Search results for "Copolymer"
showing 10 items of 1003 documents
Controlled radical polymerization of alkyl acrylates and styrene using a half-sandwich molybdenum(III) complex containing diazadiene ligands
2003
Abstract The half-sandwich molybdenum(III) complex CpMoCl 2 ( i Pr 2 -dad) ( i Pr 2 -dad= i Pr–NCH–CHN– i Pr) proved to be an effective metal catalyst for the controlled radical polymerization of methyl acrylate, butyl acrylate, and styrene. In conjunction with an alkyl iodide [R–I: CH 3 CH(COOEt)I] as an initiator and in the presence or absence of Al(O– i -Pr) 3 as a co-catalyst, the molybdenum-based system gave polymers with narrow molecular weight distributions. The in situ addition of styrene to a macroinitiator of poly(methylacrylate) afforded an AB-type block copolymer.
Polymerization of an activated ester monomer based on 4-vinylsulfonic acid and its polymer analogous reaction
2011
Homopolymers containing sulfonic ester side groups were synthesized by reversible addition–fragmentation chain transfer (RAFT) polymerization utilizing benzyl dithiobenzoate, cumyl dithiobenzoate, and 4-cyano-4-((thiobenzoyl)sulfanyl)pentanoic acid as chain transfer agents. Likewise diblock copolymers containing poly(styrene), poly(octylstyrene) and poly(pentafluorostyrene) as the second block were synthesized. Additionally, nitroxide mediated polymerization (NMP) was investigated for the synthesis of a homopolymer as well as for a diblock copolymer. Furthermore, the post-polymerization functionalization with various amines to yield the respective sulfonamides was conducted. The conversion …
Synthesis and olefin homo- and copolymerization behavior of new vanadium complexes bearing [OSSO]-type ligands
2017
Novel vanadium complexes bearing [OSSO]-type ligands having two phenolato units linked through the –CH2S(CH2)4SCH2– (1V) or –CH2S(CH2)2SCH2– (2V) bridge are synthesized with good yields by reacting a deprotonated ligand with VCl4. They are then used in ethylene (co)polymerization after activation with EtAlCl2 and Et2AlCl. In the presence of EtAlCl2, both complexes promote ethylene polymerization with very high activities, over 4 × 107 g/(mol h), leading to PEs with high molecular weight and narrow molecular weight distribution. The prepared complexes exhibit lower activity for ethylene/1-octene copolymerization. It is also revealed that the catalyst based on the –CH2S(CH2)4SCH2– bridged com…
Microstructure of ethylene-1-hexene and ethylene-1-octene copolymers obtained over Ziegler–Natta catalysts supported on MgCl 2 (THF) 2
2001
Abstract The ethylene copolymerizations with 1-hexene or 1-octene in the presence of hydrogen using three catalysts, MgCl 2 (THF) 2 /VOCl 3 /Et 2 AlCl, MgCl 2 (THF) 2 /VCl 4 /Et 2 AlCl, MgCl 2 (THF) 2 /TiCl 4 /Et 2 AlCl, were investigated. It was found that the addition of hydrogen into the copolymerization feed reduces the molecular weight of the copolymers produced and decreases the activity of all the studied catalysts. The microstructure of the copolymers obtained was determined on the basis of 13 C NMR investigations and the reactivity ratios of the comonomers were calculated. The lack of tendency of the olefin comonomers to the creation of the polymer block was confirmed. It was found…
DFT Study of Ethylene and Propylene Copolymerization over a Heterogeneous Catalyst with a Coordinating Lewis Base
2005
The copolymerization of ethylene and propylene over a heterogeneous Ti(III) catalyst containing tetrahydrofuran (THF) as a Lewis base and MgCl2 as a support has been studied by means of DFT. Two feasible models of active sites have been examined thoroughly, and one of them turned out to be favorable in terms of both catalytic activity and the microstructure of the resulting polymer. The external barriers of olefin insertion for this model range from 3.1 to 16.0 kcal/mol and are influenced by a variety of factors, such as the structure of the growing polymer chain and the nature of the incoming olefin as well as the orientation of the ligands around the titanium atom. Stochastic simulations …
Vanadium catalysts for ethylene-norbornene copolymerization
2020
Cyclic olefin copolymers (COCs) are a promising group of materials with specific, projectable properties. In this group, copolymers of ethylene and norbornene are of particular interest. A variety of transition metal complexes are used for their synthesis, mostly elements from group 4. This review presents the application of vanadium catalysts with various types of ligands in the synthesis of ethylene-norbornene copolymers. The influence of ligands and reaction conditions on the activity of catalyst and selected properties of copolymers are described in this paper.
Ethylene/1-olefin copolymerization behaviour of vanadium and titanium complexes bearing salen-type ligand
2013
Ethylene/1-olefin copolymerization using vanadium and titanium complexes bearing tetradentate [O,N,N,O]-type ligand and EtAlCl2 or MAO as a cocatalyst is carried out. In the presence of the vanadium complex activated with EtAlCl2 is observed (a) negative “comonomer effect”, (b) high comonomer incorporation and narrow chemical composition distribution (CCD), (c) unexpected copolymer microstructure, and (d) increased molecular weight of copolymers when compared with the homopolymer. In contrast, titanium catalyst gives copolymers with lower 1-olefin content and broad CCD. Supported complexes show higher activity, lower 1-olefins incorporation and give copolymers with ultra high molecular weig…
Improved performance in flexible organic solar cells by using copolymeric phase-separation modulators
2018
One of the main problems related to the low performance of the organic solar cells (OSCs), concerns the low mobility of the materials constituting the heterojunction. Indeed, the poor charge transport in the active layer is the principal cause of a competition between separation and recombination of the photogenerated carriers. In this regard, a major obstacle to enhance OSCs efficiency is developing strategies to optimize the exciton dissociation and, consequently, the charge collection at the electrodes. Donor and acceptor systems must be well mixed on the length scale of 5 – 20 nm (exciton diffusion length) to meet the criteria for efficient exciton dissociation. In addition, the network…
A real time immunoassay in alumina membranes
2014
To date, photonic biosensing with porous membranes has produced slow responses and long sensing times, due to the narrow (less than 100 nm) closed end pores of the membranes used. Recently, polarimetry was used to demonstrate analyte flow through, and real time biosensing in, free-standing porous alumina membranes. Here, we demonstrate how an improved functionalization technology, has for the first time enabled a real-time immunoassay within a porous membrane with a total assay time below one hour. With the new approach, we show a noise floor for individual biosensing measurements of 3.7 ng/ml (25 pM), and a bulk refractive index detection limit of 5×10-6 RIU, with a standard deviation of l…
Modification of EVOH copolymers with e-caprolactone: synthesis and compatibilization effects in PE/PVC blends
2001
Polyethylene-polycaprolactone graft copolymers with different chemical structures (i.e. different number and length of PCL grafts and molecular weight of PE backbone) were synthesized from various EVOH copolymers and e-caprolactone, using Aluminum isopropoxide as catalyst, and were tested for their compatibilizing capability in PE/PVC blends. PE and PCL segments in the graft copolymers were found completely immiscible, while PCL segments of the graft copolymers were found completely miscible with PVC. When graft copolymers were added to PE/PVC blends they proved to be good agents for the dispersion of PVC phase in the PE matrix. SEM showed also improved adhesion between the dispersed PVC ph…