Search results for "Crystallinity"
showing 10 items of 248 documents
ChemInform Abstract: Continuous Hydrothermal Synthesis of Nanometric BaZrO3in Supercritical Water.
2008
Abstract Nanocrystalline barium zirconate (BaZrO 3 ) was synthesized using a hydrothermal synthesis process working in supercritical conditions and in a continuous way. By this method, we succeeded in the continuous and rapid production of nanopowders. As a preliminary work three barium precursors have been investigated: barium hydroxide (Ba(OH) 2 ), barium acetate (Ba(CH 3 COO) 2 ) and barium nitrate (Ba(NO 3 ) 2 ). Two of them (Ba(CH 3 COO) 2 and Ba(NO 3 ) 2 ) led to the pure perovskite phase. Then an experimental design has been conducted in order to determine the influence of the experimental parameters on the crystallinity and the grain size of the final product.
Cation-induced self-assembly of an amphiphilic perylene diimide derivative in solution and Langmuir–Blodgett films
2015
Abstract A novel amphiphilic perylenetetracarboxylic diimide (PDI) derivative, N-(4′-benzo-15-crown-5-ether)-N-hexyl-1,7-di(4-tert-butyl-phenoxy)perylen-3,4,9,10-tetracarboxylic diimide (15C5PDI), has been synthesized and characterized. Dimerization of 15C5PDI is induced in CHCl 3 solution with the present of K + , resulting in the formation of the slipped co-facial J -aggregates, as revealed by absorption and fluorescence spectroscopies. Analysis of the surface pressure–area ( π – A ) isotherms and spectral change for the monolayer formed at the air/water interface, disclosed that 15C5PDI molecules adopted the H -type aggregation mode with a face-to-face configuration and edge-on orientati…
Physicochemical Properties of New Dicationic Ether-Functionalized Low Melting Point Ammonium Salts
2010
Eleven new and one previously known but insufficiently characterized dicationic quaternary ammonium (QA) salts were synthesized and characterized. They contain an ethoxy ethyl group either in a side chain and/or as spacer of the diammonium cation and have bromide, hexafluorophosphate (PF6–), bis(trifluoromethanesulfonyl)imide (TFSI), or trifluoromethanesulfonate (TFMS) as an anion. 1H and 13C techniques, mass spectrometry, and elemental analysis together with X-ray diffraction and thermoanalytical methods were used for their characterization both in the liquid and solid state. In addition, residual water content and viscosity measurements were made for the two room temperature ionic liquid…
Synthesis and characterization of ethylene-1-hexene copolymers prepared by using MgCl2(THF)2-supported Ziegler-Natta catalysts
2000
Ethylene was copolymerized with 1-hexene over vanadium (VOCl3 and VCl4) and titanium (TiCl4) catalysts supported on MgCl2(THF)2 and activated with Et2AlCl. So far these catalyst systems have not been known as initiators of ethylene-1-hexene copolymerization. The vanadium catalysts were more active than the titanium catalyst and, at identical comonomer concentrations in the feed, gave rise to a greater incorporation of 1-hexene into the copolymer. Even at relatively low fractions of 1-hexene, the MgCl2(THF)2-supported catalysts affected much the copolymer properties like density, melting point and crystallinity.
Effect of electron-beam irradiation on structure of ultra high molecular weight polyethylene used in medical implants
2004
Określono wpływ napromieniania strumieniem elektronów dawką równoważną stosowanej w praktyce podczas sterylizacji radiacyjnej endoprotez chirurgicznych (26 kGy) oraz dwukrotnie większą (2 . 26 kGy) na zmianę struktury PE-UHMW o nazwie handlowej „,Chirulen 1120”' (tabela 1) służącego do otrzymywania panewek endoprotez biodrowych. Metodą FT-IR zbadano zmiany strukturalne polimeru, stwierdzając głównie występowanie skutków jego utlenienia (wzrost udziału grup karbonylowych typu ketonowego, estrowego i nadestrowego, grup hydroksylowych oraz winylowych) (rys. 1). Metodą GPC stwierdzono, że napromienianie powoduje także częściową degradację makrocząsteczek (zmniejszenie ciężaru cząsteczkowego o j…
Tailored electrospun nanofibrous polycaprolactone/gelatin scaffolds into an acid hydrolytic solvent system
2018
[EN] Blended nanofibrous scaffolds based on polycaprolactone (PCL) and gelatin (Ge) were successfully prepared. A formic/acetic acid (1:1) mixture was used to dissolve PCL/Ge blends from 100/0 to 20/80 %wt in steps of 10 %wt. The hydrolysis of the PCL diluted in the formic/acetic acid mixture was considered as a method for tailoring the surface morphology and physicochemical features of the nanofibrous PCL/Ge scaffolds as a function of the dissolution time. The fibre diameter remained in the nanoscale range for all the studied scaffolds, which is crucial to mimic the extra-cellular matrix size. The reduction of the intrinsic viscosity, molar mass and hydrodynamic radius found for the PCL mo…
Impact of electron beam irradiation on fish gelatin film properties
2016
International audience; The objective of this work was to display the effect of electron beam accelerator doses on properties of plasticized fish gelatin film. Electron spin resonance indicates free radical formation during irradiation, which might induce intermolecular cross-linking. Tensile strength for gelatin film significantly increases after irradiation (improved by 30% for 60 kGy). The vapour permeability is weakly affected by irradiation. Surface tension and its polar component increase significantly and are in accordance with the increase of wettability. So, irradiation may change the orientation of polar groups of gelatin at the film surface and crosslink the hydrophobic amino aci…
NOx selective catalytic reduction at high temperatures with mixed oxides derived from layered double hydroxides
2012
[EN] Mixed oxides derived from layered double hydroxides (LDHs) have been investigated as potential catalysts for the NOx removal at high temperatures. The best results were obtained with Co–Al mixed oxides derived from LDHs that are active at 750 ◦C in the presence of oxygen and water. These catalysts could reduce or/and decompose the NOx formed in the dense phase of the FCC regenerator, being deactivated at oxygen concentrations higher than 1.5%. Nevertheless this deactivation is not permanent and they would be regenerated after reduction with hydrogen at 530 ◦C. The influence of the layered double hydroxides (LDHs) preparation method on the catalyst activity was studied, observing that t…
Silver-loaded nanoparticles affect ex-vivo mechanical behavior and mineralization of dentin
2019
Background: The aim was to evaluate the effect of silver loaded nanoparticles (NPs) application on the triboscopic, crystallographic and viscoelastic properties of demineralized dentin. Polymethylmetacrylate-based NPs and Ag loaded NPs were applied on demineralized dentin. Material and Methods: Treated and untreated surfaces were probed by a nanoindenter to test viscoelasticity, and by atomic force microscopy to test nanoroughness and collagen fibril diameter. X-ray diffraction and transmission electron microscopy through selected area diffraction and bright-field imaging were also used. Results: Dentin treated with Ag-NPs attained the lowest complex modulus, and the highest tan delta value…
Nature of activating effect of two-step polymerization of propylene
1999
The prepolymerization effect on propylene polymerization in the presence of a TiCl 3 -based catalyst, modified by di-n-buthyl ether, was studied. The influence of prepolymerization on the electron spin resonance spectra and morphology of the catalyst, as well as the properties and the morphology of both prepolymer and regular polymerization products, was investigated. The polymer morphology was evaluated through scanning electron microscopy, polymer bulk density, and particle size distribution. Some evidence of the enhancement effect of prepolymerization on the catalyst activity and stereospecificity was obtained. No influence from prepolymerization was observed on molecular weight and its …