Search results for "Catalysis"

showing 10 items of 5944 documents

The different catalytic behaviour in the propane total oxidation of cobalt and manganese oxides prepared by a wet combustion procedure

2013

Abstract Cobalt oxide and manganese oxide catalysts have been prepared through aqueous synthesis using a wet combustion procedure. These materials have been tested as catalysts for the total oxidation of propane. It has been observed a different catalytic behaviour between cobalt and manganese oxides although for both oxides a very high catalytic activity has been obtained. Cobalt oxides prepared by the wet combustion procedure are less reactive than a simple cobalt oxide prepared without the addition of organic acids. However, in the case of manganese oxide the use of organic acids highly increases the catalytic activity. The different catalytic behaviour has been related to the variation …

inorganic chemicalsAqueous solutionChemistryGeneral Chemical EngineeringInorganic chemistrychemistry.chemical_elementGeneral ChemistryManganeseCombustionOxygenRedoxIndustrial and Manufacturing EngineeringCatalysisEnvironmental ChemistryCobalt oxideCobaltChemical Engineering Journal
researchProduct

Post-synthesis alumination of MCM-41: Effect of the acidity on the HDS activity of supported Pd catalysts

2010

Abstract Siliceous MCM-41 with different amount of alumina, from 0.25 up to 4.0 wt%, were prepared by impregnation of the MCM-41 with aqueous solution of Al(NO) 3 ·9H 2 O. The modified mesoporous silicas were then used as supports for Pd catalysts prepared by wet-impregnation from PdCl 2 precursor. Supports and corresponding Pd catalysts were characterized by XRD, XPS and NH 3 -TPD. The catalytic behavior was tested in the hydrodesulfurization (HDS) reaction of thiophene. An increase of the hydrodesulfurization activity with increasing alumina amount up to 0.5 wt% was observed. On the basis of the acidity change of the support and the structural modification underwent by the deposited palla…

inorganic chemicalsAqueous solutionChemistryProcess Chemistry and TechnologyInorganic chemistrychemistry.chemical_elementHeterogeneous catalysisCatalysisCatalysischemistry.chemical_compoundMCM-41ThiopheneMesoporous materialHydrodesulfurizationPalladiumApplied Catalysis A: General
researchProduct

First Synthesis of β-Keto Sulfoxides by a Palladium-Catalyzed Carbonylative Suzuki Reaction

2005

[reaction: see text] An unprecedented palladium-catalyzed three-component cross-coupling reaction between alpha-bromo sulfoxide, carbon monoxide, and aromatic boronic acids provides a new and efficient approach to the synthesis of beta-ketosulfoxides. The reaction takes place under mild conditions with a wide range of variously substituted aryl and heteroaryl boronic acids. The carbonylative cross-coupling reaction is strongly favored over competing direct cross-coupling and homocoupling processes, except with boronic acids carrying strong electron-withdrawing substituents.

inorganic chemicalsArylOrganic Chemistrychemistry.chemical_elementSulfoxideGeneral MedicineBiochemistryMedicinal chemistryCatalysischemistry.chemical_compoundchemistrySuzuki reactionOrganic chemistryPhysical and Theoretical ChemistryCarbonylationCarbon monoxidePalladiumOrganic Letters
researchProduct

Dynamic Refolding of Ion-Pair Catalysts in Response to Different Anions.

2019

Four distinct folding patterns were identified in two foldamer-type urea-thiourea catalysts bearing a basic dimethylamino unit by a combination of X-ray crystallography, solution NMR studies, and computational studies (DFT). These patterns are characterized by different intramolecular hydrogen bonding schemes that arise largely from different thiourea conformers. The free base forms of the catalysts are characterized by folds where the intramolecular hydrogen bonds between the urea and the thiourea units remain intact. In contrast, the catalytically relevant salt forms of the catalyst, where the catalyst forms an ion pair with the substrate or substrate analogues, appear in two entirely dif…

inorganic chemicalsBearing (mechanical)anionitcatalysis010405 organic chemistryChemistryorganic chemicalsOrganic Chemistryfolding anion bindingIon pairs010402 general chemistrykidetiede01 natural sciences0104 chemical sciencesCatalysislaw.inventionFolding (chemistry)X-rayCrystallographyconformational changelawkatalyysisolution structuresröntgenkristallografiaThe Journal of organic chemistry
researchProduct

The influence of cerium to urea preparation ratio of nanocrystalline ceria catalysts for the total oxidation of naphthalene

2008

The influence of cerium salt/urea ratio on the activity of nanocrystalline ceria catalysts prepared by homogeneous precipitation with urea for the complete oxidation of naphthalene has been evaluated. Ceria catalysts were prepared from five different cerium salt/urea ratios (2:1, 1:1, 1:2, 1:3 and 1:4). Catalyst characterization (by BET, XRD and TPR) only revealed subtle differences in the characteristics of these catalysts with cerium salt to urea ratio. However, Raman and scanning electron microscopy (SEM) results indicated differences in the oxygen defect concentration (FWHM of Raman band) and morphology of the catalysts with variation of the preparation ratio. Catalysts prepared with 2:…

inorganic chemicalsCerium oxideInorganic chemistrychemistry.chemical_elementGeneral ChemistryHeterogeneous catalysisCatalysisCatalysisCeriumchemistry.chemical_compoundsymbols.namesakechemistryCatalytic oxidationUreasymbolsRaman spectroscopyNaphthaleneCatalysis Today
researchProduct

Ni@Fe2O3 heterodimers: controlled synthesis and magnetically recyclable catalytic application for dehalogenation reactions

2012

Ni@Fe2O3 heterodimer nanoparticles (NPs) were synthesized by thermal decomposition of organometallic reactants. After functionalization, these Ni@Fe2O3 heterodimers became water soluble. The pristine heterodimeric NPs were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), Mossbauer spectroscopy and magnetic susceptibility measurements. A special advantage of the heterodimers lies in the fact that nanodomains of different composition can be used as catalysts for the removal of environmentally hazardous halogenated pollutants.

inorganic chemicalsChemical engineeringTransmission electron microscopyChemistryMössbauer spectroscopyThermal decompositionHalogenationOrganic chemistryNanoparticleSurface modificationGeneral Materials ScienceMagnetic susceptibilityCatalysisNanoscale
researchProduct

In-situ synthesis of hydrogen peroxide in tandem with selective oxidation reactions: A mini-review

2014

7 Figuras, 6 Tablas

inorganic chemicalsChemistry(all)Green chemistryTandem systemsSelective oxidationHydrogen peroxideCatalysisIn-situ synthesisCatalysis Today
researchProduct

Unprecedented Palladium-Catalyzed Cross-Coupling Reaction of α-Bromo Sulfoxides with Boronic Acids

2003

[reaction: see text] A new Suzuki-type palladium-catalyzed reaction of boronic acids with alpha-bromo sulfoxides has been developed using a protocol similar to the well-documented reaction of boronic acids with aryl halides. Both cross-coupling and homocoupling processes were observed. The best yields in cross-coupling products were obtained when the presence of oxygen was carefully excluded using degassed solvents. The oxidative addition palladium complex intermediate could be isolated and characterized by X-ray single-crystal diffraction.

inorganic chemicalsChemistryArylOrganic Chemistrychemistry.chemical_elementHalideGeneral MedicineBiochemistryOxidative additionOxygenCoupling reactionCatalysischemistry.chemical_compoundSuzuki reactionPolymer chemistryOrganic chemistryPhysical and Theoretical ChemistryPalladiumOrganic Letters
researchProduct

Fe-doped Beta zeolite from organotemplate-free synthesis for NH3-SCR of NOx

2016

Two types of Beta zeolites, one from organotemplate-free synthesis with a Si/Al ratio of 9 and the other from a commercial one with a Si/Al ratio of 19, were employed here to dope Fe for NH3-SCR of NOx. Fe-Beta (Si/Al = 9) exhibits much higher activity than Fe-Beta (Si/Al = 19), especially at low-temperature regions (<250 °C). In addition, it also exhibits better hydrothermal stability as compared with Fe-Beta (Si/Al = 19), which demonstrates that it is a promising SCR catalyst with good activity as well as hydrothermal stability. The correlation between the quantitative calculation of the content of isolated Fe3+ in Beta zeolites and the NO conversion rate at 150 °C shows a linear relation…

inorganic chemicalsChemistryInorganic chemistryNo conversion02 engineering and technology010402 general chemistry021001 nanoscience & nanotechnology01 natural sciencesCatalysisHydrothermal circulation0104 chemical sciencesCatalysisLinear relationshipFe doped0210 nano-technologyZeoliteBeta (finance)NOx
researchProduct

Pd and PdAu on mesoporous silica for methane oxidation: Effect of SO2

2007

Abstract Palladium and gold–palladium catalysts supported on mesoporous silica were prepared by incipient wetness impregnation. They were characterized by XPS, XRD, BET, and FTIR acidity measurements. The activity was tested in the oxidation of methane under lean conditions. The effect of adding SO 2 to the reactant mixture was investigated. Test reactions were consecutively performed to evaluate the thermal stability and poisoning reversibility. The palladium catalyst performed quite well in terms of the light-off temperature ( T 50 300  °C) and SO 2 tolerance. Moreover, the activity, which decreased after a night treatment in SO 2 at 350 °C, was completely recovered in subsequent cycles. …

inorganic chemicalsChemistryInorganic chemistrychemistry.chemical_elementMesoporous silicaHeterogeneous catalysisCatalysisCatalysisTransition metalAnaerobic oxidation of methaneThermal stabilityPhysical and Theoretical ChemistryIncipient wetness impregnationPalladiumJournal of Catalysis
researchProduct