Search results for "COPP"
showing 10 items of 3147 documents
Oxygen defects: The key parameter controlling the activity and selectivity of mesoporous copper-doped ceria for the total oxidation of naphthalene
2012
Mesoporous CeO2 modified by the addition of copper has shown high efficiency for the total oxidation of naphthalene. High activity and 100% selectivity to carbon dioxide throughout the whole range of temperatures studied were achieved for copper loadings of 3.6% and lower. The catalytic behaviour has been related to the concentration of surface oxygen defects. A clear correlation between the concentration of surface oxygen defects (determined by XPS and DRIFTS) and the catalytic performance has been identified. Catalytic activity increased as copper was incorporated into the ceria up to 3.6%. In this range of copper content the copper was incorporated into the cubic fluorite lattice of CeO2…
Bond strength dependent superionic phase transformation in the solid solution series Cu2ZnGeSe4−xSx
2014
Recently, copper selenides have shown to be promising thermoelectric materials due to their possible superionic character resulting from mobile copper cations. Inspired by this recent development in the class of quaternary copper selenides we have focused on the structure-to-property relationships in the solid solution series Cu2ZnGeSe4−xSx. The material exhibits an insulator-to-metal transition at higher temperatures, with a transition temperature dependent on the sulfur content. However, the lattice parameters show linear thermal expansion at elevated temperatures only and therefore no indication of a structural phase transformation. 63Cu nuclear magnetic resonance shows clear indications…
Catalytic oxidation of n-hexane promoted by Ce1-xCuxO2 catalysts prepared by one-step polymeric precursor method
2013
Abstract Ceria-supported copper catalysts (Ce1−xCuxO2, with x (mol) = 0, 0.01, 0.03, 0.05 and 0.10) were prepared in one step through the polymeric precursor method. The textural properties of the catalysts were investigated by X-ray diffraction (XRD), Rietveld refinement, N2-physisorption (BET surface area), electron paramagnetic resonance (EPR), UV–visible diffuse reflectance and photoluminescence spectroscopies and temperature-programmed reduction (TPR). In a previous study ceria-supported copper catalysts were found to be efficient in the preferential oxidation of CO. In this study, we extended the catalytic application of Ce1−xCuxO2 systems to n-hexane oxidation and it was verified tha…
Anti-bacterial activity of graphene oxide as a new weapon nanomaterial to combat multidrug-resistance bacteria.
2016
Antibiotic resistance in microbial pathogens has become a serious health problem in the world. The increasing spread of hospital acquired infections especially in immunocompromised and cancer patients caused by multidrug-resistant (MDR) microbial pathogens is restricting the choices for impressive antibiotic therapy. So many efforts have been made to develop new compounds with antimicrobial activity. In recent years, nanoparticles, particularly graphene oxide (GO) nanoparticles have found many applications in various fields, including antibacterial action, pathogens bio detection, cancer therapy, and drug and gene delivery. The use of graphene oxide as an antibacterial agent for the treatme…
Inverse-voltammetric determination of bismuth in biomaterials with computer assisted peak evaluation
1988
The inverse-voltammetric determination of low bismuth concentrations in a 1 mol/l HCl as supporting electrolyte was investigated with regard to optimal working conditions. New and old types of mercury-drop electrodes and mercury-film electrodes were compared concerning their sensibility, selectivity and interferences. With both electrodes the determination of 0.1 μg/l to 0.01 μg/l bismuth is possible. The influence of a large excess of copper and antimony on the inverse-voltammetric determination of bismuth was studied in detail.
Microanalytical characterization of decorations in handmade ancient floor tiles using inductively coupled plasma optical emission spectrometry (ICP-O…
2013
In this study a total of 114 glazed decorations of 42 ceramic floor tiles, manufactured in Sicily fromthe 16th to 19 the 21th AD, were investigated. The micro sampling method, proposed by us, using a cotton swab soaked in hydrofluoric acid, includes advantages of high sensitivity, high selectivity, simplicity, speed, not expensive and can be considered non-destructive because the point of sampling remains invisible to the human eye. ICP-OES technique was used in this study. Twenty-four elements (Al, As, B, Be, Ba, Ca, Cd, Co, Cr, Cu, Fe, K, Mg, Mn, Mo, Ni, Pb, Sb, Se, Si, Sn, Ti, V and Zn) were determined in each colored enamel. Enameled decorations in Sicilian tiles were varied in tones an…
Luminescent copper(i) complexes with bisphosphane and halogen-substituted 2,2′-bipyridine ligands
2018
Heteroleptic [Cu(P^P)(N^N)][PF6] complexes, where N^N is a halo-substituted 2,2'-bipyridine (bpy) and P^P is either bis(2-(diphenylphosphino)phenyl)ether (POP) or 4,5-bis(diphenylphosphino)-9,9- dimethylxanthene (xantphos) have been synthesized and investigated. To stabilize the tetrahedral geometry of the copper(I) complexes, the steric demands of the bpy ligands have been increased by introducing 6- or 6,6'-halo-substituents in 6,6'-dichloro-2,2'-bipyridine (6,6'-Cl2bpy), 6-bromo-2,2'- bipyridine (6-Brbpy) and 6,6'-dibromo-2,2'-bipyridine (6,6'-Br2bpy). The solid-state structures of [Cu(POP)(6,6'-Cl2bpy)][PF6], [Cu(xantphos)(6,6'-Cl2bpy)][PF6].CH2Cl2, [Cu(POP)(6-Brbpy)][PF6] and [Cu(xantp…
Modeling Corrosion of Archaeological Silver-Copper Coins Using the Voltammetry of Immobilized Particles
2012
Two complementary models to describe the long-term corrosion of silver-copper coins, based on potential rate laws for smooth corrosion and those combined with diffusive law, for gross corrosion, are proposed. Theoretical kinetics can be tested using signatures of copper and silver corrosion products using the voltammetry of immobilized particles technique. The method is applied to silver coins minted during the 13th–14th centuries from the Libertad street hoard in Valencia (Spain) using non-invasive one-touch graphite pencil sampling. Voltammetric features yield functional dependences in agreement with the proposed model potentially useful for distinguishing between different mints.
Cu cluster shell structure at elevated temperatures
1991
Equilibrium structures of small (3--29)-atom Cu clusters are determined by simulated annealing, and finite-temperature ensembles are simulated by Monte Carlo techniques using the effective-medium theory for the energy calculation. Clusters with 8, 18, and 20 atoms are found to be particularly stable. The equilibrium geometrical structures are determined and found to be determined by a Jahn-Teller distortion, which is found to affect the geometry also at high temperatures. The ``magic'' clusters retain their large stability even at elevated temperatures.