Search results for "Composite"
showing 10 items of 4584 documents
On the mechanisms involved in the tensile strength of a dissimilar Ti6Al4V/316L laser welded assembly
2021
International audience; The aim of the present work is to analyze the thermomechanical behavior of dissimilar laser seams by means of FE modeling. The case of a Ti6Al4V/316L assembly with vanadium insert was considered. Effective mechanical properties of the main materials and cords were first estimated from NHT measurements. Modeling of the double pass laser welding process was performed first by considering shrinking of the two weld seams during manufacturing, to get the residual stress state in the welded assembly. Modeling of the tensile test was performed in a second step to study the assembly behavior during loading. In these modeling results, the mesh was the cross-section of the mic…
A thermodynamically consistent cohesive-frictional interface model for mixed mode delamination
2016
Abstract A new interface constitutive model based on damage mechanics and frictional plasticity is presented. The model is thermodynamically consistent, it is able to accurately reproduce arbitrary mixed mode debonding conditions and it is proved that the separation work is always bounded between the fracture energy in mode I and the fracture energy in mode II. Analytical results are given for proportional loading paths and for two non-proportional loading paths, confirming the correct behavior of the model for complex loading histories. Numerical and analytical solutions are compared for three classical delamination tests and frictional effects on 4ENF are also considered.
Thermal conductivity of disperse insulation materials and their mixtures
2017
Development of new, more efficient thermal insulation materials is a key to reduction of heat losses and contribution to greenhouse gas emissions. Two innovative materials developed at Thermeko LLC are Izoprok and Izopearl. This research is devoted to experimental study of thermal insulation properties of both materials as well as their mixture. Results show that mixture of 40% Izoprok and 60% of Izopearl has lower thermal conductivity than pure materials. In this work, material thermal conductivity dependence temperature is also measured. Novel modelling approach is used to model spatial distribution of disperse insulation material. Computational fluid dynamics approach is also used to est…
Inverse prediction of local interface temperature during electromagnetic pulse welding via precipitate kinetics
2019
Abstract Interface temperature of electromagnetic pulse welding is difficult to measure by insitu methods. Here, the local temperature rise is investigated using the kinetics of precipitates and dispersoids (transformation or dissolution) at the interface zone (IZ) and affected zone (AZ) of three welds. This fine scale analysis allows estimating of local temperature range for AZ that reaches between 250 and 360 °C on both sides of narrow IZ, while the IZ itself experiences between 360 and 500 °C or even beyond 500 °C. The interface temperature increases with the increasing impact intensity. The current work estimated thermal field based on the precipitate transformations, which occur during…
In-process tool rotational speed variation with constant heat input in friction stir welding of AZ31 sheets with variable thickness
2017
In the present work, friction stir welding experiments on AZ31 magnesium alloy sheets, characterized by a variable thickness along the welding line, were carried out. The approach adapted during welding consisted in maintaining constant the heat input to the joint. To this purpose, the rotational speed of the pin tool was increased with decreasing thickness and decreased with increasing thickness in order to obtain the same temperatures during welding. The amount by which the rotational speed was changed as a function of the sheet thickness was defined on the basis of the results given by FEM simulations of the FSW process. Finally, the effect of the in-process variation of the tool rotatio…
Flying Laser Spot Thermography technique for the NDE of Fibre Metal Laminates disbonds
2017
Abstract The present work investigates the features of an active Infrared-NDT Thermography technique derived from a Flying Laser Spot set-up for the analysis of interlaminar disbonds in layered structures in general and Fibre Metal Laminates in particular. The presented technique uses a laser-spot heat source, which moves at a constant speed, raster scanning the object surface. Interlaminar defects parallel to the surfaces act as barriers towards through-the-thickness heat diffusion. This produces some modifications over the surface thermal field which are well identified in the Standard Deviation calculated over a Reference Area following the heat source. The mechanisms leading to such def…
Different Space Charge Behavior of Materials Used in AC and DC Systems
2017
The aim of the present work is to evaluate the behavior, from the space charge accumulation phenomenon point of view, of three different XLPE specimens used as insulation materials in high voltage systems. Considering that under DC stress the charge accumulation is more relevant as compared to the AC case, in the specimens for DC applications additives are typically added. In this work, three different specimens are analyzed. One is a free additive sample used conventionally under AC stress and two others include different additives that are used under DC stress. In order to measure the space charge accumulation, the Pulsed Electro Acoustic (PEA) method has been employed. For each sample, t…
Experimental and numerical study of composite T-joints for marine application
2010
Abstract The aim of this work was to study the behaviour of composite T-joints used in marine applications. The effect of several parameters was investigated. In particular, three configurations were studied; i.e. with adhesive and with two different over-laminations. Moreover, the joined sections were made of different materials. These joints were subjected to a tensile load in the plane of the sheet. To quantify the effect of different designs on the strength, a variance analysis was performed. Finally, a numerical model was developed using a commercial finite element code (Ansys).
Manipulation of nanoparticles of different shapes inside a scanning electron microscope
2014
In this work polyhedron-like gold and sphere-like silver nanoparticles (NPs) were manipulated on an oxidized Si substrate to study the dependence of the static friction and the contact area on the particle geometry. Measurements were performed inside a scanning electron microscope (SEM) that was equipped with a high-precision XYZ-nanomanipulator. To register the occurring forces a quartz tuning fork (QTF) with a glued sharp probe was used. Contact areas and static friction forces were calculated by using different models and compared with the experimentally measured force. The effect of NP morphology on the nanoscale friction is discussed.
Complex tribomechanical characterization of ZnO nanowires: nanomanipulations supported by FEM simulations
2016
In the present work, we demonstrate a novel approach to nanotribological measurements based on the bending manipulation of hexagonal ZnO nanowires (NWs) in an adjustable half-suspended configuration inside a scanning electron microscope. A pick-and-place manipulation technique was used to control the length of the adhered part of each suspended NW. Static and kinetic friction were found by a 'self-sensing' approach based on the strain profile of the elastically bent NW during manipulation and its Young's modulus, which was separately measured in a three-point bending test with an atomic force microscope. The calculation of static friction from the most bent state was completely reconsidered…