Search results for "Cathode"
showing 10 items of 296 documents
Ionic liquid modified zinc oxide injection layer for inverted organic light-emitting diodes
2013
Abstract We have demonstrated a novel approach for fabricating efficient hybrid organic–inorganic light emitting diodes (HyLEDs) by introducing dopants into solutions processable metal oxides as an interfacial layer. The doped ZnO is prepared by adding ionic liquid (IL) to a precursor solution for the ZnO. In this way a heavily doped ZnO:ILs cathode was obtained that enhances the electron injection properties and assures a good wetting of the organic active materials.
Electronic structure and thermodynamic stability ofLaMnO3andLa1−xSrxMnO3(001) surfaces:Ab initiocalculations
2008
We present the results of ab initio hybrid density-functional calculations of the atomic and the electronic structures of ${\text{LaMnO}}_{3}$ (LMO) and ${\text{La}}_{1\ensuremath{-}{x}_{b}}{\text{Sr}}_{{x}_{b}}{\text{MnO}}_{3}$ (001) surfaces. The total energies obtained from these calculations were used to analyze thermodynamic stability of the surfaces. We predict Sr and O vacancy segregation to the surface to occur with similar energies ($\ensuremath{\sim}0.5\text{ }\text{eV}$ per defect). In pure LMO only ${\text{MnO}}_{2}$ termination is thermodynamically favorable under typical operational conditions of a cathode in solid oxide fuel cells, whereas Sr doping makes La(Sr)O termination …
Reduction of oxygen to H2O2 at carbon felt cathode in undivided cells. Effect of the ratio between the anode and the cathode surfaces and of other op…
2019
Abstract In the last years, the electrochemical conversion of oxygen to hydrogen peroxide at carbon felt has been largely studied in order to define a new route for the production of H2O2 and to optimize the electro-Fenton process, which is based on the cathodic generation of H2O2. In particular, many studies regarding electro-Fenton process were carried out in undivided cells in order to avoid the costs of the separator and to reduce the cell potentials. Hence, in order to optimize the cathodic conversion of oxygen to H2O2 in undivided cells, the effect of many parameters linked to the anodic process were here evaluated. In particular, it was demonstrated that the performances of the proce…
Electrochemical conversion of CO2 to formic acid using a Sn based electrode: A critical review on the state-of-the-art technologies and their potenti…
2021
Abstract The electrochemical conversion of carbon dioxide is considered one of the most promising strategies to convert waste-CO2 into value-added chemicals. This review focuses on the synthesis of formic acid/formate in aqueous electrolyte using Sn-based cathodes; this material is considered relatively cheap and shows promising results in terms of faradaic efficiency. In order to be suitable at an industrial scale, the process should present simultaneously high current densities, faradaic efficiencies close to 100%, high concentrations of formic acid and long-term stability. Analysing the main results reported in the literature, it was observed that to date further studies are necessary to…
Electrochemical conversion of CO2 to HCOOH at tin cathode in a pressurized undivided filter-press cell
2018
Abstract The electrochemical reduction of carbon dioxide to formic acid was performed for the first time in a pressurized filter-press cell with a continuous recirculation of the electrolytic solution (0.9 L) at a tin cathode. It was shown that the performances of the system are comparable or slightly better than that of a batch system with a smaller volume (0.05 L). The selection of proper values of both current density and CO2 pressure allowed to achieve quite high values of faradaic efficiencies. Long-time electrolyses have shown that the system is stable and that it can allow to generate quite high concentrations of HCOOH (about 0.4 M).
A high pressure gas target system for the determination of absolute electron scattering cross sections
1979
A high pressure gas target system is described, which is suitable for measurements of absolute electron scattering cross sections and for high resolution electron scattering experiments at medium energies. Details of design and construction are given and special investigations are discussed with respect to straggling effects that take place in the walls and in the gases, and to changes in the gas density, due to heating by the electron beam.
White hybrid organic-inorganic light-emitting diode using ZnO as the air-stable cathode
2009
An efficient white light emitting hybrid organic−inorganic device utilizing air-stable metal oxides as anode and cathode and a polyfluorene mixed with a phosphorescent iridium complex as the emitting material is presented.
Exploring High-Energy Li-I(r)on Batteries and Capacitors with Conversion-Type Fe3O4-rGO as the Negative Electrode
2017
We report a microwave-assisted solvothermal process for the preparation of magnetite (Fe3O4, ca. 5 nm)-anchored reduced graphene oxide (rGO). It has been examined as a prospective conversion-type negative electrode for multiple energy storage applications, such as Li-ion batteries (LIBs) and Li-ion capacitors (LICs). A LiFePO4/Fe3O4-rGO cell is constructed and capable of delivering an energy density of approximately 139 Wh kg−1 with a notable cyclability (ca. 76 %) after 500 cycles. Prior to the fabrication of a LIB, the Fe3O4-rGO is electrochemically pretreated to eliminate the irreversible capacity loss. In addition to the LIB, a high-energy LIC is also fabricated by using the pre-lithiat…
Evaluation of a new Cr-free alloy as interconnect material for hydrogen production by high temperature water vapour electrolysis: Study in cathode at…
2012
International audience; For economic and ecological reasons, hydrogen is considered as a major energetic vector for the future. Hydrogen production via high temperature water vapour electrolysis (HTE) is a promising technology. A major technical difficulty related to high temperature water vapour electrolysis is the development of interconnects working efficiently for a long period. Working temperature of 800 degrees C enables the use of metallic materials as interconnects. High temperature corrosion behaviour and electrical conductivity of a new Cr-free Fe-Ni-Co alloy were tested in cathode atmosphere (H-2/H2O) at 800 degrees C. The alloy exhibits a poor oxidation resistance but an excelle…
Effect of the anode composition on the performance of reversible chlor-alkali electro-absorption cells
2020
Abstract In this work, the performances of a reversible electrochemical cell for the storage of energy using the chloralkaline process was investigated. The cell operates at room temperature with liquid electrolytes in both compartments. In the electrolyzer mode, the cell transforms a sodium chloride solution into hydrogen and chlorine, which is then disproportionated to form hypochlorous acid and hypochlorite. In fuel cell operation mode, the cell becomes an electro-absorber to oxidize hydrogen at the anode while reducing hypochlorous acid at the cathode. Because of the low solubility of hydrogen, a special mechanical device is used to produce hydrogen microbubbles in the anodic compartmen…