Search results for "DETECTOR"
showing 10 items of 3491 documents
Dynamic Distributed Intrusion Detection for Secure Multi-Robot Systems
2009
A general technique to build a dynamic and distributed intrusion detector for a class of multi–agent systems is proposed in this paper, by which misbehavior in the motion of one or more agents can be discovered. Previous work from the authors has focused on how to distinguish the behavior of a misbehaving agent in a completely distributed way, by developing a solution where agents act as local monitors of their neighbors and use locally sensed information as well as data received from other monitors at a particular time. In this work, we improve the system detection capability by allowing monitors to use information collected at different instants and thus realizing a dynamic state observer…
Development of the control card for the digitizers of the second generation electronics of AGATA
2012
In this work, the features and development process of the novel control card for the digitizers of AGATA are presented. The board is part of the new hardware proposed for the electronic system of the experiment. In particular, the control card provides the sampling clock for the digitizers, contributes to the synchronization of the digital data and performs the slow control of its associated digitizer cards.
Synchronization techniques for power quality instruments
2004
The measurement of voltage characteristics in power systems requires the accurate estimation of the power supply frequency and signal synchronization, even in the presence of disturbances. The authors developed and tested two innovative techniques for instrument synchronization. The first is based on signal spectral analysis techniques performed by means of the Chirp-Z transform analysis. The second is a phase-locked loop (PLL) software based on a time-domain coordinate transformation and an innovative phase-detection technique. To evaluate how synchronization techniques are adversely affected by the application of a disturbing influence, experimental tests were carried out, taking into acc…
Mechanical construction and installation of the ATLAS tile calorimeter
2013
This paper summarises the mechanical construction andinstallation of the Tile Calorimeter for the ATLASexperiment at the Large Hadron Collider in CERN, Switzerland. The TileCalorimeter is a sampling calorimeter using scintillator as the sensitivedetector and steel as the absorber and covers the central region of the ATLASexperiment up to pseudorapidities ±1.7. The mechanical construction ofthe Tile Calorimeter occurred over a periodof about 10 years beginning in 1995 with the completionof the Technical Design Report and ending in 2006 with the installationof the final module in the ATLAS cavern. Duringthis period approximately 2600 metric tons of steel were transformedinto a laminated struc…
Latest Frontier Technology and Design of the ATLAS Calorimeter Trigger Board Dedicated to Jet Identification for the LHC Run 3
2016
To cope with the enhanced luminosity of the beam delivered by the Large Hadron Collider (LHC) in 2020, the “A Toroidal LHC ApparatuS” (ATLAS) experiment has planned a major upgrade. As part of this, the trigger at Level1 based on calorimeter data will be upgraded to exploit fine-granularity readout using a new system of Feature Extractors, which each use different physics objects for the trigger selection. The article focusses on the jet Feature EXtractor (jFEX) prototype, one of the three types of Feature Extractors. Up to 2 TB/s have to be processed to provide jet identification (including large area jets) and measurements of global variables within few hundred nanoseconds latency budget.…
Commissioning Experience with the ATLAS Level-1 Calorimeter Trigger System
2007
The ATLAS Level-1 Calorimeter Trigger is one of the main elements of the first stage of event selection for the ATLAS experiment at the LHC. The input stage consists of a mixed analogue/digital component taking trigger sums from the ATLAS calorimeters. The trigger logic is performed in a digital, pipelined system with several stages of processing, largely based on FPGAs, which perform programmable algorithms in parallel with a fixed latency to process about 300 Gbyte/s of input data. The real-time output consists of counts of different types of physics objects and energy sums. The production of final modules started in 2006, and installation of these modules and the necessary infrastructure…
Video-Based Heartbeat Rate Measuring Method Using Ballistocardiography
2017
International audience; Video-based heartbeat rate measurement is a rapidly growing application in remote health monitoring. Video-based heartbeat rate measuring methods operate mainly by estimating photoplethysmography or ballistocardiography signals. These methods operate by estimating the microscopic color change in the face or by estimating the microscopic rigid motion of the head/facial skin. However, the robustness to motion artifacts caused by illumination variance and motion variance of the subject poses main challenge. We present a video-based heartbeat rate measuring framework to overcome these problems by using the principle of ballistocardiography. In this paper, we proposed a b…
<title>Optical power and irradiance microprocessor meter for fiber optic sensors and networks testing</title>
1999
In this paper are presented the optical power and irradiance meter with `an intelligent opto sensor' and the microprocessor measurement system. A designed and programmed microprocessor unit allows to measure a light power from 1 nW to 2 mW and an irradiance of light from 50 nW/cm2 to 150 mW/cm2 (with accuracy 0.2%) including sensor's and spectral responsively characteristic. It's built for measuring fiber optic systems, mainly for examination and testing of the optoelectronic sensor's structure (relatively small surface of the light detectors comparing to the partition of measured value) and it's an ideal detector for the fiber optic sensors and networks.© (1999) COPYRIGHT SPIE--The Interna…
The "Livio Scarsi" X-Ray Facility at University of Palermo for Device Testing
2015
In this work, we report on the characteristics of the Livio Scarsi X-ray facility at University of Palermo. The facility is able to produce low energy X rays, within the energy range of 0.1-60 keV, with fluence rates ranging from 105-108 photons/mm2 s. The laboratory is equipped with an innovative digital detection system, based on semiconductor detectors (Si and CdTe detectors), able to provide accurate and precise estimation of the fluence rate, the energy and the exposure of X rays, even at high counting rate conditions. Instrumentation for electrical characterization (DC-AC) of semiconductor devices, for both off-line and on-line (i.e. during the irradiation) measurements, is also avail…
The sROD demonstrator for the ATLAS Tile Calorimeter Upgrade
2012
This work presents the early design of the super Read-Out Driver (sROD) demonstrator board for the Tile Calorimeter Demonstrator project. This project aims to test the new readout electronics architecture for the Phase 2 Upgrade of the ATLAS Tile Calorimeter, replacing the front-end electronics of one complete drawer with the new electronics during the Long Shutdown 2013, in order to evaluate its performance. The sROD demonstrator board will receive and process data from 48 channels. Moreover the sROD demonstrator board will send preprocessed data to the present trigger system, and will transmit trigger control and timing information (TTC) and Detector Control System (DCS) commands to the f…