Search results for "COMPOSITE"
showing 10 items of 4584 documents
Mechanical behaviour of Mater-Bi/wood flour composites: a statistical approach
2008
Interest in biocomposites (lignocellulosic filled biopolymers) started in the 90s, due to environmental advantages, related to the full biodegradability of both matrix and filler, economical issues (organic fillers usually come from sawmill or agriculture wastes) and aesthetical issues (wood filled biopolymers could be particularly pleasant if used for indoor furnishing and automotive interior). In this work, a method for a systematic study of the properties of Mater-Bi®/wood flour composites is presented. A two-level full factorial model was built. It allows investigating the effects of multiple operative variables on the observed properties, their contributions, their optimal combinations…
Effect of compatibilization on the photo-oxidation behaviour of polyethylene/polyamide 6 blends and their nanocomposites
2015
Abstract Polymer based nanocomposites are increasingly attracting interest from academia and industry, and the use of polymer blends as matrices greatly increase their potential field of application. In order to improve their characteristics, the use of compatibilizers acting on the blend components is mandatory. However, this also leads to rising concerns regarding the behaviour of polymer blend based nanocomposites upon being subjected to photo-oxidative degradation. It is known that morphology can deeply influence the photo-oxidative behaviour, and this can be therefore deeply influenced by the blend components and by the use of compatibilizers. In this work, polymer blend nanocomposites…
Degradation Behavior of Nanocomposite Polymer Blends
2014
The usefulness of any material, including nanocomposite polymer blends, depends on its degradability and durability. Thus, this chapter reviews the status of the research on degradation of nanocomposite polymer blends and, in particular, on clay-nanocomposite polymer blends, paying particular attention to both the role of the filler and the role of the blend morphology and composition. The results of recent research indicate that the clay has two opposing effects on the thermal stability of a nanocomposite polymer blend: (1) a promoter effect of the polymer matrix degradation, which decreases the thermal stability, and (2) a barrier effect, which improves the thermal stability. Moreover, th…
Rheological study of gel phenomena during epoxide network formation in the presence of sepiolite
2012
The dynamic behaviour during the crosslinking of an epoxy polymer near the gel point was monitored using rheological multiple frequency experiments. The influence of a needle-shaped inorganic nanofiller, sepiolite, either non-modified or organically surface modified during the cure process in the presence of an aliphatic and an aromatic hardener was investigated. The validity of various criteria for determining the gel point was examined for the crosslinking of these filled thermosets. The Winter–Chambon criterion at the gel point is obeyed by the unfilled and by the non-modified sepiolite-filled epoxy matrix with either of the two hardeners. However, physical gels are formed in the presenc…
Interpenetrated 3D porous scaffolds of silk fibroin with an amino and octadecyl functionalized hyaluronic acid
2015
An ethylenediamine (EDA) and octadecylamine (-C18) hyaluronic acid (HA) derivative, named HA-EDA-C18, has been used for the production of interpenetrated composite biomaterials with silk fibroin. The peculiar ionic strength sensibility of this HA derivative allows the production of porous matrices without the need for chemical crosslinking. Scaffolds have been produced through a salt leaching procedure by exploiting the properties of silk fibroin and HA-EDA-C18 to physically crosslink when forced through a syringe loaded with NaCl. The porosity of the sponges, comprised between 70-80%, was dependent on the amount of each polymer and NaCl size distribution. Moreover, through FT-IR analysis, …
Studies on the Fibrous Components of the Test ofCiona intestinalisLinnaeus. I. Cellulose-like Polysaccharide
1977
Chemical, histochemical and electron microscopic studies on the fibrous polysaccharide component of the test of Ciona intestinalis L. were made. The results showed cellulose-like fibres to be present in the cuticle layer and in the ground substance. Bundles of fibres varying in diameter from 80 to 600 nm interweave to form a conspicuous network. The bundle appears to be formed of flat fibres, 10–13 nm in width, while the fibre is composed of fibrils 3.5–5 nm; the rectangular cross section of fibres can be supposed. The probable role of this polysaccharide is discussed.
Diferrocenyl tosyl hydrazone with an ultrastrong NHFe hydrogen bond as double click switch.
2014
The intramolecular NH⋯Fe hydrogen bond in diferrocenyl hydrazone 2 raises the barrier for intramolecular electron transfer in its mixed-valent cation 2+ and is only disrupted by double oxidation to 22+.
Maghemite polymer nanocomposites with modulated magnetic properties
2007
A method is presented for the production of maghemite polymer nanocomposites with modulated magnetic properties. Magnetic nanocomposites prepared using this method show regular variation in the magnetic blocking temperature from 2 K to 300 K, and variation in the saturation magnetization from 0 to 50 emu g � 1 (Fe2O3). The method is based on the in situ formation of maghemite nanoparticles in nitrogen-base polymer matrixes. The particle size can be varied regularly from 1.5 nm to 16 nm by changing the ratio of iron loading in the polymer and/or the Fe(II)/Fe(III) ratios. The particles are isolated and uniformly distributed within the matrix. The mate
Crystal structures, infrared-spectra, and thermal behavior of calcium hydrogenselenite monohydrate, Ca(HSeO3)2 · H2O, and dicalcium diselenite bis(hy…
1986
Abstract Calcium hydrogenselenite monohydrate and dicalcium diselenite bis(hydrogenselenite) were synthesized and their crystal structures determined. Crystal data for Ca(HSeO3)2 · H2O: a = 6.911(2), b = 7.369(2), c = 6.739(2) A, α = 90.51(3)°, β = 90.93(3)°, γ = 107.46(2)°, V = 327.3(2) A3, space group P 1 (No. 2), dcalcd = 3.19 M gm−3, Z = 2, and R = 0.036 for 1503 reflections. Data for Ca2(HSeO3)2(Se2O5): a = 14.719(4), b = 7.059(2), c = 11.793(2) A, β = 117.96(2)°, V = 1082.3(4) A3, space group C2 c (No. 15), dcalcd = 3.52 Mg m−3, Z = 4, and R = 0.047 for 1251 reflections. Both structures form a three-dimensional network. The coordination polyhedron around calcium is a monocapped trigon…
Synthesis, characterization and thermal properties of small R2R′2N+X−-type quaternary ammonium halides
2005
Twenty-one R {sub 2} R {sup '} {sub 2}N{sup +} X {sup -} -type (R=methyl or ethyl, R {sup '}=alkyl, X=Br or I) quaternary ammonium (QA) halides have been prepared by using a novel one-pot synthetic route in which a formamide (dimethyl-, diethylformamide, etc.) is treated with alkyl halide in the presence of sodium or potassium carbonate. The formation of QA halides was verified with {sup 1}H-NMR, {sup 13}C-NMR, MS and elemental analysis. The crystal structures of four QA halides (two bromide and two iodide) were determined using X-ray single crystal diffraction, and the powder diffraction method was used to study the structural similarities between the single crystal and microcrystalline bu…