Search results for "Computer Science Application"

Magnetic properties of colloidal cobalt nanoclusters

2010

Abstract. Co nanoclusters were synthesized by an inverse-micelle chemical route. The magnetic and microstructural properties of the nanoparticles have been analyzed as a function of the surfactant (AOT and DEHP) and the drying method. Microstructural analysis has been performed by TEM and XANES; magnetic properties have been studied by hysteresis loops and zero-field cooling - field cooling (ZFC-FC) curves. TEM images show 2 to 4 nm sized particles spherical in shape. XANES measurements point out a significant presence of Co3O4 with metallic Co and some Co2+ bound to the surfactant. The presence of antiferromagnetic Co3O4 explains the magnetic transition observed at low T in both ZFC-FC mea…

Obtaining of nanostructured ZnO coatings using mechanoactivated oxidation

2007

The concept to use nanostructured state of metal at the instant of destruction in air environment was used to obtain nanostructured Zn-ZnO coatings on glass and quartz by mechanical method. Subsequent annealing in the ambient atmosphere, annealing in vacuum and irradiation with 532-nm YAG:Nd laser were used to obtain completely oxidized, transparent ZnO coatings. The saturated with oxygen nanostructured coatings were transformed into nanostructured ZnO coatings after annealing above 773K or irradiation with laser (allowing to reach 673K) in ambient atmosphere. AFM and SEM images show that after annealing ZnO coatings have multi-shaped structure. The formation of ZnO need-like whiskers (d = …

Quantum size effect in single-crystalline bismuth nanorods

2017

Distribution of relaxation times in 0.5PMN-0.5PSN ceramics

2007

Dielectric properties of chemically ordered and disordered 0.5PbMg1/3Nb2/3O3-0.5 PbSc1/2Nb1/2O3 (0.5PMN-0.5PSN) ceramics were investigated in frequency range from 20 Hz to 3 GHz by dielectric spectroscopy. The broad dielectric dispersion, similar to this typically obtained for relaxor ferroelectrics (RFE), was observed in both ceramics below 350 K. The frequency dependence of dielectric permittivity of these ceramics were analyzed in terms of the distribution of relaxation times and showed the splitting into two components at lower temperatures. The longest relaxation times part slows down following Vogel-Fulcher law with lower freezing temperature compare with typical RFE like PbMg1/3Nb2/3…

Magnetization relaxation in YBCO films with improved supercurrent transport properties

2010

The relaxation of the irreversible magnetization in optimally doped YBCO films with natural and artificial pinning centres was measured in zero-field cooling conditions using SQUID magnetometry. The external magnetic field H was oriented along the c axis. An appropriate method for the determination of the characteristic vortex pinning energy from the normalized vortex-creep activation energy is discussed. This is based on the existence of a crossover elastic (collective) vortex creep at low temperatures T – plastic vortex creep at high T, caused by the T dependent macroscopic currents induced in the sample during magnetization measurements.

Influence of the boundary conditions on heat and mass transfer in spacer-filled channels

2017

The purpose of this study is to discuss some problems which arise in heat or mass transfer in complex channels, with special reference to the spacer-filled channels adopted in membrane processes. Among the issues addressed are the consistent definition of local and mean heat or mass transfer coefficients; the influence of the wall boundary conditions; the influence of one-side versus two-side heat/mass transfer. Most of the results discussed were obtained by finite volume CFD simulations concerning heat transfer in Membrane Distillation or mass transfer in Electrodialysis and Reverse Electrodialysis, but many of the conclusions apply also to different processes involving geometrically compl…

Time-Resolved Luminescence of Nanocrystalline Inorganic Complex Oxides

2007

Two types of complex nanosized oxides – cerium doped Y3Al5O12 (YAG) and CaWO4– have been studied by means of time-resolved luminescence spectroscopy. Comparative study of time-resolve luminescence characteristics of cerium doped YAG single crystal, nanopowders and nanoceramic as well as for CaWO4 macro- and nanocrystals has been done. Two components in the decay kinetic of Ce3+ related emission in YAG nanocrystals were detected and it was suggested that a different energy transfer rate to volume and surface Ce3+ ions takes place. It is shown that the segregation of Ce3+ ions near nanoparticles surface and/or dislocation lines plays a crucial role in degradation of light yield of cerium rela…

Nano composite membrane-electrode assembly formation for fuel cell-modeling aspects

2007

Long term stability is an essential requirement for fuel cell applications in automobile and stationary energy systems. In these systems the agglomeration of the catalyst nanoparticles is a well-known phenomenon which cannot be easily overcome or compensated for by re-designing the system. A direct result of this occurrence is the irreversible decrease of the electrochemical performance. Irregularities in electric field distribution are one root cause for migration and subsequent agglomeration of the catalyst nanoparticle. In this work, the impact of the electrode mechanical deformation on electric field distribution was studied using a computer modeling approach. Model of a Proton Exchange…

Microfabrication of hybrid fluid membrane for microengines

2015

International audience; This paper describes the microfabrication and dynamic characterization of thick membranes providing a technological solution for microengines. The studied membranes are called hybrid fluid-membrane (HFM) and consist of two thin membranes that encapsulate an incompressible fluid. This work details the microelectromechanical system (MEMS) scalable fabrication and characterization of HFMs. The membranes are composite structures based on Silicon spiral springs embedded in a polymer (RTV silicone). The anodic bonding of multiple stacks of Si/glass structures, the fluid filling and the sealing have been demonstrated. Various HFMs were successfully fabricated and their dyna…

Normal metal - insulator - superconductor thermometers and coolers with titanium-gold bilayer as the normal metal

2018

We have fabricated superconductor - insulator - normal metal - insulator - superconductor (SINIS) tunnel junctions in which Al acts as the superconductor, AlOx is the insulator, and the normal metal consists of a thin Ti layer (5 nm) covered with a thicker Au layer (40 nm). We have characterized the junctions by measuring their current-voltage curves between 60 mK and 750 mK. For comparison, the same measurements have been performed for a SINIS junction pair whose normal metal is Cu. The Ti-Au bilayer decreases the SINIS tunneling resistance by an order of magnitude compared to junctions where Cu is used as normal metal, made with the same oxidation parameters. The Ti-Au devices are much mo…