Search results for "Contact angle"

Evolution of the sp2 content and revealed multilayer growth of amorphous hydrogenated carbon (a-C:H) films on selected thermoplastic materials

2017

Amorphous hydrogenated carbon (a-C:H) films were gradually deposited on high-density polyethylene (HDPE), polyethylene terephthalate (PET) and polyoxymethylene (POM) via an indirect (f-type) and a direct (r-type) plasma-enhanced chemical vapor deposition (PECVD) process with acetylene plasma. The surface morphologies of the thicker r-depositions on the three different thermoplastics have been analyzed by atomic force microscopy (AFM) at varying micrometer scales. Absorbance spectroscopy has been used to characterize the optical properties of all coatings. Intrinsic stress release phenomena are revealed on thicker layers through the detection of characteristic surface corrugations. Based on …

One-step electrodeposition of superhydrophobic coating on 316L stainless steel

2021

Superhydrophobic coatings were fabricated through a one-step electrochemical process onto the surface of 316L stainless steel samples. The presence of hierarchical structures at micro/nanoscale and manganese stearate into the coatings gave superhydrophobicity to the coating, with contact angle of ~160°, and self-cleaning ability. Corrosion resistance of 316L samples was also assessed also after the electrodeposition process through Electrochemical Impedance Spectra recorded in an aqueous solution mimicking seawater condition.

Influence of modification time and high frequency ultrasound irradiation on self-assembling of alkylphosphonic acids on stainless steel : electrochem…

2015

International audience; Self-assembly of alkylphosphonic acids on stainless steel was investigated under different conditions. Four different alkylphosphonic acids exhibiting alkyl chain of various size were synthesized and studied: butylphosphonic acid (C4P), octylphosphonic acid (C8P), decylphosphonic acid (C10P), and hexadecylphosphonic acid (C16P). Electrochemistry experiments were extensively carried out in order to determine electrochemical surface blocking of adsorbed layers in function of grafting time. In term of surface blocking, an 8h modification time was optimal for all alkylphosphonic acids. Longer immersion times lead to degradation of adsorbed layers. For the first time, gra…

Assembly of citrate gold nanoparticles on hydrophilic monolayers

2016

Abstract Self-assembled monolayers (SAMs) as model surfaces were linked onto planar gold films thorough lipoic acid or disulfide groups. The molecules used were polyethylene glycol (EG-S-S), N -[tris-(hydroxymethyl)methyl]acrylamide polymers with and without lipoic acid (Lipa-pTHMMAA and pTHMMAA) and a lipoic acid triazine derivative (Lipa-MF). All the layers, but Lipa-MF with a primary amino group were hydroxyl terminated. The layers were characterized by contact angle measurements and atomic force microscopy, AFM. Citrate stabilized nanoparticles, AuNPs in water and phosphate buffer were allowed to assemble on the layers for 10 min and the binding was followed in real-time with surface pl…

Moisture barrier, wetting and mechanical properties of shellac/agar or shellac/cassava starch bilayer bio-membrane for food applications

2008

Abstract Edible bilayer membrane composed of agar (AG) or cassava starch (CAS) as a cohesive structural layer and ethanol-cast shellac layer as a moisture barrier are investigated for their potential use in food preservation as bio-packaging film, membrane or coating. Bilayer membranes containing non-plasticized shellac exhibit low water vapor permeability (WVP), from 0.89 to 1.03 × 10 −11  g m −1  s −1  Pa −1 . A high value of contact angle (≈92°) and a low liquid water adsorption rate (26 × 10 −3  μL s −1 ) indicate that these barrier layers have a quite hydrophobic surface. However, the rigid and brittle characteristics of shellac induce a lack of integrity for this layer. It tends to be…

Reactive Coatings in Glass Capillaries: Preparation of Temperature- and Light-Responsive Surfaces and Accurate Determination of Wettability Switching

2015

Heterogeneous nucleation of a droplet pinned at a chemically inhomogeneous substrate: A simulation study of the two-dimensional Ising case

2018

Heterogeneous nucleation is studied by Monte Carlo simulations and phenomenological theory, using the two-dimensional lattice gas model with suitable boundary fields. A chemical inhomogeneity of length b at one boundary favors the liquid phase, while elsewhere the vapor is favored. Switching on the bulk field Hb favoring the liquid, nucleation and growth of the liquid phase starting from the region of the chemical inhomogeneity are analyzed. Three regimes occur: for small fields, Hb bcrit, the critical droplet radius is so large that a critical droplet having the contact angle θc required by Young's equation in the region of the chemical inhomogeneity does not yet "fit" there since the base…

Nanodroplets on a solid plane: wetting and spreading in a Monte Carlo simulation

2002

Abstract The wetting behavior and spreading dynamics of small polymer melt droplets in the course of transition from partial to complete wetting conditions on a flat structureless solid substrate have been studied by dynamic Monte Carlo simulation. From the density profiles of the drops we determine the contact angles at varying strength of the van der Waals surface forces in the whole interval of partial wetting. The validity of Young's equation is then tested whereby the surface tension of the melt/vapor interface is derived independently from interfacial fluctuation analysis, and the surface free energy of the melt at the substrate—from the anisotropy of the local pressure at the wall. T…

Effect of hydraulic coefficient on membrane performance for rejection of emerging contaminants

2018

International audience; The efficient removal of Endocrine Disruptive Chemicals (EDCs) namely oxybenzone and atrazine using polysulfone (PSf) composite membranes is reported in this article. A negatively charged hydrophilic mixed matrix membrane was prepared by using Polyaniline modified halloysite nanotubes (PANi-HNT) and polysulfone. The X-ray diffraction (XRD) and attenuated total reflectance infrared (ATR-IR) technique confirm the conversion of Halloysite nanotubes to Polyaniline modified halloysite nanotubes and their presence in membrane matrix. The microvoids observable in the SEM images depict the internal structure of the membrane. Further, increasing in the water uptake and decrea…

Surface investigation of adhesive formulation consisting of UV sensitive triblock poly(styrene–b-butadiene–b-styrene) copolymer

2002

Abstract Atomic force microscopy (AFM) analysis in conjunction with macroscopic studies such as peel testing and contact angle measurement have been undertaken to explain the nanomechanical properties of adhesive formulation consisting of triblock poly(styrene–b-butadiene–b-styrene) (SBS) copolymers. The cross-linking of this photosensitive copolymer was investigated by analyzing the mechanical and morphological changes of each phase induced by the UV exposure. Main result is that the adhesive properties are strongly influenced by the cross-linking of the polybutadiene (PB) phase leading to an increase in the surface stiffness without affecting the surface energy. AFM analysis shows that th…