Search results for "Characterization"
showing 10 items of 1054 documents
Monitoring WWTP performance using size-exclusion chromatography with simultaneous UV and fluorescence detection to track recalcitrant wastewater frac…
2018
Abstract A trial monitoring of a typical full-scale municipal WWTP in Central Finland was aimed to explore applicability of high performance liquid chromatography – size exclusion chromatography (HPSEC) with simultaneous UV and fluorescence detection as a tool for advanced routine monitoring of wastewater treatment. High, intermediate, and low molecular weight (MW) fractions of untreated wastewater (influent) and treated wastewater (secondary effluent) were characterized in terms of UV absorbance at 254 nm (UVA254) and specific fluorescence representing tyrosine-like, tryptophan-like, and humic/fulvic-like compounds. The activated sludge treatment removed 97 ± 1% of BOD, 93 ± 2% of COD, 71 …
A survey of photocatalytic materials for environmental remediation
2012
Abstract Heterogeneous photocatalysis is an advanced oxidation process which has been the subject of a huge amount of studies related to air cleaning and water purification. All these processes have been carried out mainly by using TiO 2 -based materials as the photocatalysts and ca. 75% of the articles published in the last 3 years is related to them. This review illustrates the efforts in the search of alternative photocatalysts that are not based on TiO 2 , with some exceptions concerning particularly innovative modifications as nanoassembled TiO 2 or TiO 2 composites with active carbon, graphite and fullerene. Papers reporting preparation, characterization and testing of binary, ternary…
Analysis of the chemical and microstructural modifications effects on the hydro-mechanical behaviour of a lime-treated clay
2019
The paper presents the results of a characterization of kinetic characteristics of pozzolanic reaction with the aim to investigate the time-dependent modification of clay properties as a consequence of mixing with lime. Results of chemical analyses are in agreement with the increase of mechanical properties and with the observed microstructure modifications up to one year of curing time. The rate of development of pozzolanic reactions seems to be almost constant while the time required for their completion is dependent on the lime content. Pozzolanic products are responsible for the time reduction of swelling strain upon saturation as well as for the increases of yielding stress, stiffness …
Characterization of Hardwood Soda-AQ Lignins Precipitated from Black Liquor through Selective Acidification
2016
In the development of integrated biorefinery process alternatives to produce value-added by-products, various black liquors from sulfur-free pulping processes offer potential feedstocks for recovering their main chemical constituents, lignin and aliphatic carboxylic acids. In this study, lignin fractions were obtained from silver birch (Betula pendula) soda-anthraquinone black liquor by carbonation (pH to about 8.5) or by acidification (pH to about 2) with H2SO4 after carbonation or directly. These fractions were characterized by Fourier transform infrared (FTIR), ultraviolet (UV), energy dispersive X-ray fluorescence (ED XRF), and 13C nuclear magnetic resonance (13C NMR) spectroscopy. In a…
Design, characterization and comparison of materials based on β and γ cyclodextrin covalently connected to microporous silica for environmental analy…
2018
Abstract Determination of organic pollutants in environmental samples presents great difficulties due to the lack of sensitivity and selectivity in many of the existing analytical methods. In this work, the efficiency of materials based on silica structures containing bounded γ-cyclodextrin has been evaluated to determinate phenolic compounds and polycyclic aromatic hydrocarbons in air and water samples, respectively, in comparison with materials made of β-cyclodextrin. According to the results obtained for the material characterization, the new γ-cyclodextrin solid phase does not apparently present any porosity when used in air samples, but it has been shown to work efficiently for the pre…
Current European approaches in highway runoff management: A review
2022
Highway runoff is one of the most significant non-point sources of pollution for the terrestrial and aquatic environment with biological, physical, and chemical effects. Considering local characteristics, treatment practices, and determining factors are essential for highway runoff management. The aim of this paper is to survey the review of highway runoff management in Europe with emphasis on runoff characterization, treatment, and modeling approaches and identifying possible knowledge gaps exists based on our review. The results showed that highway runoff has spatiotemporal variation, which is the main factor in the regional selection of the best management practice (BMP). Also, recent st…
Effect of the cerium loading on the HMS structure. Preparation, characterization and catalytic properties
2013
Abstract Ce–HMS mesoporous materials were prepared by incipient wetness method starting from HMS synthesized in acid condition. The effect of cerium quantity, in the range of Ce/Si atomic ratio 0.02–0.3, on its structure and properties was investigated. Results showed that the HMS hexagonal structure was maintained after the cerium adding. Furthermore, the surface area and the pore volume were reduced. The presence of the cerianite nanoparticles located within the HMS channels up to 0.05, thus covering the HMS surface at higher Ce/Si atomic ratio, was observed. The catalytic performances of the materials were tested in ethanol partial oxidation reaction.
Characterization of ethylene oxide/tert-octylphenol condensates by ultraviolet and infrared spectrometry
1986
Abstract The average degree of condensation of ethylene oxide/tert-octylphenol condensate surfactants can be estimated rapidly by u.v. and i.r. spectrometry. The u.v. method is based on evaluating the specific absorptivity, a , at 275 nm in aqueous ethanol (60:40 v/v), and inserting this value in equations obtained from previously characterized samples, relating a to the average properties to be determined. Infrared spectrometry is applied similarly; the average properties to be determined are related to the ratio between the band heights at 960 and 840 cm −1 . The relative standard deviations ( n = 10) obtained for a sample of Triton X-100 were 2% by u.v. spectrometry, and 3% by i.r. spect…
The use of mathematical models in the characterization of ethylene oxide condensate Surfactants by infrared and ultraviolet spectroscopy
1986
A topological treatment of the surfactant molecules (DARC system) and a group contribution model were applied to study the correlation between structures of ethylene oxide condensates with nonylsphenol and tert-octylphenol and their spectral characteristics such as extinction coefficient of the molecular absortion band. Using the experimental values of the spectral characteristics of an unknown smaple of an ethylene oxide condensate surfactant and the information parameters, previously determined by the mathematical treatment of a key population, it is possible to obtain their average condensation degree.
The nickel-support interaction as determining factor of the selectivity to ethylene in the oxidative dehydrogenation of ethane over nickel oxide/alum…
2021
[EN] Nickel oxides supported on gamma-alumina (Ni-loading from 5 to 30 wt% NiO) have been synthesized and tested in the oxidative dehydrogenation (ODH) of ethane in order to determine the importance of the NiO-support interaction. The best performance was achieved by the catalyst with 15 wt% NiO; higher NiO-loadings lead to the formation of unselective bulk-like NiO and lower Ni-loadings present high proportion of free alumina surface sites. The presence of oxalic acid and/or niobium in the synthesis gel resulted in the formation of NiO particles with similar size, but higher crystallinity and reducibility than the standard 15 wt% NiO catalyst. The obtained results have revealed that, in ad…