Search results for "Catalyst"
showing 10 items of 516 documents
Carbon nanotube supported aluminum porphyrin-imidazolium bromide crosslinked copolymer
2022
The increased awareness of the catastrophic consequences caused by the accumulation of greenhouse gases into the atmosphere has generated a large mobilization aimed at CO2 mitigation. Herein, in the spirit of the transformation of a waste as CO2 into value added products, we propose an efficient preparation of two different hybrid systems based on aluminum chloride tetrastyrylporphyrin (TSP-Al-Cl) and 1,4-butanediyl-3,3′-bis-1-vinylimidazolium dibromide copolymerized in the presence (MWCNT-TSP-AlCl-imi) and in absence (TSP-AlCl-imi) of multi-walled carbon nanotubes (MWCNTs) for the CO2 utilization in the synthesis of cyclic carbonates. The so-prepared materials have been thoroughly characte…
Catalytic transesterification of Pistacia chinensis seed oil using HPW immobilized on magnetic composite graphene oxide/cellulose microspheres
2018
Abstract In the present study, magnetic composite graphene oxide/cellulose (GO/CM@Fe3O4) microspheres were prepared as support material, which are cost-efficient, non-toxic and environmental friendly. The microspheres with higher adsorption capacity were further modified using triethylene tetramine (TETA), and H3PW12O40 (HPW) was immobilized to form GO/CM-NH2@Fe3O4-HPW microspheres as heterogeneous catalyst for biodiesel production. The novel heterogeneous catalyst was characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), Brunauer-Emmett-Teller (BET) and X-ray diffractometry (XRD). For the first time, GO/CM-NH2@Fe3O4--HPW was applied in the tr…
Palladium-catalyzed formation and reactions of iodo- and bromosiloxane intermediates
2012
Polysiloxanes are useful materials because of their functionality, such as high thermal stability, electrical resistance, and hydrophobicity. In this regard, we studied palladium-catalyzed formation of iodo-and bromopolysiloxanes from two types of hydrosiloxanes, alpha,omega-dihydropoly(dimethylsiloxane) (1) and cyclotetra(hydromethylsiloxane) (2), and their reactions. Treatment of 1 with mixtures of cyclic ethers or lactones and MeI or allylBr in the presence of a catalytic amount of PdCl2 gave the corresponding alpha,omega-bis(haloalkoxy and haloalkanoyloxy) poly(dimethylsiloxane)s in good yields, via iodo-and bromopoly(dimethylsiloxane) intermediates. Transformation of the iodobutoxy-ter…
Preparation of photocatalysts by physical methodologies
2021
The synthesis of photocatalytic materials is an important task for obtaining better results in terms of activity and/or selectivity in photocatalysis. This chapter reports an overview of the main methodologies using physical techniques to obtain bulky, supported powders or films and coatings to be used as heterogeneous photocatalysts. The classical chemical methodologies for the preparation of photocatalytic materials are presented in the previous chapter, so the information presented here complements the aforementioned one. Materials scientists and engineers have made significant progresses in the improvement of methods of synthesis of nanomaterial solids by developing different apparatuse…
Conversion of furfural to 2-methylfuran over CuNi catalysts supported on biobased carbon foams
2021
In this study, carbon foams prepared from the by-products of the Finnish forest industry, such as tannic acid and pine bark extracts, were examined as supports for 5/5% Cu/Ni catalysts in the hydrotreatment of furfural to 2-methylfuran (MF). Experiments were conducted in a batch reactor at 503 K and 40 bar H2. Prior to metal impregnation, the carbon foam from tannic acid was activated with steam (S1), and the carbon foam from pine bark extracts was activated with ZnCl2 (S2) and washed with acids (HNO3 or H2SO4). For comparison, a spruce-based activated carbon (AC) catalyst and two commercial AC catalysts as references were investigated. Compressive strength of the foam S2 was 30 times great…
Covalently Supported Ionic Liquid Phases: An Advanced Class of Recyclable Catalytic Systems
2016
In this review, the most recent advances in the synthesis and catalytic applications of covalently supported ionic liquid (IL) phases will be discussed. This class of recyclable catalytic materials is based on the covalent attachment of several types of ammonium salts, usually imidazolium, but also thiazolium, triazolium, and pyrrolidinium salts, on the surface of different supports, for example, silica, periodic mesoporous organosilica, polystyrene, magnetic-based materials, carbon nanotubes (NTs), halloysite NTs, polyhedral oligomeric silsesquioxane (POSS), and fullerenes. Moreover, poly(ionic liquid) materials, in which the IL-based structure also acts as a support, will be considered. T…
Porous thin films obtained by DLI-CVD as mu-PEMFC catalysts to replace platinum
2016
This work is focused on development of growth protocols by direct liquid injection chemical vapor deposition (DLI-CVD) of catalytic porous films which could be used in proton exchange membrane fuel cells (PEMFC). The aim of this work was to reduce or even proscribe platinum in catalysts having large specific surface area i.e. being very porous. Besides, the aim is also to use mainly low cost precursors.Cerium oxide, which is a material widely used as catalyst, has been chosen to partially substitute platinum. Porous CeO2 layers were obtained by the optimization of processing parameters such as deposition temperature or precursors flow rates. Controlled platinum doping of cerium oxide surfac…
Oxidative dehydrogenation of ethane over NiO–CeO2 mixed oxides catalysts
2012
[EN] In this paper we present the synthesis, characterization and catalytic behaviour in the oxidative dehydrogenation of ethane of NiO-CeO2 mixed oxides. The addition of cerium oxide to NiO strongly modifies its catalytic performance, although the changes in the catalytic behaviour depend on the catalyst composition. The incorporation of low amounts of cerium oxide to NiO multiplies the productivity to ethylene in the oxidative dehydrogenation of ethane by a factor of ca. 7, which is the result of an increase in both catalytic activity and selectivity to ethylene. The enhanced activity has been related to the remarkable increase of the surface area of catalyst and the low crystal sizes of …
Electrosynthesis of Ce–Co Mixed Oxide Nanotubes with High Aspect Ratio and Tunable Composition
2008
Cerium oxide and cobalt oxides have attracted the interest of several researchers due to their potential application in several technological fields electrochromism, lithium batteries, catalysis, etc.. Ceria has been used as a promoter in the so-called “three-way catalyst” for the control of toxic emission from automobile exhaust. The promotion consists of the enhancement of the noble metal dispersion, as well as stabilization of the supporting medium toward thermal sintering. 1,2 A direct catalytic effect of CeO2 in chemical processes such as water–gas shift reaction or NOx decomposition has been also evidenced. 3,4
Pt–CeO thin film catalysts for PEMFC
2015
Abstract Platinum is the mostly used element in catalysts for fuel cell technology, but its high price limits large-scale applications. Platinum doped cerium oxide represents an alternative solution due to very low loading, typically few micrograms per 1 cm2, at the proton exchange membrane fuel cell (PEMFC) anode. High efficiency is achieved by using magnetron sputtering deposition of cerium oxide and Pt of 30 nm thick nanoporous films on large surface carbon nanoparticle substrates. Thin film techniques permits to grow the catalyst film characterized by highly dispersed platinum, mostly in ionic Pt2+ state. Such dispersed Pt species show high activity and stability. These new materials ma…