Search results for "Control theory"

Robust Adaptive H∞ Synchronization of Master-Slave Systems with Discrete and Distributed Time-Varying Delays and Nonlinear Perturbations

2011

Author's version of a chapter published in the book: Proceedings of the 18th IFAC World Congress 2011. Also available from the publisher at: http://dx.doi.org/10.3182/20110828-6-IT-1002.03116

Tuning of Extended Kalman Filters for Sensorless Motion Control with Induction Motor

2019

This work deals with the tuning of an Extended Kalman Filter for sensorless control of induction motors for electrical traction in automotive. Assuming that the parameters of the induction motor-load model are known, Genetic Algorithms are used for obtaining the system noise covariance matrix, considering the measurement noise covariance matrix equal to the identity matrix. It is shown that only stator currents have to be acquired for reaching this objective, which is easy to accomplish using Hall-effect transducers. In fact, the Genetic Algorithm minimizes, with respect to the system covariance matrix, a suitable measure of the displacement between the stator currents experimentally acquir…

Selective Harmonic Elimination in a 5-Level Single Phase Converter with FPGA Based Controller

2018

Multilevel converters are becoming popular in high-power applications such as motor drives, renewable energy systems and distribution systems. Among all modulation techniques, selective harmonic elimination methods offer high quality voltage waveforms with operations at low switching frequency, hence, they are especially suitable for high-power applications. In this paper, a new analytical expression for the SHE problem formulated for a five-level converter is introduced, which is able to calculate the exact value of the switching angles. After a mathematical description of the proposed approach, this manuscript reports simulation and experimental results and analysis showing achievable res…

Modelling and Control of a 2-DOF Robot Arm with Elastic Joints for Safe Human-Robot Interaction

2021

Collaborative robots (or cobots) are robots that can safely work together or interact with humans in a common space. They gradually become noticeable nowadays. Compliant actuators are very relevant for the design of cobots. This type of actuation scheme mitigates the damage caused by unexpected collision. Therefore, elastic joints are considered to outperform rigid joints when operating in a dynamic environment. However, most of the available elastic robots are relatively costly or difficult to construct. To give researchers a solution that is inexpensive, easily customisable, and fast to fabricate, a newly-designed low-cost, and open-source design of an elastic joint is presented in this w…

Probabilistic Self-Localization and Mapping - An Asynchronous Multirate Approach

2008

[EN] In this paper, we present a set of robust and efficient algorithms with O(N) cost for the solution of the Simultaneous Localization And Mapping (SLAM) problem of a mobile robot. First, we introduce a novel object detection method, which is mainly based on multiple line fitting method for landmark detection with regular constrained angles. Second, a line-based pose estimation method is proposed, based on LeastSquares (LS). This method performs the matching of lines, providing the global pose estimation under assumption of known Data-Association. Finally, we extend the FastSLAM (FActored Solution To SLAM) algorithm for mobile robot self-localisation and mapping by considering the asynchr…

Two new sum-of-sinusoids-based methods for the efficient generation of multiple uncorrelated rayleigh fading waveforms

2009

Article from the journal: IEEE Transactions on Wireless Communications Publisher's version: http://dx.doi.org/10.1109/twc.2009.080769 This paper deals with the design of a set of multiple uncorrelated Rayleigh fading waveforms. The Rayleigh fading waveforms are mutually uncorrelated, but each waveform is correlated in time. The waveforms are generated by using the deterministic sum-of-sinusoids (SOS) channel modeling principle. Two new closed-form solutions are presented for the computation of the model parameters. Analytical and numerical results show that the resulting deterministic SOS-based channel simulator fulfills all main requirements imposed by the reference model with given correl…

Active Disturbance Rejection Control of Synchronous Reluctance Motors

2020

This paper describes how the ADRC (Active Disturbance Rejection Control) strategy can be successfully applied to SynRM (Synchronous Reluctance Motor) drives. The ADRC is an adaptive robust extension of the input-output Feedback Linearization Control (FLC). Its main feature is that the nonlinear transformation of the state is computed on-line and not by using the model. As a consequence, any unmodelled dynamics or uncertainty of the parameters can be addressed. The control strategy has been verified successfully with experimental tests confirming the high dynamic response of the drive.

Design, Control, and Analysis of Nonlinear Circuits with Tunnel Diode with Piecewise Affine Dynamics

2019

Fault detection for continuous-time switched systems under asynchronous switching

2013

In this chapter, the problem of FD for continuous-time switched systems under asynchronous switching is investigated. The designed FD filter is assumed to be asynchronous with the original systems. Attention is focused on designing a FD filter such that the estimation error between the residual and the fault is minimized in the sense of H ∞ norm. By employing piecewise Lyapunov function and ADT techniques, a sufficient condition for the existence of such a filter is exploited in terms of certain LMIs. Finally, an example is provided to illustrate the effectiveness of the proposed approach.

Optimised assembly mode reconfiguration of the 5-DOF Gantry-Tau using mixed-integer programming

2010

Pulished version of an article in the journal: Meccanica. Also available from the publisher at: http://dx.doi.org/10.1007/s11012-010-9404-y This paper presents a systematic approach based on Mixed Integer Linear Programming for finding an optimal singularity-free reconfiguration path of the 5-DOF Gantry-Tau parallel kinematic machine. The results in the paper demonstrate that singularity-free reconfiguration (change of assembly mode) of the machine is possible, which significantly increases the usable workspace. The method has been applied to a full-scale prototype and the singularity-free path has been verified both in simulations and with physical experiments using real-time control of th…