Search results for "CORROSION"

Searching for a robust strategy for minimizing alkali chlorides in fluidized bed boilers during burning of high SRF-energy-share fuel

2015

Abstract To meet the increasing volume of waste to be treated via energy recovery, high SRF-energy-share fuel is being fired in conventional waste-to-energy facilities. In this work, corrosion related risk during firing of 70 e-% share (target fuel) is studied and compared against the base case fuel containing 50 e-% share. Cl and S concentration is highest in the target fuel as a direct result of increasing the proportion of SRF in the fuel mixture. Br, Zn and Pb showed the same trend. Meanwhile, the concentration of Na, K, Al and Si are highly dependent on the type of the SRF fired. The corrosion risk of the base and target fuels are analyzed using the composition of the fine aerosol frac…

Stretch-induced Intussuceptive and Sprouting Angiogenesis in the Chick Chorioallantoic Membrane

2014

Vascular systems grow and remodel in response to not only metabolic needs, but also mechanical influences as well. Here, we investigated the influence of tissue-level mechanical forces on the patterning and structure of the chick chorioallantoic membrane (CAM) microcirculation. A dipole stretch field was applied to the CAM using custom computer-controlled servomotors. The topography of the stretch field was mapped using finite element models. After 3 days of stretch, Sholl analysis of the CAM demonstrated a 7-fold increase in conducting vessel intersections within the stretch field (p 0.05). In contrast, corrosion casting and SEM of the stretch field capillary meshwork demonstrated intense …

A novel scientific approach to the conservation of archaeological copper alloys artefacts

2007

A novel research approach focused on innovative materials and methods to assure the long-term stability of bronze archaeological artefacts during exhibition and storage is reported. The work deals with the application of advanced analytical techniques and the development, characterisation and testing of materials and procedures for the conservation, protection and restoration of ancient Cu-based alloy artefacts. Our first aim was the selection of Cu-based alloy artefacts from different archaeological sites in Southern Italy with respect of chemical composition, metallurgical features and corrosion products. This step allowed the identification of the ancient alloys, the study of natural pat…

FIB-FESEM and EMPA results on Antoninianus silver coins for manufacturing and corrosion processes

2018

[EN] A set of ancient Antoninianus silver coins, dating back between 249 and 274¿A.D. and minted in Rome, Galliae, Orient and Ticinum, have been characterized. We use, for the first time, a combination of nano-invasive (focused ion beam-field emission scanning electron microscopy-X-ray microanalysis (FIB-FESEM-EDX), voltammetry of microparticles (VIMP)) and destructive techniques (scanning electron microscopy (SEM-EDX) and electron microprobe analysis (EMPA)) along with non-invasive, i.e., micro-Raman spectroscopy. The results revealed that, contrary to the extended belief, a complex Ag-Cu-Pb-Sn alloy was used. The use of alloys was common in the flourishing years of the Roman Empire. In th…

Changes in surface stress, morphology and chemical composition of silica and silicon nitride surfaces during the etching by gaseous HF acid

2007

International audience; HF acid attack of SiO2 and Si3N4 substrates is analyzed to improve the sensitivity of a sensor based on inicrocantilever. Ex situ analysis of the etching using XPS, SIMS and AFM show significant changes in the anisotropy and the rate of the etching of the oxides on SiO2 and Si3N4 surface. Those differences influence the kinetic evolution of the plastic bending deflection of the cantilever coated with SiO2 and Si3N4 layer, respectively. The linear dependence between the HF concentration and the Si3N4 cantilever bending corresponds to a deep attack of the layer whereas the nonlinear behavior observed for SiO2 layer can be explained by a combination of deep and lateral …

CaP-Bioglass composite coating by galvanic deposition

Orthopedic devices are increasingly used in our life to improve the health of patients after bone fractures due to accidents, aging, or sports injuries. Metallic materials (i.e. stainless steel, titanium alloys chromium alloys) are widely employed to fabricate prostheses, screws, and osteosynthesis plates. Although metals could be good mechanical properties like human bone, corrosion phenomena could occur, causing in the worst cases the failure of orthopedic implants. In addition, metal ions released around periprosthetic tissues could arise allergenic and cancerogenic effects. Nowadays, the research was focused on coating science to deal with these issues. In particular, the development of…

DC01 steel corrosion resistance in cathodic polarization

2016

Celem prowadzonych badań było okreœlenie odporności korozyjnej stali DC01 poddanej katodowej polaryzacji w zmiennych warunkach. Elektrochemiczne pomiary służące do oceny odpornoœci korozyjnej stali nienawodorowanej poddanej katodowej polaryzacji przeprowadzono metodami obejmującymi pomiar potencjału obwodu otwartego i zarejestrowania zależności i=f(E) podczas badań polaryzacyjnych w trójelektrodowym układzie pomiarowym. Do pomiarów wykorzystano układ składający się z naczynka pomiarowego, potencjostatu AMEL PSW01 System 5000 oraz komputera z oprogramowaniem „CorrWare”. Wodorowanie stali zrealizowano w wodnym roztworze 0,1 N kwasu siarkowego(VI) z dodatkiem 2 mg/dm3 tlenku arsenu(III) jako p…

A Mössbauer study of the crystalline structure of the passive film formed on iron in aqueous sulfate solution containing sulfite in low concentration

1993

Electrochemically induced passivation of evaporated, enriched 57Fe in 0.5 mol dm−3 Na2SO4 + 0.001 mol dm−3 NaHSO3 aqueous solution (pH 6.5) was followed by conversion electron Mossbauer spectroscopy. The transformation of amorphous iron oxide or hydroxide into crystalline γ-FeOOH could be observed with the increase of the polarization time. The comparison of the original quantity of evaporated, enriched 57Fe layer on the surface of the samples with the dissolved iron, measured in the solutions after the polarization, proved the existence of pitting corrosion at this pH.

Electrochemical Characterization of Corrosion Products in Leaded Bronze Sculptures Considering Ohmic Drop Effects on Tafel Analysis

2015

[EN] The characterization of corrosion products in leaded bronze based on the voltammetry of immobilized particles methodology is described. Voltammetric data, supported by Fourier transform infra-red spectroscopy, field emission scanning electron microscopy-energy dispersive X-ray microanalysis (FESEM-EDX) and scanning electrochemical microscopy (SECM) allow the identification of copper and lead corrosion materials. The mutual influence of such products is modeled upon considering uncompensated ohmic drops in the Tafel analysis of the rising portion of the respective voltammetric signals for their electrochemical reduction.

Behavior of Calcium Phosphate–Chitosan–Collagen Composite Coating on AISI 304 for Orthopedic Applications

2022

Calcium phosphate/chitosan/collagen composite coating on AISI 304 stainless steel was investigated. Coatings were realized by galvanic coupling that occurs without an external power supply because it begins with the coupling between two metals with different standard electrochemical potentials. The process consists of the co-deposition of the three components with the calcium phosphate crystals incorporated into the polymeric composite of chitosan and collagen. Physical-chemical characterizations of the samples were executed to evaluate morphology and chemical composition. Morphological analyses have shown that the surface of the stainless steel is covered by the deposit, which has a very r…