Search results for "Computer Science Applications"

Reexamining Different Factors of the Resonance-Enhanced High-Order Harmonic Generation in Atomic and Nanoparticle Laser-Induced Tin Plasmas

2021

We reexamine the resonance enhancement of a single harmonic emission during the propagation of ultrafast pulses through atomic and nanoparticle tin-containing laser-induced plasma (LIP). We compare the single atomic Sn and Sn nanoparticle plasmas to demonstrate a distinction in the enhancement factor of the single harmonic in the case of fixed and tunable near-infrared pulses. The analysis of the dynamics of Sn LIP shows the range of optimal delays between heating and driving pulses (130–180 ns), at which the maximal harmonic yield can be achieved. The enhancements of the 17th and 18th harmonics of 806 nm pulses were analyzed in the case of single-color and two-color pumps of LIP, showing u…

Elucidating the Effect of Bimodal Grain Size Distribution on Plasticity and Fracture Behavior of Polycrystalline Materials

2020

The refinement of grains in a polycrystalline material leads to an increase in strength but as a counterpart to a decrease in elongation to fracture. Different routes are proposed in the literature to try to overpass this strength-ductility dilemma, based on the combination of grains with highly contrasted sizes. In the simplest concept, coarse grains are used to provide relaxation locations for the highly stressed fine grains. In this work, a model bimodal polycrystalline system with a single coarse grain embedded in a matrix of fine grains is considered. Numerical full-field micro-mechanical analyses are performed to characterize the impact of this coarse grain on the stress-strain const…

Dielectric spectroscopy as a potential technique for prediction of kiwifruit quality indices during storage

2019

Dielectric spectroscopy has been employed as a simple, low cost and a non-destructive way for prediction of some physicochemical indices of kiwifruit during storage. A parallel-plate capacitor was developed and supplied with sinusoidal voltage waves within a frequency range of 40 kHz – 20 MHz. Dielectric properties of samples were measured by the dielectric sensor. Additionally, changes associated with fruit ripening properties, including firmness, total soluble solid (TSS) and pH were determined as a function of time at 2 °C. The results showed that storage time significantly affected the quality characteristics of kiwifruit. Artificial neural networks (ANNs) were employed to develop model…

2020

For medical application, easily accessible biomaterials with tailored properties are desirable. Collagen type I represents a biomaterial of choice for regenerative medicine and tissue engineering. Here, we present a simple method to modify the properties of collagen and to generate collagen laminates. We selected three commercially available collagen sheets with different thicknesses and densities and examined the effect of rose bengal and green light collagen crosslinking (RGX) on properties such as microstructure, swelling degree, mechanical stability, cell compatibility and drug release. The highest impact of RGX was measured for Atelocollagen, for which the swelling degree was reduced f…

Flow resistance law under suspended sediment laden conditions

2020

Abstract The uniform flow resistance equation, in the form due to Manning or Darcy-Weisbach, is widely applied to establish the stage-discharge relationship of a river cross-section. The application of this equation, namely the slope-area method, allows to indirectly measure the corresponding river discharge by measurements of bed slope, water level, cross-section area, wetted perimeter and an estimate of channel roughness. In this paper, a recently deduced flow resistance equation for open channel flow was tested during conditions of suspended sediment-laden flow. First, the flow resistance equation was determined by dimensional analysis and by applying the condition of incomplete self-sim…

Wavelet and fractal approach to surface roughness characterization after finish turning of different workpiece materials

2009

In this paper, the surface profiles generated in longitudinal turning operations were characterized using continuous wavelet transform (CWT) and normalized fractal dimension Dn. In the comparative analysis, some characteristic roughness profiles after the turning of different workpiece materials, such as C45 medium carbon steel, nodular cast iron and hardened (55 HRC) high-strength alloy steel were selected. For wavelet characterization, both Morlet and ‘Mexican hat’ analyzing wavelets, which allow the assessment of extrema and frequency distribution, were utilized. The results of the CWT as a function of profile and momentary wavelet length are presented. It is concluded that CWT can be us…

Defect characterization in Al welded joints by non-contact Lamb wave technique

2006

Abstract The use of air-coupled sensors to detect flaws in Al welded joints and the advantage of Lamb wave for their characterization has been proved. Ultrasonic waves were generated by a pulsed laser and by contact angle-beam transducer, and received by an air-coupled capacitive transducer. Laser-based configuration was used to quickly locate the defect, whereas the angle-beam contact probe configuration to characterize it thanks to the dispersive behavior of Lamb waves. Guided waves allow inspection of the complete thickness with only one scan, permitting to detect and to size both internal and surface defects; their high flexibility in the measurement is due to the various parameters cha…

Cladding-Pumped Erbium/Ytterbium Co-Doped Fiber Amplifier for C-Band Operation in Optical Networks

2021

Space-division multiplexing (SDM) attracts attention to cladding-pumped optical amplifiers, but they suffer from a low pump power conversion efficiency. To address this issue, ytterbium (Yb3+) and erbium (Er3+) co-doping is considered as an effective approach. However, it changes the gain profile of Er3+-doped fiber amplifiers and induces the gain difference between optical wavelengths in the C-band, significantly limiting the effective band of the dense wavelength-division multiplexed (DWDM) system. This paper is devoted to a detailed study of a cladding-pumped Er3+/Yb3+ co-doped fiber amplifier (EYDFA) through numerical simulations aiming to identify a configuration, before assembling a s…

Mechanical behaviour and failure modes of metal to composite adhesive joints for nautical applications

2010

In this paper, the influence of several parameters on the mechanical behaviour and failure modes of hybrid bonded joints aluminium/composite was investigated. Particularly, the effects of metallic surface condition, adhesive properties and thickness on single-lap joint resistance were analysed. To these aims, two adhesives were used and, for each adhesive, two different adhesive thicknesses (0.5 and 1.5 mm) have been investigated. Furthermore, two sets of joints for each adhesive kind and thickness were investigated: the former was obtained using aluminium blanks which were previously mechanically treated with sandpaper (P60) and the latter using aluminium treated with sandpaper and with pr…

Hybrid Particle-Field Molecular Dynamics Simulations of Charged Amphiphiles in an Aqueous Environment.

2018

We develop and test specific coarse-grained models for charged amphiphilic systems such as palmitoyloleoylphosphatidylglycerol (POPG) lipid bilayer and sodium dodecyl sulfate (SDS) surfactant in an aqueous environment, to verify the ability of the hybrid particle-field method to provide a realistic description of polyelectrolytes. According to the hybrid approach, the intramolecular interactions are treated by a standard molecular Hamiltonian, and the nonelectrostatic intermolecular forces are described by density fields. Electrostatics is introduced as an additional external field obtained by a modified particle-mesh Ewald procedure, as recently proposed [Zhu et al. Phys. Chem. Chem. Phys.…