work focuses on bitumen slow pyrolysis. Mass and energy yields of oil, solid and gas were obtained from pyrolysis experiments using a semi-batch reactor in a nitrogen atmosphere, under three non-isothermal conditions (maximum temperature: 450 °C, 500 °C and 550 °C). The effect of temperature on the product yields was discussed. The gas compositions were analysed using gas chromatography (GC) and the heating value of oil and solid residue was also measured. Using a thermo-gravimetric analyser, kinetic parameters were evaluated through Ozawa-Flynn-Wall (OFW) method. Results showed that oil yield is maximum at 500 °C (50%). Moreover, gas yield increased with increasing pyrolysis …
Constraining the ship contribution to the aerosol of the central Mediterranean
2017
Particulate matter with aerodynamic diameters lower than 10 µm, (PM10) aerosol samples were collected during summer 2013 within the framework of the Chemistry and Aerosol Mediterranean Experiment (ChArMEx) at two sites located north (Capo Granitola) and south (Lampedusa Island), respectively, of the main Mediterranean shipping route in the Straight of Sicily. The PM10 samples were collected with 12 h time resolutions at both sites. Selected metals, main anions, cations and elemental and organic carbon were determined. The evolution of soluble V and Ni concentrations (typical markers of heavy fuel oil combustion) was related to meteorology and ship traffic intensity in the Straight of Sicily…
FT-IR spectroscopy reveals that ash water repellency is highly dependent on ash chemical composition
2013
Abstract After a fire, an ash layer is commonly present, which influences soil properties and hillslope hydrology. The wettability of ash, which can vary from highly absorbent to water repellent, is an important characteristic in this context. Recent work has suggested that ash wettability is related to its degree of combustion, which in turn, can be expected to determine ash chemical composition. In this paper we therefore examine the relationship between ash water repellency and ash chemical composition. Ten ash samples with different wettability were each taken from four burned Mediterranean forest sites located at Albaida (A), Lliber (L), Navalon (N), and Pinoso (P), in the east of Spai…
Dynamical and statistical properties of high-temperature self-propagating fronts: An experimental study
2009
International audience; We present a detailed experimental study of high-temperature self-propagating fronts using image processing techniques. The intrinsic features of the wave propagation are investigated as a function of the combustion temperature TC for a model system made of titanium and silicon powders. Different front behavior is realized by changing the molar ratio x of the mixture Ti+xSi. Outside the range x=[0.3,1.5], no thermal front is propagating while inside, three regimes are observed: steady-state combustion which is characterized by a flat front propagating at constant velocity and two unsteady regimes. The combustion temperature (or the corresponding ratio x) is thus play…
Co3O4/CeO2 and Co3O4/CeO2–ZrO2 composite catalysts for methane combustion: Correlation between morphology reduction properties and catalytic activity
2005
Abstract Co3O4/CeO2 and Co3O4/CeO2–ZrO2 composite catalysts have been prepared by two different techniques, co-precipitation by citrate method and impregnation with cobalt nitrate of pre-formed ceria and ceria–zirconia oxides. The materials, as prepared and after ageing at 750 °C 7 h, were tested for methane combustion and the catalytic performances were compared with those of a commercial Co3O4, used as reference. A significant improvement of the activity was observed in the composite oxide Co3O4(30 wt%)/CeO2(70 wt%), prepared by citrate method, which exhibits the lowest light-off temperature of methane (T50 = 400 °C) and does not suffer deactivation after calcination at 750 °C 7 h.
Mechanical activation effect on the self-sustaining combustion reaction in the Mo–Si system
2001
Abstract Nanostructured molybdenum disilicide (MoSi2) was synthesized using an alternative route called MASHS (mechanically activated self-propagating high-temperature synthesis). This original process combines a short duration ball milling (MA) with a self-sustaining combustion (SHS). These two steps were investigated. The microstructure evolution of the powder mixture during mechanical activation was monitored using XRD profile analysis and TEM investigations. Short duration ball milling of (Mo+2Si) powder produces Mo and Si nanocrystallites into micrometric particles. It was demonstrated that pure α-MoSi2 with nanometric structure (DMoSi2=88 nm) could be produced via a very fast combusti…
Combustion Formation of Novel Nanomaterials: Synthesis and Cathodoluminescence of Silicon Carbide Nanowires
2009
This paper presents the combustion synthesis and characterization of one-dimensional silicon carbide nanostructures (nanowires of 3C-SiC polytype with zincblend structure) by means of cathodoluminescence technique. Cathodoluminescence spectra of nano-SiC samples and, as a reference, of a commercially available SiC micropowder are compared. It is shown that the emission band at 1.97 eV which is slightly evidenced in the spectrum of the commercial SiC under 10 keV electron beam irradiation becomes the prevailing band in CL of the purified silicon carbide nanowires.
Effect of a columnar defect on the shape of slow-combustion fronts
2003
We report experimental results for the behavior of slow-combustion fronts in the presence of a columnar defect with excess or reduced driving, and compare them with those of mean-field theory. We also compare them with simulation results for an analogous problem of driven flow of particles with hard-core repulsion (ASEP) and a single defect bond with a different hopping probability. The difference in the shape of the front profiles for excess vs. reduced driving in the defect, clearly demonstrates the existence of a KPZ-type of nonlinear term in the effective evolution equation for the slow-combustion fronts. We also find that slow-combustion fronts display a faceted form for large enough e…
Structural changes and distribution of accumulated tritium in the carbon based JET tiles
2011
Abstract In this study the tritium distribution and the effect of structural changes thereon have been analyzed in the bulk of the tile selected from the JET Mark II SRP divertor. Tritium content has been analyzed by the full combustion technique [1] . The structure has been investigated by the method of Scanning Electron Microscopy. Tritium depth profiles have been measured at different poloidal positions. A high specific activity of tritium (up to 156 MBq g −1 ) was found at the plasma-facing surface. At some tile positions up to 98–99% of the T can be in the surface slice of 1 mm thickness, whereas in other poloidal positions there can be more T in the bulk than at the surface. The struc…
Tritium retention measurements by accelerator mass spectrometry and full combustion of W-coated and uncoated CFC tiles from the JET divertor
2016
Abstract Accelerator mass spectrometry (AMS) and the full combustion method (FCM) followed by liquid scintillation counting were applied to quantitatively determine the tritium retention in the tungsten-coated carbon fibre composites (CFC), in comparison to uncoated CFC tiles from the JET divertor. The tiles were adjacent and exposed to plasma operations between 2007 and 2009. The tritium depth profiles are showing that the tritium retention on the W-coated tile was reduced by a factor of 13.5 in comparison to the uncoated tile whereas the bulk tritium concentration is approximately the same for both tiles.