Search results for "Computer Science Application"
showing 10 items of 3998 documents
Data gathering and mathematical modelling for pitch stabilisation of a high speed catamaran
2011
This paper deals with the data gathering phase for a 21-foot long planing catamaran. The boat experiences a take-off phenomenon at high speed which needs to be countered. An overview of stability problems in high speed hydroplanes is described with possible solutions recommended. A subsequent gathering of data using laser scanning and computational fluid dynamics (CFD) analysis of the boat are described. The paper ends with a look at the initial developments of stabilising systems for the boat.
An expert system for vineyard management based upon ubiquitous network technologies
2011
Vineyard operations for quality wines production are currently based upon costly and time-consuming manual sampling operations required to assess the maturity phases of grapevines. The ripening process however is significantly influenced by the environmental parameters which nowadays can be effectively monitored by means of ubiquitous computing technologies. Besides the possibility of gathering data, hence, suitable tools are required to support the vineyard management process. The present research concerns the development of an expert system to effectively manage the vineyard operations. The methodology is based on the analysis of the time series of indices related to the maturation phases…
A Compensation Based Method to Model PV Nodes in Backward/Forward Distribution Network Analysis
2007
PurposeThis paper proposes to identify a new model of the fixed voltage nodes (PV nodes) for medium voltage distribution systems analysis. The model is used within backward/forward (b/f) analysis method applied to solve radial and weakly meshed systems.Design/methodology/approachThe model is based on the compensation currents method for multi‐port systems which has been extensively used, within b/f analysis methods, to take into account the presence of meshes and PV nodes.FindingsTest results prove the approach to be more efficient and precise than previous methodologies and put into evidence the good performance of the proposed model in terms of speed and convergence properties.Research li…
Allocation of actuators and sensors for coupled-adjacent-building vibration attenuation
2013
An actuator and sensor allocation approach is proposed for the design of coupled-adjacent-building vibration suppression under seismic excitation. This paper first establishes a full-order model of adjacent buildings with the location information of actuators and sensors. Then, the order of the model is reduced via modal cost analysis, by retaining the modes contributing the most. In view of the fact that the output powers of the actuators are limited, this paper brings forward a mixed H∞/GH2 control. By considering that not all the states of the system can be measured by the sensors, a dynamic output feedback controller is designed. The genetic algorithm is employed to obtain the locations…
Influence of the channel design on the heat and mass exchange of induction channel furnace
2011
PurposeThe purpose of this paper is to present in‐depth numerical modelling of heat and mass exchange in industrial induction channel furnace (ICF).Design/methodology/approachThe turbulent heat and mass exchange in the melt is calculated using a three‐dimensional (3D) electromagnetic model and a 3D transient large eddy simulation method. The simulation model has been verified by flow velocity and temperature measurements, which were carried out using an industrial sized channel inductor operating with Wood's metal as a low temperature model melt.FindingsThe ICF is well‐established for melting, holding and casting in the metallurgical industry. But there are still open questions regarding th…
An analytical model for improving precision in single point incremental forming
2007
Abstract In the modern manufacturing scenario and, in particular, in sheet metal forming, the requirement of customised production is still growing. The introduction of incremental forming enables the production of customised components in small lots. In particular, single point incremental forming is characterised by the simplest equipment; any die, in fact, is avoided reducing the necessary tooling to a simple frame, able to clamp the sheet, and a hemispherical punch that imposes the required deformation. This tooling simplicity and the associated process mechanics, in turn, determine a sometimes relevant lack of accuracy. The paper is focused on the investigation of the influence of the …
Vibration analysis for bearing fault detection and classification using an intelligent filter
2014
Abstract This paper proposes an intelligent method based on artificial neural networks (ANNs) to detect bearing defects of induction motors. In this method, the vibration signal passes through removing non-bearing fault component (RNFC) filter, designed by neural networks, in order to remove its non-bearing fault components, and then enters the second neural network that uses pattern recognition techniques for fault classification. Four different categories include; healthy, inner race defect, outer race defect, and double holes in outer race are investigated. Compared to the regular fault detection methods that use frequency-domain features, the proposed method is based on analyzing time-d…
Effect of the non-linearity of demagnetization curves on the torque of hybrid stepping motors with permanent magnets in slots
1998
The recent achievements in electronic control as well as the higher performance of advanced permanent magnets have brought about a change in the general strategy for design and development of new types of small electrical machines. A special application of permanent magnets (PM) is represented by hybrid stepping motors (HSM). The latter are a sort of combination of variable reluctance‐motors and permanent magnet‐motors. The influence of various PM inserts into the magnetic circuits of electromechanical converters on field and force distribution has been already investigated by the authors (1996). Promising results for HSM have been reported, especially when rare‐earth PMs are used. The main…
Vibration signature analysis for monitoring rotor broken bar in double squirrel cage induction motors based on wavelet analysis
2014
Purpose – The purpose of this paper is to present a diagnosis technique, for rotor broken bar in double cage induction motor, based on advanced use of wavelet transform analysis. The proposed technique is experimentally validated. Design/methodology/approach – The proposed approach is based on a combined use of frequency sliding and wavelet transform analysis, to isolate the contribution of the rotor fault components issued from vibration signals in a single frequency band. Findings – The proposed technique is reliable for tracking the rotor fault components over time-frequency domain. The quantitative analysis results based on this technique are the proof of its robustness. Research limit…
An Investigation of the Cutting Process for Chip Breaking Monitoring in Turning of Steels
1998
This paper presents some results of an experimental study on chip breaking monitoring when turning steels with chip forming inserts. In the first part of this study the recognition of chip forms by means of cutting force analysis in the frequency domain is described. Generally, the present work is concerned with the use of the interface control factor for determining the transition from unacceptable chip forms to the chip breaking. For this purpose experiments under approximately orthogonal machining conditions including measuring the shear strain, the cutting energy and the average interface temperature are carried out. The obtained results confirmed that the initiation of acceptable chip …