Search results for "Calibration"
showing 10 items of 890 documents
Experimental sulphide inhibition calibration method in nitrification processes: A case-study.
2020
[EN] Sulphide is one of the inhibitors in the nitrification process in WWTP in regions with sulphate rich soils. As little information is currently available on sulphide nitrification inhibition, the aim of this study was to develop a method based on a modification of the Successive Additions Method to calibrate the effect of sulphide on the activity of ammonia-oxidising bacteria (AOB) and nitrite-oxidising bacteria (NOB). The developed method was then applied to activated sludge samples from two WWTPs with different influent sulphide concentrations. In both cases, sulphide had a greater inhibitory effect on NOB than AOB activity. The sulphide inhibition was found to be lower in the activat…
A method for measuring low-weight carboxylic acids from biosolid compost
2006
Concentration of low-weight carboxylic acids (LWCA) is one of the important parameters that should be taken into consideration when compost is applied as soil improver for plant cultivation, because high amounts of LWCA can be toxic to plants. The present work describes a method for analysis of LWCA in compost as a useful tool for monitoring compost quality and safety. The method was tested on compost samples of two different ages: 3 (immature) and 6 (mature) months old. Acids from compost samples were extracted at high pH, filtered, and freeze-dried. The dried sodium salts were derivatized with a sulfuric acid–methanol mixture and concentrations of 11 low-weight fatty acids (C1–C10) were a…
Integrated urban water modelling with uncertainty analysis
2006
In the last twenty years, the scientific world has paid particular care towards the problems that involve the environment. Accordingly, several researches were developed to describe phenomena that take place during both wet and dry periods and to increase the knowledge in this field. In particular, attention was addressed towards the problems linked with receiving water body pollution because of the impact of rain water in the urban environment. In order to obtain a good description of the problem, it is important to analyse both quantity and quality aspects connected with all the transformation phases that characterise the urban water cycle. Today, according to this point, integrated model…
The influence of rainfall time resolution for urban water quality modelling
2010
The objective of this paper is the definition of a methodology to evaluate the impact of the temporal resolution of rainfall measurements in urban drainage modelling applications. More specifically the effect of the temporal resolution on urban water quality modelling is detected analysing the uncertainty of the response of rainfall–runoff modelling. Analyses have been carried out using historical rainfall–discharge data collected for the Fossolo catchment (Bologna, Italy). According to the methodology, the historical rainfall data are taken as a reference, and resampled data have been obtained through a rescaling procedure with variable temporal windows. The shape comparison between ‘true’…
Bayesian inference analysis of the uncertainty linked to the evaluation of potential flood damage in urban areas.
2012
Flood damage in urbanized watersheds may be assessed by combining the flood depth–damage curves and the outputs of urban flood models. The complexity of the physical processes that must be simulated and the limited amount of data available for model calibration may lead to high uncertainty in the model results and consequently in damage estimation. Moreover depth–damage functions are usually affected by significant uncertainty related to the collected data and to the simplified structure of the regression law that is used. The present paper carries out the analysis of the uncertainty connected to the flood damage estimate obtained combining the use of hydraulic models and depth–damage curve…
Effect of pH, substrate and free nitrous acid concentrations on ammonium oxidation rate.
2012
Respirometric techniques have been used to determine the effect of pH, free nitrous acid (FNA) and substrate concentration on the activity of the ammonium oxidizing bacteria (AOB) present in an activated sludge reactor. With this aim, bacterial activity has been measured at different pH values (ranging from 6.2 to 9.7), total ammonium nitrogen concentrations (ranging from 0.1 to 10 mg TAN L-1) and total nitrite concentrations (ranging from 3 to 43 mg NO2-N L-1). According to the results obtained, the most appropriate kinetic expression for the growth of AOB in activated sludge reactors has been established. Substrate half saturation constant and FNA and pH inhibition constants have been obt…
Assessment of clogging in constructed wetlands by saturated hydraulic conductivity measurements
2019
Abstract This study aims at defining a methodology to evaluate Ks reductions of gravel material constituting constructed wetland (CW) bed matrices. Several schemes and equations for the Lefranc's test were compared by using different gravel sizes and at multiple spatial scales. The falling-head test method was implemented by using two steel permeameters: one impervious (IMP) and one pervious (P) on one side. At laboratory scale, mean K values for a small size gravel (8–15 × 10−2 m) measured by the IMP and the P permeameters were equal to 19,466 m/d and 30,662 m/d, respectively. Mean Ks values for a big size gravel (10–25 × 10−2 m) measured by the IMP and the P permeameters were equal to 12,…
Biotrickling filter modeling for styrene abatement. Part 2: Simulating a two-phase partitioning bioreactor.
2017
Abstract A dynamic model describing styrene abatement was developed for a two-phase partitioning bioreactor operated as a biotrickling filter (TPPB-BTF). The model was built as a coupled set of two different systems of partial differential equations depending on whether an irrigation or a non-irrigation period was simulated. The maximum growth rate was previously calibrated from a conventional BTF treating styrene (Part 1). The model was extended to simulate the TPPB-BTF based on the hypothesis that the main change associated with the non-aqueous phase is the modification of the pollutant properties in the liquid phase. The three phases considered were gas, a water–silicone liquid mixture, …
Calibration of denitrifying activity of polyphosphate accumulating organisms in an extended ASM2d model
2010
Abstract This paper presents the results of an experimental study for the modelling and calibration of denitrifying activity of polyphosphate accumulating organisms (PAOs) in full-scale WWTPs that incorporate simultaneous nitrogen and phosphorus removal. The convenience of using different yields under aerobic and anoxic conditions for modelling biological phosphorus removal processes with the ASM2d has been demonstrated. Thus, parameter ηPAO in the model is given a physical meaning and represents the fraction of PAOs that are able to follow the DPAO metabolism. Using stoichiometric relationships, which are based on assumed biochemical pathways, the anoxic yields considered in the extended A…
Global sensitivity and uncertainty analysis of a microalgae model for wastewater treatment.
2022
The results of a global sensitivity and uncertainty analysis of a microalgae model applied to a Membrane Photobioreactor (MPBR) pilot plant were assessed. The main goals of this study were: (I) to identify the sensitivity factors of the model through the Morris screening method, i.e. the most influential factors; (II) to calibrate the influential factors online or offline; and (III) to assess the model's uncertainty. Four experimental periods were evaluated, which encompassed a wide range of environmental and operational conditions. Eleven influential factors (e.g. maximum specific growth rate, light intensity and maximum temperature) were identified in the model from a set of 34 kinetic pa…