Search results for "Contact angle"
showing 10 items of 138 documents
Dual Ni/Ni-Co electrodeposited coatings for improved erosion-corrosion behaviour
2019
Abstract Industrial applications of hydrophobic metallic coatings are limited to durability of their surface structures against detrimental effects of the surrounding environments. In the present research, the life-long of the hierarchical structure of hydrophobic nickel coating in an erosive-corrosive solution was investigated. The effect of alloying with cobalt on strengthening the hierarchical structures was also investigated. In this regard, highly hydrophobic Ni/Ni, Ni-Co/Ni-Co, dual Ni/Ni-Co and dual Ni-Co/Ni coatings with rough hierarchical structures were electrodeposited. In situ electrochemical measurements were performed to investigate changes in corrosion resistance and hydropho…
Microsphere tensiometry to measure advancing and receding contact angles on individual particles
1999
In this paper, a method to measure the advancing and receding contact angles on individual colloidal spheres is described. For this purpose, the microspheres were attached to atomic force microscope cantilevers. Then the distance to which the microsphere jumps into its equilibrium position at the air-liquid interface of a drop or an air bubble was measured. From these distances the contact angles were calculated. To test the method, experiments were done with silanized silica spheres (4.1 μm in diameter). From the experiments with drops, an advancing contact angle of 101 ± 4° was determined. A receding contact angle of 101 ± 2° was calculated from the jump-in distance into a bubble. Both ex…
Engineered Membranes for Residual Cell Trapping on Microfluidic Blood Plasma Separation Systems: A Comparison between Porous and Nanofibrous Membranes
2021
Blood-based clinical diagnostics require challenging limit-of-detection for low abundance, circulating molecules in plasma. Micro-scale blood plasma separation (BPS) has achieved remarkable results in terms of plasma yield or purity, but rarely achieving both at the same time. Here, we proposed the first use of electrospun polylactic-acid (PLA) membranes as filters to remove residual cell population from continuous hydrodynamic-BPS devices. The membranes hydrophilicity was improved by adopting a wet chemistry approach via surface aminolysis as demonstrated through Fourier Transform Infrared Spectroscopy and Water Contact Angle analysis. The usability of PLA-membranes was assessed through de…
Detaching Microparticles from a Liquid Surface.
2018
The work required to detach microparticles from fluid interfaces depends on the shape of the liquid meniscus. However, measuring the capillary force on a single microparticle and simultaneously imaging the shape of the liquid meniscus has not yet been accomplished. To correlate force and shape, we combined a laser scanning confocal microscope with a colloidal probe setup. While moving a hydrophobic microsphere (radius 5-10 μm) in and out of a 2-5 μm thick glycerol film, we simultaneously measured the force and imaged the shape of the liquid meniscus. In this way we verified the fundamental equations [D. F. James, J. Fluid Mech. 63, 657 (1974)JFLSA70022-112010.1017/S0022112074002126; A. D.…
Effect of latex on surface structure and wetting of pigment coatings
2010
Abstract The amount and type of latex binder has a significant effect on both the structure and chemical properties of pigment coatings, which affects critical surface properties, e.g., gloss, ink setting rate via liquid absorption, and spreading properties. Increased knowledge is required for improved optimization in practical applications of pigment coating layers. To this end, the effect of binder amount for two different styrene–butadiene latices in kaolin pigment coatings on a base paper was studied, by measuring the surface topography, surface chemistry, and liquid absorption of these coatings. The topography was thoroughly analyzed from nanometer to millimeter length scales by atomic…
Pickering Emulsions of Fluorinated TiO2: A New Route for Intensification of Photocatalytic Degradation of Nitrobenzene
2020
International audience; Fluorination of the TiO2 surface has been often reported as a tool to increase the photocatalytic efficiency due to the beneficial effects in terms of production of oxidizing radicals. Moreover, it is shown that the unique amphiphilic properties of the fluorinated TiO2 (TiO2-F) surface allow one to use this material as a stabilizer for the formulation of Pickering emulsions of poorly soluble pollutants such as nitrobenzene (NB) in water. The emulsions have been characterized in terms of size of the droplets, type of emulsion, possibility of phase inversion, contact angle measurements, and optical microscopy. The emulsified system presents micrometer-sized droplets of…
Surface characterization of functional poly(diacetylene) and poly(butadiene) mono- and multilayers
1982
The surface properties of Langmuir-Blodgett mono- and multilayers of a variety of amphiphilic poly(diacetylene)s and poly(butadiene)s were investigated by contact angle, streaming potentialζ, ellipsometry, and X-ray photoelectron spectroscopic (XPS) measurements. Captive air and octane angles varied between approximately 60° and 105° for hydrophobicx-layers and 31° to 46° for hydrophilic surfaces depending on the particular head group, whereas advancing angles determined via the vertical plate method are considerably higher. Negative streaming potentials were obtained for all surfaces. Positively charged monolayers yielded less negativeζ- potential values (−28 mV) than negatively charged (−…
Formation and Characterization of Self-Assembled Films of Thiol-Derivatized Poly(Dimethylsiloxane) on Gold
1997
Poly(dimethylsiloxane) (PDMS) copolymers containing propanethiol side chain “stickers” for forming self-assembled films on gold surfaces have been studied by various experimental techniques including ellipsometry, contact angle measurements, FT-IR, angle-dependent XPS, and ToF−SIMS. The results show that the thiol-containing side chains do not all chemisorb to the gold surfaces. In addition, the concentration of these sticker units was found to have a dominant effect on the polymer film thickness, the surface wetting properties, and the orientation of the PDMS backbone. Ab initio calculations reveal that the IR-active PDMS Si−O stretching bands can be used as indications of chain orientatio…
The Unique Versatility of the Double Metal Cyanide (DMC) Catalyst: Introducing Siloxane Segments to Polypropylene Oxide by Ring-Opening Copolymerizat…
2020
The combination of hydrophobic polydimethylsiloxane (PDMS) blocks with hydrophilic polyether segments plays a key role for silicone surfactants. Capitalizing on the double metal cyanide (DMC) catalyst, the direct (i.e., statistical) copolymerization of cyclic siloxanes and epoxides is shown to be feasible. The solvent-free one-pot copolymerization of hexamethylcyclotrisiloxane and propylene oxide results in the formation of gradient propylene oxide (PPO)-PDMS copolymers. Copolymers with up to 46% siloxane content with low dispersities (Ð < 1.2) are obtained in the molecular weight range of 2100-2900 g mol-1 . The polymerization kinetics are investigated by pressure monitoring and in situ 1 …
Carvacrol affects interfacial, structural and transfer properties of chitosan coatings applied onto polyethylene
2012
Different chitosan coating solutions were tested with the aim of investigating their adhesion and wettability onto polyethylene film to improve packaging performance and provide antimicrobial properties. Surface wetting kinetics was monitored by contact angle measurements. Addition of ethanol and carvacrol improved wettability and adhesion of the thin chitosan layer. Structure, water vapour, O2, CO2 and air permeabilities of self supported chitosan films and coated polyethylene were determined. The formation of a thin chitosan layer on polyethylene improved gas barrier properties decreasing the Permeability Coefficient for oxygen and carbon dioxide ( [Formula: see text] , [Formula: see text…