Search results for "Cements"
showing 10 items of 136 documents
Effect of water contamination on the shear bond strength of five orthodontic adhesives
2010
Objectives: To evaluate the shear bond strength and site of failure of brackets bonded to dry and wet enamel. Study design: 50 teeth were divided into ten groups of 5 teeth each (10 surfaces). In half the groups enamel was kept dry before bonding, and in the other half distilled water was applied to wet the surface after etching. The following groups were established: 1)Acid/Transbond-XT (dry/wet) XT; 2) Transbond Plus Self Etching Primer (TSEP)/Transbond-XT paste (dry/wet); 3) Concise (dry), Transbond MIP/Concise (wet), 4) FujiOrtho-LC (dry/ wet); 5) SmartBond (dry/wet). Brackets were bonded to both buccal and lingual surfaces. Specimens were stored in distilled water (24 hours at 37ºC) an…
Light transmittance of zirconia as a function of thickness and microhardness of resin cements under different thicknesses of zirconia
2012
Objective: The objective of this study was to compare microhardness of resin cements under different thicknesses of zirconia and the light transmittance of zirconia as a function of thickness. Study design: A total of 126 disc-shaped specimens (2 mm in height and 5 mm in diameter) were prepared from dual-cured resin cements (RelyX Unicem, Panavia F and Clearfil SA cement). Photoactivation was performed by using quartz tungsten halogen and light emitting diode light curing units under different thicknesses of zirconia. Then the specimens (n=7/per group) were stored in dry conditions in total dark at 37°C for 24 h. The Vicker's hardness test was performed on the resin cement layer with a micr…
Microhardness of different resin cement shades inside the root canal
2012
Objectives: To compare microhardness along the root canal post space of two resin cements in different shades and a dual-cure resin core material. Study Design: Root canals of 21 bovine incisors were prepared for post space. Translucent posts (X•Post, Dentsply DeTrey) were luted using one the following resin luting agent: Calibra (Dentsply DeTrey) in Translucent, Medium and Opaque shades, RelyX Unicem (3M ESPE) in Translucent, A2 and A3 shades and the dual-cure resin core material Core•X flow. All materials were applied according to manufacturers’ instructions and were all photopolymerized (Bluephase LED unit, Ivoclar Vivadent, 40s). After 24 hours, roots were transversally cut into 9 slice…
Push-out bond strength of quartz fiber posts to root canal dentin using total-etch and self-adhesive resin cements
2011
Objectives: Several adhesive systems are available for cementation of fibre posts into the root canal. The aim of the present study was to investigate the push-out bond strengths of quartz fibre posts to root dentin with the use of different total-etch and self-adhesive resin cements. Study Design: Ninety single-rooted human premolars were endodontically treated and standardized post-spaces were prepared. Fibre posts were cemented with different luting agents: total-etch (Nexus NX3, Duo-Link, and RelyX ARC) and self-adhesive resin cements (Maxcem Elite, BisCem, and RelyX Unicem). Three post/dentin sections (coronal, middle and apical) were obtained from each specimen, and push-out bond stre…
A zinc-doped endodontic cement facilitates functional mineralization and stress dissipation at the dentin surface
2018
Objective: The purpose of this study was to evaluate nanohardness and viscoelastic behavior of dentin surfaces treated with two canal sealer cements for dentin remineralization. Material and Methods: Dentin surfaces were subjected to: i) 37% phosphoric acid (PA) or ii) 0.5 M ethylenediaminetetraacetic acid (EDTA) conditioning prior to the application of two experimental hydroxyapatite-based cements, containing sodium hydroxide (calcypatite) or zinc oxide (oxipatite), respectively. Samples were stored in simulated body fluid during 24 h or 21 d. The intertubular and peritubular dentin were evaluated using a nanoindenter to assess nanohardness (Hi). The load/displacement responses were used f…
Ultra-structure characterization of self-etching treated cementum surfaces
2010
Objectives: to evaluate the effect of different conditioning treatments on surface roughness and topography of dental cementum. Study Design: Extracted human canines were used for the present study. The mesial surface from the cervical third of the roots were ground flat with wet 600-grit silicon carbide paper. They were polished (up to 1/4 µm diamond paste) and treated as follows: 1) No treatment, 2) 35% H3PO4 during 15 s, 3) Clearfil SE Bond primer (SEB), 4) One-Up Bond F (OUB). The adhesive systems were applied following manufacturer?s instructions. SEB primer and OUB were removed from surfaces by washing and ultrasonic agitation with ascending ethanol solutions. Digital images of treate…
Vertical misfit of laser-sintered and vacuum-cast implant-supported crown copings luted with definitive and temporary luting agents
2012
Objectives. This study aimed to evaluate the vertical discrepancy of implant-supported crown structures constructed with vacuum-casting and Direct Metal Laser Sintering (DMLS) technologies, and luted with different cement types. Study Design. Crown copings were fabricated using: (1) direct metal laser sintered Co-Cr (LS); (2) vacuum-cast Co-Cr (CC); and (3) vacuum-cast Ti (CT). Frameworks were luted onto machined implant abutments under constant seating pressure. Each alloy group was randomly divided into 5 subgroups (n = 10 each) according to the cement system utilized: Subgroup 1 (KC) used resin-modified glass-ionomer Ketac Cem Plus; Subgroup 2 (PF) used Panavia F 2.0 dual-cure resin ceme…
Approximate Solution on Large Deflection of Glass Panels Subjected to Uniform Pressure
2015
The estimation of the deflection of glass panels under wind pressure is important in designing external facades of buildings. A direct method to compute the large deflections of glass panels under uniform loads such as wind pressure is presented. The model allows for derivation of the load-deflection response of square or rectangular multilayered glass panels subject to uniform loads. The boundary conditions examined are those of four-point discontinuous supports or continuous supports along the four sides. With some assumptions on bending and membrane action of flat glasses, simple analytical expressions were derived from the elastic theory. Viscoelastic effects for multilayered glass pane…
Finite Displacements and Corrotational Interfaces: Consistent formulation and Symmetry of the Stiffness Matrix
2017
Mechanical interfaces are theoretical and computational tools able to properly reproduce then progressive delamination of composite structures. Scientific literature is rich of interface models, mostly developed in small displacements, whereas a few of them assess the problem in a geometrically nonlinear setting. In the present paper interface formulation is rigorously developed in a geometrically nonlinear setting, and the relevant interface constitutive relations are defined in the local reference with normal and tangential axes to the middle surface in the current configuration. The interface is defined as a zero thickness layer with tractions acting between the two connected surfaces. M…
Journalistic Passion as Commodity: A Managerial Perspective
2021
This article focuses on the role of passion in news journalism from a managerial perspective. The analysis is based on a data set of 40,621 web-based job advertisements obtained from Journalismjobs.com, from the year 2002 to 2017. The quantitative analysis shows that passion has been on the rise as only 4% of the job advertisements in 2002 asked for “passionate” journalists, increasing to almost 16% in 2013. The authors also performed a qualitative analysis of job advertisements mentioning the word “passion” for the periods 2002–2003 and 2017. These advertisements express a shift from a normative role of journalists to journalism as an activity: when mentioned …