Search results for "Chip"
showing 10 items of 386 documents
Electroplated Indium Bumps as Thermal and Electrical Connections of NTD-Ge Sensors for the Fabrication of Microcalorimeter Arrays
2012
We are developing a method to build arrays of Ge-based microcalorimeters for soft X-rays detection using micro-photolithographic techniques. A key element of the process is the electrical and thermal connection between the germanium sensors and the interconnection electrical tracks, that lay on a substrate acting as mechanical support and thermal sink. The geometry of the sensors, that have a square base truncated pyramid shape, makes feasible a connection through indium soldering. We describe a technique, based on microlithography and electroplating, adopted to grow indium bumps of a few tens of square microns of area and several microns high on top of the contact pads patterned on the sub…
NoC based virtualized FPGA as cloud Services
2016
International audience; Web-based applications are increasingly demanding many computationally intensive services. On the other hand, FPGA-based hardware accelerators(HwAcc) provide good performance in accelerating computationally intensive applications. In addition, some FPGAs support a dynamic partial reconfig-uration (DPR) techniques to virtualize and share the FPGA underlying hardware resources in time multiplexing during run-time to save resource and power consumption. Integrating FPGA in a cloud environment is an indispensable way to improve efficiency and provide acceleration services to demanding users. More importantly, in recent years it was proved that FPGA resources deployed in …
Influence of cutting process mechanics on surface integrity and electrochemical behavior of OFHC copper
2014
The authors gratefully acknowledge the support received from IC ARTS and CEA Valduc; International audience; Superfinishing machining has a particular impact on cutting mechanics, surface integrity and local electrochemical behavior. In fact, material removal during this process induces geometrical, mechanical and micro-structural modifications in the machined surface and sub-surface. However, a conventional 3D cutting process is still complex to study in terms of analytical/numerical modeling and experimental process monitoring. So, researchers are wondering if a less intricate configuration such as orthogonal cutting would be able to provide information about surface integrity as close as…
New technologies getting informations on repartition, orientation and identification of biomolecules on SPR chip
2008
We present herein an original approach, consisting to lead in parallel a global analysis (SPR) and nanoscale characterizations (AFM, mass spectrometry, TOF-SIMS) of bio-molecules on the biochip surface. The questions we want to answer concern especially the organization, orientation and identification of immobilized and captured biomolecules. In order to characterize the sensing layer in terms of molecular structure and orientation, we engaged a SPR-TOF SIMS first set of experiments (collaboration: Pr Aoyagi, Japan). Our results demonstrated that analysis of orientation of the immobilized cytochrome b5 is possible (ref2&3) and help to optimize and develop our sensing layer. We also recently…
Technological innovation around protein and cell biochip for diagnosis: a translational research from nanoworld to patient
2009
International audience; A great challenge in biosensors and diagnosis devices relies on the way to reconstitute relevant biological mechanisms on surface of the biochips and which analytical tools are convenient to provide accurate and rapid information on the structures and function of molecules attached to this surface. A better control in the realization of biochips can be obtained in combining different complementary approaches while always keeping in mind the biological key point. Researches in CLIPP are focused towards this objective. Conception, realization and characterization of protein and cell chips are presented. We detail different strategies of materials engineering1,2,3, chem…
Optimisation des techniques de chimiothérapie intracavitaire
2013
Introduction. In order to achieve a good effect, chemotherapy drugs need to penetrate into the peritoneal (HIPEC) or pleural tissue. Hyperthermia and high-pressure may enhance this penetration. The aim of this study was to evaluate their peritoneal effect and to establish the best technique to it. A feasibility study of an intrapleural high-pressure was an essential step to export these effects to the thoracic space. Methods. Four groups of pigs underwent an open HIPEC with a constant concentration (150 mg/l) of oxaliplatin during 30 minutes either in normothermia, or in hyperthermia (42-43°C); and either with atmospheric pressure or with high-pressure (25 cmH2O). Two more groups underwent …
On chip shapeable optical tweezers
2013
International audience; Particles manipulation with optical forces is known as optical tweezing. While tweezing in free space with laser beams was established in the 1980s, integrating the optical tweezers on a chip is a challenging task. Recent experiments with plasmonic nanoantennas, microring resonators, and photonic crystal nanocavities have demonstrated optical trapping. However, the optical field of a tweezer made of a single microscopic resonator cannot be shaped. So far, this prevents from optically driven micromanipulations. Here we propose an alternative approach where the shape of the optical trap can be tuned by the wavelength in coupled nanobeam cavities. Using these shapeable …
Détection automatique de chutes de personnes basée sur des descripteurs spatio-temporels : définition de la méthode, évaluation des performances et i…
2013
We propose a supervised approach to detect falls in home environment adapted to location andpoint of view changes. First, we maid publicly available a realistic dataset, acquired in four differentlocations, containing a large number of manual annotation suitable for methods comparison. We alsodefined a new metric, adapted to real-time tasks, allowing to evaluate fall detection performance ina continuous video stream. Then, we build the initial spatio-temporal descriptor named STHF usingseveral combinations of transformations of geometrical features and an automatically optimised setof spatio-temporal descriptors thanks to an automatic feature selection step. We propose a realisticand pragma…
Biochar from Wood Chips and Corn Cobs for Adsorption of Thioflavin T and Erythrosine B.
2022
Biochars from wood chips (WC) and corn cobs (CC) were prepared by slow pyrolysis and used for sorption separation of erythrosine B (EB) and thioflavin T (TT) in batch experiments. Biochar-based adsorbents were extensively characterized using FTIR, XRD, SEM-EDX, and XPS techniques. The kinetics studies revealed that adsorption on external surfaces was the rate-limiting step for the removal of TT on both WC and CC biochar, while intraparticle diffusion was the rate-limiting step for the adsorption of EB. Maximal experimental adsorption capacities Qmaxexp of TT reached 182 ± 5 (WC) and 45 ± 2 mg g−1 (CC), and EB 12.7 ± 0.9 (WC) and 1.5 ± 0.4 mg g−1 (CC),…
On the occurrence of Eudiaptomus gracilis (G.O. Sars, 1863) (Copepoda: Diaptomidae) in Madeira (Portugal)
2020
Calanoid copepods belonging to the diaptomid genus Eudiaptomus Kiefer, 1932 were collected in an artificial water body on the island of Madeira, Portugal. The morphological and molecular identification of the collected specimens unequivocally proved that they belong to the allochthonous species Eudiaptomus gracilis (G. O. Sars, 1863), possibly unwarily introduced along with fish stockings or ornamental aquatic plants. In the sampled site, the species co-occurred with the non-native cyclopoid copepod Acanthocyclops americanus (Marsh, 1893) and some anomopod species. This is the first record of the species for Portugal and the whole Macaronesia, whereas the possible presence of E. gracilis in…