Search results for "Composite"
showing 10 items of 4584 documents
Quasi-Ductile Behaviour of Carbon-Reinforced Carbon
1991
Firstly a brief review of the problem of a “ductilization” of ceramic materials by endless-fiber reinforcement is given. The problems, especially the influence of the frictional stress in the fiber-matrix interface, are pointed out for the unidirectionally reinforced ceramic matrix composite (CMC) system LAS/SiC, which is well documented in the literature.
Influence of Uniaxial Pressure on Dielectric Properties of the PLZT-x/65/35 (x = 11 and 13) Ceramics
2012
Uniaxial pressure (0–1000 bars) effects on the dielectric properties of the PLZT-x/65/35 ceramic samples (x = 11 and 13) samples was investigated. The obtained results reveal that the applied stress largely changes the dielectric properties of these ceramics. Applying uniaxial pressure leads to a reduction of the peak intensity of the electric permittivity and a change of the frequency dispersion. Besides with increasing the pressure the ϵ-peak shifts to a higher temperature. The results show that applying the uniaxial pressure induces similar effects as increasing the Ti−ion concentration in PZT system. These effects can be connected with the change in domain structure under the action of …
Instabilities of the deformation process in cold drawing of poly(ethylene terephthalate) and other polymers
1981
The relationship between drawing rate and drawing stress was studied for amorphous poly(ethylene terephthalate) (PET) under various experimental conditions. Three types of expriments were performed: simple drawing with necking at constant rate, drawing through a conical die, and drawing at constant stress. Under constant stress conditions a transition between two stable regimes of drawing can be observed. The transition occurs at a critical stress σc at which the rate of neck propagation changes by some orders of magnitude. Such a transition was found both below and above the glass transition of PET. With constant drawing rates instabilities of neck propagation were observed under certain e…
Surface Development of (As2S3)1–x (AgI)x Thin Films for Gas Sensor Applications
2011
Thin (As2S3)100−x(AgI)x (x = 0–40) films were deposited by thermal vacuum evaporation from the respective bulk glasses; their structure and morphology before and after illumination with light have been studied by scanning electron microscopy (SEM). As-deposited films show fractional evaporation and surface inhomogeneities but after illumination they become uniform on the surface and in the depth as revealed by SEM top-view and cross-section images. Mechanical parameters like stress and microhardness of as-prepared and illuminated films were also investigated. The results from the stress measurements show variation in both the sign and the magnitude of the values with increasing AgI content …
New model describing the total dispersion of dry powder agglomerates
2010
Micron and submicron particles tend to form agglomerates due to adhesive and cohesive forces. The disintegration of these dry powder agglomerates often represents a major task in powder technology. One model describing the mechanical stability of granulates is given by the planar fracture model of Rumpf. In the present work, a new model is introduced intended for applications where a complete disintegration of dry powder agglomerates is required (e.g. for pharmaceutical aerosol generation). Therefore, the breakup of every single connection inside an agglomerate is considered and the dispersion strength σdisp of model agglomerates is calculated and discussed. In order to balance the stabilit…
Mechanical properties of recycled polymers
1999
Modifications of structure and morphology of the polymers induced by the thermomechanical stress (or by the presence of water for some polymers) during reprocessing can cause a drastic deterioration of mechanical properties of the recycled material. The property reprocessing relationships are an important tool to determine not only the properties of the recycled polymers but also the strategies to use (processing conditions, stabilizers, fillers, compatibilizers, etc) in order to obtain recycled polymers with good mechanical properties. In this work, typical behaviour of some mechanical properties as a function of the number of reprocessing operations is discussed and correlated with their …
Stress fields in general composite laminates
1996
A direct approach is employed to obtain a general boundary integral formulation for the analysis of composite laminates subjected to uniform axial strain. The integral equations governing the problem are directly deduced from the reciprocity theorem, employing the generalized orthotropic elasticity fundamental solutions expressly inferred. The solution is achieved by the boundary element method, which gives, once the traction-free boundary conditions and the interfacial continuity conditions are enforced, a linear system of algebraic equations. The formulation does not present restrictions with regard to the laminate stacking sequence and it does not require any aprioristic assumption. The …
Strength and strain enhancements of concrete columns confined with FRP sheets
2004
The compressive behavior up to failure of short concrete members reinforced with fiber reinforced plastic (FRP) is investigated. Rectangular cross-sections are analysed by means of a simplified elastic model, able also to explain stress-concentration. The model allows one to evaluate the equivalent uniform confining pressure in ultimate conditions referred to the effective confined cross-section and to the effective stresses in FRP along the sides of section; consequently, it makes it possible to determine ultimate strain and the related bearing capacity of the confined member corresponding to FRP failure. The effect of local reinforcements constitute by single strips applied at corners bef…
Luminescence of localized states in silicon dioxide glass. A short review
2011
Abstract The target is the description of the properties of localized states in silica glass, which relate to aspects of short-to-intermediate-range order. It has been observed that laser light interaction with localized states of silica glass leads to the creation of luminescence centers. Created luminescence centers, excited with laser light, provide intra-center luminescence of oxygen deficient centers (ODC) comprising a blue band at 2.7 eV and a UV band at 4.4 eV. Structurally, these ODCs are understood to comprise twofold-coordinated silicons that are commonly part of some larger local structure, and their luminescence bands can be suppressed by reaction with chlorine or hydrogen. Besi…
Biomaterials coated by dental pulp cells as substrate for neural stem cell differentiation
2011
[EN] This study is focused on the development of an in vitro hybrid system, consisting in a polymeric biomaterial covered by a dental pulp cellular stroma that acts as a scaffold offering a neurotrophic support for the subsequent survival and differentiation of neural stem Cells. In the first place, the behavior of dental pulp stroma on the polymeric biomaterial based on ethyl acrylate and hydroxy ethyl acrylate copolymer was studied. For this purpose, cells from normal human third molars were grown onto 0.5-mm-diameter biomaterial discs. After cell culture, quantification of neurotrophic factors generated by the stromal cells was performed by means of an ELISA assay. In the second place, s…