Search results for "Composite"
showing 10 items of 4584 documents
Multiwalled carbon nanotube reinforced polymer composites
2008
Due to their high stiffness and strength, as well as their electrical conductivity, carbon nanotubes are under intense investigation as fillers in polymer matrix composites. The nature of the carbon nanotube/polymer bonding and the curvature of the carbon nanotubes within the polymer have arisen as particular factors in the efficacy of the carbon nanotubes to actually provide any enhanced stiffness or strength to the composite. Here the effects of carbon nanotube curvature and interface interaction with the matrix on the composite stiffness are investigated using micromechanical analysis. In particular, the effects of poor bonding and thus poor shear lag load transfer to the carbon nanotube…
Depletion of carbon nanotube depositions and tube realignment in the spreading of sessile drops
2015
Abstract We studied spreading of drops of water and dilute alcohol on multiwall carbon nanotube (MWNT) depositions. These deposits consisted of individual arc-discharge synthesized MWNTs and irregular amorphous carbon nanoparticles on hydrophilically rendered silicon substrates. The mobile circular contact line of a spreading drop created an annular shape on the deposit, where some of the MWNTs and the amorphous nanoparticles in particular were largely depleted. The effect was strongly dependent on the hydrophilicity of the substrate. Most of the MWNTs were not only left within the annuli, but were also apparently reoriented by their interaction with the passing contact line. Our results im…
Carbon nanotubes as high-pressure cylinders and nanoextruders.
2006
Closed-shell carbon nanostructures, such as carbon onions, have been shown to act as self-contracting high-pressure cells under electron irradiation. We report that controlled irradiation of multiwalled carbon nanotubes can cause large pressure buildup within the nanotube cores that can plastically deform, extrude, and break solid materials that are encapsulated inside the core. We further showed by atomistic simulations that the internal pressure inside nanotubes can reach values higher than 40 gigapascals. Nanotubes can thus be used as robust nanoscale jigs for extruding and deforming hard nanomaterials and for modifying their properties, as well as templates for the study of individual n…
On the Role of Extensional Flow in Morphology and Property Modifications of MWCNT/Polyamide-Based Fibers
2011
Unfilled and MWCNT-filled PA fibers are prepared and the effect of the extensional flow on their mechanical performance and morphological variations is investigated. Morphological analyses using SEM, TEM, and SAXS suggest a stronger orientation of the MWCNTs along the fiber direction with increasing extensional flow. A particular MWCNT bundle formation in the PA drawn nanocomposite fibers is observed for the first time, and a pull-out of the central nanotube in some bundles is noted. The maintenance of the "shish-kebab" structure upon extensional flow is responsible for the mechanical improvements and dimensional stability in MWCNT-filled PA fibers.
High Thermoelectric Power Factor Organic Thin Films through Combination of Nanotube Multilayer Assembly and Electrochemical Polymerization
2017
In an effort to produce effective thermoelectric nanocomposites with multiwalled carbon nanotubes (MWCNT), layer-by-layer assembly was combined with electrochemical polymerization to create synergy that would produce a high power factor. Nanolayers of MWCNT stabilized with poly(diallyldimethylammonium chloride) or sodium deoxycholate were alternately deposited from water. Poly(3,4-ethylene dioxythiophene) [PEDOT] was then synthesized electrochemically by using this MWCNT-based multilayer thin film as the working electrode. Microscopic images show a homogeneous distribution of PEDOT around the MWCNT. The electrical resistance, conductivity (σ) and Seebeck coefficient (S) were measured before…
Keratin/alginate hybrid hydrogels filled with halloysite clay nanotubes for protective treatment of human hair
2022
Keratin/alginate hydrogels filled with halloysite nanotubes (HNTs) have been tested for the protective coating of human hair. Preliminary studies have been conducted on the aqueous colloidal systems and the corresponding hydrogels obtained by using Ca2+ ions as crosslinkers. Firstly, we have investigated the colloidal properties of keratin/alginate/HNTs dispersions to explore the specific interactions occurring between the biomacromolecules and the nanotubes. Then, the rheological properties of the hydrogels have been studied highlighting that the keratin/alginate interactions and the subsequent addition of HNTs facilitate the biopolymer crosslinking. Finally, human hair samples have been t…
Determination of the electroactive area of graphite+polyethylene composite electrodes. Uncompensated resistance effects and convolution analysis of c…
1998
In this work, it is shown how the convolution analysis of chronoamperograms permits the observation of the uncompensated resistance and the natural convection effects on the electrochemical response of potassium ferrocyanide. The uncompensated resistance causes the current intensity to follow the Cottrell equation only after a certain critical time. The convolution of chronoamperograms worked out at different integration times shows a maximum when this time is long enough. The classical diffusion equations cannot explain this phenomenon themselves. The development of this maximum associated with the natural convection is discussed. If both these factors, the ohmic drop and the natural conve…
The role of oxidative stress in pro-inflammatory activation of human endothelial cells on Ti6Al4V alloy
2013
Inflammation is an important step in the early phase of tissue regeneration around an implanted metallic orthopaedic device. However, prolonged inflammation, which can be induced by metallic corrosion products, can lead to aseptic loosening and implant failure. Cells in peri-implant tissue as well as metal corrosion can induce reactive oxygen species (ROS) formation, thus contributing to an oxidative microenvironment around an implant. Understanding cellular reactions to implant-induced oxidative stress and inflammatory activation is important to help prevent an adverse response to metallic materials. In an earlier study we have shown that endothelial cells grown on Ti6Al4V alloy are subjec…
Characterization of Nd-MCM41 obtained by impregnation
2008
Abstract Silica mesoporous molecular sieves (MCM-41), prepared by using micelles as template, were functionalized by means of incipient wetness method. Evidence for the neodymium presence in the silica matrix was obtained by means of EDX. SEM micrographs showed that impregnation does not change significantly MCM-41 morphology. The maintenance of the hexagonal structure was confirmed by XRD pattern analysis. However, the observed loss of long-range ordering, the cell parameter increase and the surface area decrease, observed by gas adsorption technique, were attributed to the introduction of neodymium oxide inside the MCM-41 mesochannels. By FT-IR and Raman spectra it was found that the main…
Reaction Sequence in the Preparation of NiAl2O4 Spinel-Mullite Composites by Sol-Gel
2005
NiAl 2 O 4 spinel-mullite composites were prepared by simultaneous replacement of Al by Ti and/or Ni in 3:2 stoichiometric mullite. Specimens having nominal compositions 3(Al 2-2x Ni x Ti x O 3 ).2SiO 2 (x = 0, 0.025, 0.05, 0.2) and 3(Al 2-x M x O 3) .2SiO 2 (M = Ni 2+ or Ti 4+ and x = 0.05) were synthesized by sol-gel techniques, which provide homogeneous gels in the SiO 2 -Al 2 O 3 system. Gel structures investigated by infrared (IR) spectroscopy revealed the formation of Al-O-Si bonds in dried gels. The reaction sequence of gel-derived glasses, previously obtained by preheating gels at 750°C for 3 h, was evaluated by X-ray powder diffraction (XRD) and ultraviolet-visible (UV-vis) spectro…