Search results for "Control theory"
showing 10 items of 1333 documents
Experimental analysis with FPGA controller-based of MC PWM techniques for three-phase five level cascaded H-bridge for PV applications
2016
The FPGA represents a valid solution for the design of control systems for inverters adopted in the field of PV systems because of their high flexibility of use. This paper presents an experimental analysis of the MC SPWM techniques for a three-phase, five-level, cascaded H-Bridge inverter with FPGA controller-based. Several control algorithms are implemented by means of the VHDL programming language and the output voltage waveforms obtained from the main PWM techniques are compared in terms of THD%. Simulation and experimental results are analysed, compared and discussed.
Online optimization of a multi-conversion-level DC home microgrid for system efficiency enhancement
2017
In this paper, an on-line management system for the optimal efficiency operation of a multi-bus DC home distribution system is proposed. The operation of the system is discussed with reference to a distribution system with two conversion stages and three voltage levels. In each of the conversion stages, three paralleled DC/DC converters are implemented. A Genetic Algorithm performs the on-line optimization of the DC network’s global efficiency, generating the optimal current sharing ratios of the concurrent power converters. The overall DC/DC conversion system including the optimization section is modelled using MATLAB/Simulink. Thanks to the implemented online algorithm, considering …
Kinematic Solutions of a 7 DOF Robotic Arm Using Redundancy Circle and Fuzzy Models
2014
In this paper we have presented a method to solve the inverse kinematics problem of a redundant robotic arm with seven degrees of freedom and a human like workspace based on mathematical equations, Fuzzy Logic implementation and Simulink models. For better visualization of the kinematics simulation a CAD model that mimics the real robotic arm was created into SolidWorks® and then the CAD parts were converted into SimMechanics model.
Sequential design of multioverlapping controllers for structural vibration control of tall buildings under seismic excitation
2012
In this article, a computationally effective strategy to obtain multioverlapping controllers via the inclusion principle is applied to design a state-feedback multioverlapping linear-quadratic regulator controller for a 20-story building. The proposed semidecentralized controller only requires state information of neighboring stories to compute the corresponding control actions. This particular information exchange configuration allows introducing a dramatic reduction in the transmission range required for a wireless implementation of the communications system. More specifically, just a one-story transmission range is required by the proposed multioverlapping controller, while a full-buildi…
Expert control of DO in the aerobic reactor of an activated sludge process
2001
Abstract An expert control structure is proposed for the control of dissolved oxygen (DO) in a Nitrification Denitrification Biological Excess Phosphorus Removal (NDBEPR) plant to account for the several processes that are influenced by the DO concentration in the aerator. In the scheme a supervisory fuzzy controller determines the set point of an inner DO control loop where an Adaptive Robust Generic Model Control (ARGMC) controller is used. The fuzzy supervisory control has a hierarchical structure. Off-line measurements of biological parameters of influent and effluent streams can be used to periodically update the set points of the fuzzy controllers. The complete control scheme has been…
Motion Control of Four-Wheel Independently Actuated Electric Ground Vehicles considering Tire Force Saturations
2013
A vehicle stability control approach for four-wheel independently actuated (FWIA) electric vehicles is presented. The proposed control method consists of a higher-level controller and a lower-level controller. An adaptive control-based higher-level controller is designed to yield the vehicle virtual control efforts to track the desired vehicle motions due to the possible modeling inaccuracies and parametric uncertainties. The lower-level controller considering tire force saturation is given to allocate the required control efforts to the four in-wheel motors for providing the desired tire forces. An analytic method is given to distribute the high-level control efforts, without using the num…
Observer-Based Robust Control for Hydraulic Velocity Control System
2013
Published version of an article in the journal: Mathematical Problems in Engineering. Also available from the publisher at: http://dx.doi.org/10.1155/2013/689132 Open access This paper investigates the problems of robust stabilization and robust control for the secondary component speed control system with parameters uncertainty and load disturbance. The aim is to enhance the control performance of hydraulic system based on Common Pressure Rail (CPR). Firstly, a mathematical model is presented to describe the hydraulic control system. Then a novel observer is proposed, and an observed-based control strategy is designed such that the closed-loop system is asymptotically stable and satisfies …
A Laboratory Project for Advanced Control Methods: Control of a Neutralization Process
2003
Abstract A neutralization process is used in a laboratory project for experimenting advanced control techniques. Students may choose among several techniques to experience the behaviour of advanced controller action: adaptive control, GMG control, fuzzy control, self tuning fuzzy control, neural control, neuro-fuzzy control. The experience in advanced self tuning controller based on fuzzy logic is proposed for the control of a neutralization process. The test of a self tuning controller based on fuzzy logic is a very important case because the resulting structure of the controller is easy to implement and modify: the final results are compared with those deriving from the application of a c…
An Adaptive Robust Predictive Current Control for Three-Phase Grid-Connected Inverters
2011
This paper presents an adaptive robust predictive current control (RPCC) for grid-connected three-phase inverters that exhibit zero steady-state current error. The error correction is achieved by means of an adaptive strategy that works in parallel with the deadbeat algorithm, therefore preserving the typical fast response of the predictive law. The resulting control adapts to any particular L or LCL filter by estimation of the resistive part of the filter. As a variety of the RPCC class of control, it offers the best tradeoff between robustness and speed. © 2009 IEEE.
An adaptive control law for robotic manipulator without velocity feedback
2003
In this paper, a new adaptive control law is designed for robotic manipulators, based on the use of reference velocities instead of the actual ones and feedback signals generated from position errors. The law in question is suitable for trajectory tracking and positioning tasks. Its peculiarities are implementation without velocity measurements and estimation, high signal-to-noise ratio in control torques and absence of parameter drift in positioning tasks. Experimental tests are shown with the aim to confirm the validity of the control law and to illustrate its actual effects on the behaviour of the system.