Search results for "Control"
showing 10 items of 13168 documents
Kinematic synthesis of a new 3D printing solution
2016
Low-cost production of metal parts is a challenge nowadays in the Additive Manufacturing world and new methods are being developed. The MIM technique is an innovative approach for 3D printing. This method requires a machine with suitable kinematics capable of generating the adequate movements. The object of this article is the kinematic synthesis of a 5Dofs robot, based on two PKM machines, for additive manufacturing in order to compliant with the requirements of this new technology. Robot kinematics have been optimized by genetic algorithm in order to cover the required workspace and the design of the robot and outline of the control system are also given.
Comparison of KVP and RSI for Controlling KUKA Robots Over ROS
2020
In this work, an open-source ROS interface based on KUKAVARPROXY for control of KUKA robots is compared to the commercial closed-source Robot Sensor Interface available from KUKA. This comparison looks at the difference in how these two approaches communicate with the KUKA robot controller, the response time and tracking delay one can expect with the different interfaces, and the difference in use cases for the two interfaces. The investigations showed that the KR16 with KRC2 has a 50 ms response time, and RSI has a 120 ms tracking delay, with negligible delay caused by the ROS communication stack. The results highlight that the commercial inferface is more reliable for feedback control tas…
Optimization Model to Extend Existing Production Planning and Control Systems for the Use of Additive Manufacturing Technologies in the Industrial Pr…
2018
Abstract The use of additive manufacturing technologies for industrial production is constantly growing. This technology differs from the known production procedures. The areas of scheduling, detailed and sequence planning are particularly important for additive production due to the long print times and flexible use of the production area. Therefore, production-relevant variables are considered and used for the production planning and control (PPC) of additive manufacturing machines. For this purpose, an optimization model is presented which shows a time-oriented build space utilization. In the implementation, a nesting algorithm is used to check the combinability of different models for e…
State Observer with Round-Robin Aperiodic Sampled Measurements with Jitter
2021
International audience; A sampled-data observer is proposed for linear continuous-time systems whose outputs are sequentially sampled via non-uniform sampling intervals repeating a prescribed Round-Robin sequence. With constant sampling intervals (jitter-free case) we provide constructive necessary and sufficient conditions for the design of an asymptotic continuous-discrete observer whose estimation error is input-to-state stable (ISS) from process disturbances and measurement noise. We use a time-varying gain depending on the elapsed time since the last measurement. With non-constant sampling intervals (jitter-tolerant case), our design conditions are only sufficient. A suspension system …
Linearized Piecewise Affine in Control and States Hydraulic System: Modeling and Identification
2018
In this paper, the modeling and identification of a nonlinear actuated hydraulic system is addressed. The full-order model is first reduced in relation to the load pressure and flow dynamics and, based thereupon, linearized over the entire operational state-space. The dynamics of the proportional control valve is identified, analyzed, and intentionally excluded from the reduced model, due to a unity gain behavior in the frequency range of interest. The input saturation and dead-zone nonlinearities are considered while the latter is identified to be close to 10% of the valve opening. The mechanical part includes the Stribeck friction detected and estimated from the experiments. The lineariza…
Efficient Transport Protocol for Networked Haptics Applications
2008
The performance of haptic application is highly sensitive to communication delays and losses of data. It implies several constraints in developing networked haptic applications. This paper describes a new internet protocol called Efficient Transport Protocol (ETP), which aims at developing distributed interactive applications. TCP and UDP are transport protocols commonly used in any kind of networked communication, but they are not focused on real time application. This new protocol is focused on reducing roundtrip time (RTT) and interpacket gap (IPG). ETP is, therefore, optimized for interactive applications which are based on processes that are continuously exchanging data. ETP protocol i…
An algebraic approach for human posture estimation in the sagittal plane using accelerometer noisy signal
2012
International audience; Our aim is to develop an algebraic approach to estimate human posture in the sagittal plane using Inertial Measurement Unit (IMU) providing accelerations and angular velocities. To do it so, we address the issue of the estimation of the amplitude, frequency and phase of a biased and noisy sum of three sinusoidal waveform signals on a moving time horizon. Since the length of the time window is small, the estimation must be done within a fraction of the signal's period. The problem is solved via algebraic techniques (see [38] for the theoretical part concerning this problem). The efficiency of our approach is illustrated by computer simulations.
Crowd-Averse Robust Mean-Field Games: Approximation via State Space Extension
2016
We consider a population of dynamic agents, also referred to as players. The state of each player evolves according to a linear stochastic differential equation driven by a Brownian motion and under the influence of a control and an adversarial disturbance. Every player minimizes a cost functional which involves quadratic terms on state and control plus a cross-coupling mean-field term measuring the congestion resulting from the collective behavior, which motivates the term “crowd-averse.” Motivations for this model are analyzed and discussed in three main contexts: a stock market application, a production engineering example, and a dynamic demand management problem in power systems. For th…
New results on stability analysis and stabilization of time-delay continuous Markovian jump systems with partially known rates matrix
2015
Summary In this note, the problems of stability analysis and controller synthesis of Markovian jump systems with time-varying delay and partially known transition rates are investigated via an input–output approach. First, the system under consideration is transformed into an interconnected system, and new results on stochastic scaled small-gain condition for stochastic interconnected systems are established, which are crucial for the problems considered in this paper. Based on the system transformation and the stochastic scaled small-gain theorem, stochastic stability of the original system is examined via the stochastic version of the bounded realness of the transformed forward system. Th…
Thermo-Hydraulic Modelling and Experimental Validation of an Electro-Hydraulic Compact Drive
2021
Electro-hydraulic compact drives (ECDs) are an emerging technology for linear actuation in a wide range of applications. Especially within the low power range of 5–10 kW, the plug-and-play capability, good energy efficiency and small space requirements of ECDs render this technology a promising alternative to replace conventional valve-controlled linear drive solutions. In this power range, ECDs generally rely on passive cooling to keep oil and system temperatures within the tolerated range. When expanding the application range to larger power classes, passive cooling may not be sufficient. Research investigating the thermal behaviour of ECDs is limited but indeed required for a successful …