Search results for "Copolymer"

Comparative Study of Different Maleic Anhydride Grafted Compatibilizer Precursors toward LDPE/PA6 Blends: Morphology and Mechanical Properties

2005

The study deals with the effectiveness of maleic anhydride grafted styrene-b-ethylene-co-propylene copolymer (SEPMA) as compatibilizer precursor (CP) for blends of low density polyethylene (LDPE) with polyamide-6 (PA). The CP was produced by grafting MA onto SEP in the melt. The specific interactions between the CP and the blends components have been investigated through characterizations of the binary LDPE/CP and PA/CP blends. The compatibilizing efficiency of the MA-grafted SEP, as revealed by the thermal properties and the morphology of the compatibilized blends, has been shown to be excellent. The morphology, as well as the mechanical properties of the compatibilized with SEPMA 75/25 w/…

Emulsion-based synthesis of PLGA-microspheres for the in vitro expansion of porcine chondrocytes.

2007

Abstract The in vitro cell expansion of autologous chondrocytes is of high interest in regenerative medicine since these cells can be used to treat joint cartilage defects. In order to preserve chondrocyte phenotype, while optimizing adhesion on microspheres, several processing parameters for the microsphere synthesis were varied. In this study three different polylactide-co-glycolides were used with differing lactide–glycolide ratios (85:15 and 50:50) and differing inherent viscosities. An emulsion route was established, where the polymer was dissolved in chloroform and then injected into a stirred polyvinyl alcohol–water solution at different polymer concentrations and different stirring …

A new route for the preparation of flexible skin–core poly(ethylene-co-acrylic acid)/polyaniline functional hybrids

2011

Abstract Surface modification of polymeric films is a way to obtain final products with high performance for many specific and ad hoc tailored applications, e.g. in functional packaging, tissue engineering or (bio)sensing. The present work reports, for the first time, on the design and development of surface modified ethylene–acrylic acid copolymer (EAA) films with polyaniline (PANI), with the aim of inducing electrical conductivity and potentially enable the electronic control of a range of physical and chemical properties of the film surface, via a new “grafting from” approach. In particular, we demonstrate that PANI was successfully polymerized and covalently grafted onto flexible EAA su…

Morphology and mechanical properties of extruded ribbons of LDPE/PA6 blends compatibilized with an ethylene-acrylic acid copolymer

2003

Two grades of low density polyethylene (LDPE) were blended with polyamide-6 (PA) in the 75/25 and 25/75 wt/wt ratios and shaped into ribbons with a Brabender single screw extruder. An ethylene-acrylic acid copolymer (EAA) was used in the 2 phr concentration as a compatibilizer precursor (CP). The morphology of the ribbons and its evolution during high temperature annealing were investigated by scanning electron microscopy (SEM). The results confirmed that EAA does actually behave as a reactive compatibilizer for the LDPE/PA blends. In fact, in the presence of EAA, the interfacial adhesion is improved, the dispersion of the minor phase particles is enhanced and their tendency toward fibrilla…

Dexamethasone dipropionate loaded nanoparticles of α-elastin-g-PLGA for potential treatment of restenosis.

2013

A graft copolymer of α-elastin with poly(lactic-co-glycolic) acid (PLGA) has been synthesized and successfully employed to produce nanoparticles. Exploiting the known biological activity of α-elastin to promote the maintenance of smooth muscle cells (SMCs) contractile phenotype and the antiproliferative effect of glucocorticoids, the aim of this research was to produce drug-loaded nanoparticles suitable for potential treatment of restenosis. In particular, nanoparticles of α-elastin-g-PLGA with a mean size of 200 nm have been produced and loaded with dexamethasone dipropionate (10% w/w), chosen as a model drug that inhibits proliferation of vascular SMCs. These nanoparticles are able to pro…

Structural and Thermal Properties of Ethylene-Norbornene Copolymers Obtained Using Vanadium Homogeneous and SIL Catalysts

2020

The series of ethylene-norbornene (E-NB) copolymers was obtained using different vanadium homogeneous and supported ionic liquid (SIL) catalyst systems. The 13C and 1H NMR (carbon and proton nuclear magnetic resonance spectroscopy) together with differential scanning calorimetry (DSC) were applied to determine the composition of copolymers such as comonomer incorporation (CNB), monomer dispersity (MD), monomer reactivity ratio (re), sequence length of ethylene (le) and tetrad microblock distributions. The relation between the type of catalyst, reaction conditions and on the other hand, the copolymer microstructure, chain termination reaction analyzed by the type of unsaturation are discusse…

An Extended Physico-Chemical Study of Nanocomposites Based on Block Copolymers and Inorganic Nanoparticles

2009

Nanocomposites based on clay nanoparticles and block copolymer

2008

Morphology of nanocomposites from ethylene-acrylic acid copolymers

2005

AbstractNew nanocomposites have been prepared by melt-compounding from commercial ethylene-acrylic acid copolymers (EAA) of different molar mass, molecular structure (branched or linear) and AA concentration, and a Zn-ionomer, with three commercial clays containing different proportions of the same organic modifier (dimethyldi(hydrogenated tallow)ammonium ion). Their morphology has been preliminarily investigated by X-ray scattering and transmission electron microscopy. The nanocomposites showed disordered intercalated morphology, with an expansion of the average gallery height, which appears to depend quite strongly on the molecular architecture of the EAA, whereas the other investigated v…

One-pot synthesis of PbS NP/sulfur-oleylamine copolymer nanocomposites via the copolymerization of elemental sulfur with oleylamine

2014

A novel synthetic and processing strategy for converting elemental sulfur into polymeric and nanocomposite materials is reported. We describe a facile one-pot reaction using elemental sulfur and oleylamine as comonomers to prepare high sulfur content copolymers and lead sulfide nanoparticle (PbS NP) nanocomposites. This process enables the preparation of solution processable copolymers and nanocomposites, where the loading and dispersion of PbS NP inclusions could be precisely controlled. We demonstrate the dual roles of oleylamine with sulfur for both the copolymerization of sulfur copolymers as well as the in situ synthesis of PbS NPs in a one-pot fashion.